component
BQ25616RTWT
Public Made by Adomby adom
Texas Instruments Battery Management ICs, WQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296
{
"slug": "bq25616rtwt",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Battery Management ICs, WQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"bq25616rtwt",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"bq25616rtwt.kicad_sym",
"bq25616rtwt.kicad_mod",
"bq25616rtwt.glb",
"bq25616rtwt.step",
"bq25616rtwt.lbr",
"docs/hero.png",
"docs/bq25616rtwt-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"bq25616rtwt-hero.glb",
"bq25616rtwt-hero.overlay.json",
"bq25616rtwt-etched.glb"
],
"component": {
"mpn": "BQ25616RTWT",
"manufacturer": "Texas Instruments",
"package": "WQFN-24-EP(4x4)",
"pin_count": 25,
"category": "Power Supply Chip",
"subcategory": "Battery Management ICs",
"datasheet": "https://www.ti.com/lit/ds/symlink/bq25616rtwt.pdf",
"parts": {
"symbol": "bq25616rtwt.kicad_sym",
"footprint": "bq25616rtwt.kicad_mod",
"model_3d": "bq25616rtwt-hero.glb",
"model_3d_plain": "bq25616rtwt-etched.glb",
"model_3d_step": "bq25616rtwt-etched.step",
"model_3d_step_plain": "bq25616rtwt.step",
"lbr": "bq25616rtwt.lbr"
},
"distributor_links": {
"lcsc": "C2876372",
"digikey": "296-BQ25616RTWTTR-ND",
"mouser": "595-BQ25616RTWT"
},
"distributor_check": {
"checked_at": "2026-11-02T17:28:13Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-BQ25616RTWTTR-ND",
"status": "found"
},
"mouser": {
"pn": "595-BQ25616RTWT",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "VAC",
"type": "power_in",
"description": "Charger input voltage sensing pin; optional external ACFET connects VAC to VBUS, and the ACOV threshold is 14.2 V with UVLO below that level."
},
{
"number": "2",
"name": "ACDRV",
"type": "output",
"description": "Charge pump output that drives an external N-channel ACFET gate with 6 V above VBUS when VAC is below the 14.2 V ACOV threshold and above UVLO; leave floating if external OVP is not used."
},
{
"number": "3",
"name": "D+",
"type": "bidirectional",
"description": "Positive USB data line used for D+/D- based host and charging port detection, rated up to 7 V absolute maximum."
},
{
"number": "4",
"name": "D-",
"type": "bidirectional",
"description": "Negative USB data line used for D+/D- based host and charging port detection, rated up to 7 V absolute maximum."
},
{
"number": "5",
"name": "STAT",
"type": "output",
"description": "Open-drain charger status output that needs a 10 kΩ pull-up to a logic rail and indicates charge in progress (LOW), charge complete or sleep (HIGH), or fault (1 Hz blink); absolute maximum sink current is 6 mA."
},
{
"number": "6",
"name": "OTG",
"type": "input",
"description": "Boost mode enable input where a HIGH level enables boost mode, and the pin must not be left floating."
},
{
"number": "7",
"name": "PG",
"type": "output",
"description": "Open-drain active-low power good output that needs a 10 kΩ pull-up and goes LOW for a good input between UVLO and ACOV with input current limit above 30 mA."
},
{
"number": "8",
"name": "ILIM",
"type": "input",
"description": "Sets the input current limit IINDPM = KILIM/RILIM for an unknown adapter over an acceptable range of 500 mA to 3200 mA."
},
{
"number": "9",
"name": "CE",
"type": "input",
"description": "Charge enable input where driving the pin LOW enables battery charging."
},
{
"number": "10",
"name": "ICHG",
"type": "input",
"description": "Sets the charge current limit ICHG = KICHG/RICHG via a resistor to ground over an acceptable range of 300 mA to 3000 mA."
},
{
"number": "11",
"name": "TS",
"type": "input",
"description": "Battery NTC temperature qualification input whose window is set by a resistor divider from REGN; charge and boost are suspended when TS is out of range."
},
{
"number": "12",
"name": "VSET",
"type": "input",
"description": "Sets the default battery charge voltage by resistor to GND: float gives 4.208 V, below 500 Ω gives 4.352 V, and 5 kΩ to 25 kΩ gives 4.100 V."
},
{
"number": "13",
"name": "BAT",
"type": "power_in",
"description": "Battery connection to the positive terminal of the battery pack, with the internal sense resistor between SYS and BAT; a 10 µF capacitor is required close to this pin."
},
{
"number": "14",
"name": "BAT",
"type": "power_in",
"description": "Battery connection to the positive terminal of the battery pack, with the internal sense resistor between SYS and BAT; a 10 µF capacitor is required close to this pin."
},
{
"number": "15",
"name": "SYS",
"type": "power_out",
"description": "System output connection point with the internal sense resistor between SYS and BAT; a 10 µF minimum capacitor is required close to this pin."
},
{
"number": "16",
"name": "SYS",
"type": "power_out",
"description": "System output connection point with the internal sense resistor between SYS and BAT; a 10 µF minimum capacitor is required close to this pin."
},
{
"number": "17",
"name": "GND",
"type": "power_in",
"description": "Power ground and signal ground for the device."
},
{
"number": "18",
"name": "GND",
"type": "power_in",
"description": "Power ground and signal ground for the device."
},
{
"number": "19",
"name": "SW",
"type": "passive",
"description": "Switching node connected to the output inductor and to the source of the HSFET and drain of the LSFET; a 0.047 µF bootstrap capacitor connects from SW to BTST."
},
{
"number": "20",
"name": "SW",
"type": "passive",
"description": "Switching node connected to the output inductor and to the source of the HSFET and drain of the LSFET; a 0.047 µF bootstrap capacitor connects from SW to BTST."
},
{
"number": "21",
"name": "BTST",
"type": "power_in",
"description": "Positive supply for the high-side driver, connected to the bootstrap diode cathode, with a 0.047 µF bootstrap capacitor from SW."
},
{
"number": "22",
"name": "REGN",
"type": "power_out",
"description": "Low-side driver supply output connected to the bootstrap diode anode, requiring a 4.7 µF 10 V ceramic capacitor close to the IC to analog GND."
},
{
"number": "23",
"name": "PMID",
"type": "power_in",
"description": "Connected to the drain of the RBFET and HSFET, requiring a 10 µF capacitor to GND."
},
{
"number": "24",
"name": "VBUS",
"type": "power_in",
"description": "Charger input voltage with the internal RBFET between VBUS and PMID, requiring a 1 µF ceramic capacitor to GND placed close to the device; absolute maximum is 22 V."
},
{
"number": "25",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The exposed Thermal Pad is listed in Table 7-1 as a ground reference but has no pin number printed o"
],
"pages_sent": 13,
"cost_usd": 0.0301,
"at": "2026-11-02T17:28:05"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/bq25616rtwt.pdf",
"pages": 50,
"sha256": "9c125bb15fce80e0",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 25,
"described": 25,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "bq25616rtwt.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.0,
4.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "bq25616rtwt-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.0,
4.0,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "f49af953c2410f7f22a250fcd0e01c0d9b86d981cc3e0552a33a88c689040437",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}