main
Ray Publish 0.1.1 f34ca7f
{
  "slug": "bq296215dsgr",
  "version": "0.1.1",
  "type": "component",
  "description": "Texas Instruments Battery Management, WSON-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "bq296215dsgr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "bq296215dsgr.kicad_sym",
    "bq296215dsgr.kicad_mod",
    "bq296215dsgr.glb",
    "bq296215dsgr.step",
    "bq296215dsgr.lbr",
    "docs/hero.png",
    "docs/bq296215dsgr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "bq296215dsgr-etched.step",
    "bq296215dsgr-hero.glb",
    "bq296215dsgr-hero.overlay.json"
  ],
  "component": {
    "mpn": "BQ296215DSGR",
    "manufacturer": "Texas Instruments",
    "package": "WSON-8-EP(2x2)",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "Battery Management",
    "datasheet": "https://www.ti.com/cn/lit/gpn/bq2962",
    "parts": {
      "symbol": "bq296215dsgr.kicad_sym",
      "footprint": "bq296215dsgr.kicad_mod",
      "model_3d": "bq296215dsgr-hero.glb",
      "model_3d_plain": "bq296215dsgr.glb",
      "model_3d_step": "bq296215dsgr-etched.step",
      "model_3d_step_plain": "bq296215dsgr.step",
      "lbr": "bq296215dsgr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2869831",
      "digikey": "296-BQ296215DSGRTR-ND",
      "mouser": "595-BQ296215DSGR"
    },
    "distributor_check": {
      "checked_at": "2026-09-27T02:01:20Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-BQ296215DSGRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-BQ296215DSGR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD",
        "type": "power_in",
        "description": "Power supply input for device operation with recommended supply voltage range from 4V to 20V for full functionality."
      },
      {
        "number": "2",
        "name": "V4",
        "type": "input",
        "description": "Analog input for fourth cell voltage detection (V4-V3) with input range 0-5V and low input current less than 100 nanoamperes."
      },
      {
        "number": "3",
        "name": "V3",
        "type": "input",
        "description": "Analog input for third cell voltage detection (V3-V2) with input range 0-5V and low input current less than 100 nanoamperes."
      },
      {
        "number": "4",
        "name": "V2",
        "type": "input",
        "description": "Analog input for second cell voltage detection (V2-V1) with input range 0-5V and low input current less than 100 nanoamperes."
      },
      {
        "number": "5",
        "name": "V1",
        "type": "input",
        "description": "Analog input for first cell voltage detection (V1-VSS) with input range 0-5V and low input current less than 100 nanoamperes."
      },
      {
        "number": "6",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground connection to integrated circuit ground and lowest battery cell negative terminal, serving as reference for all comparisons."
      },
      {
        "number": "7",
        "name": "OUT",
        "type": "output",
        "description": "Analog output for overvoltage fault detection with high-level active drive of 6-8V at 100 µA load and low open-drain voltage of 250-400 mV at 100 µA sink."
      },
      {
        "number": "8",
        "name": "REG",
        "type": "power_out",
        "description": "Regulated 3.0V power supply output with maximum output current of 2 mA, short-circuit current limiting to 4 mA, requiring 0.47 µF external capacitor for stability."
      },
      {
        "number": "9",
        "name": "PWPD",
        "type": "power_in",
        "description": "Exposed thermal pad that should be connected to VSS on printed circuit board for optimal thermal and mechanical performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 32,
        "cost_usd": 0.4252,
        "at": "2026-09-27T02:01:04"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/bq2962",
        "pages": 32,
        "sha256": "e6a927461563434f",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "bq296215dsgr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.82
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7672cac8d88d8679800ef3bf90954e7996ea74e8ddb1f157f2d82bca6b2015e4",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "bq296215dsgr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.82
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ef13770c7dc460380679236afff163278177867e79b26c9b4022009ec71aac43",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "title": "BQ296215DSGR",
  "brief": "Texas Instruments Battery Management, WSON-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "WSON-8-EP(2x2)",
      "Category": "Power Management (PMIC)",
      "Pins": "9"
    }
  },
  "discovery_triggers": [
    "bq296215dsgr"
  ],
  "discovery_pitch": "BQ296215DSGR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "visibility": "public"
}