main
History Download
Ray Initial commit: component/bq25176mdsgr 586b4ea

BQ25176MDSGR

Texas Instruments · Battery Management · WSON-8

BQ25176MDSGR from Texas Instruments, in a WSON-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input power connected to external DC supply; bypass with at least 1-μF capacitor to GND placed close to IC.
2 ISET input Programs device fast-charge current via external resistor to GND with range 30 kΩ (10 mA) to 375 Ω (800 mA) per ICHG = KISET/RISET.
3 BIAS input Bias sense pin; connect external 10-kΩ resistor to GND or use as charging disable pin by pulling to GND via external NMOS.
4 GND power_in Ground pin.
5 STAT output Open-drain charger status output; pulls LOW for charge in progress, HIGH for charge complete or disabled, blinks at 1 Hz for fault.
6 /PG output Open-drain power good output; pulls LOW when VIN > VIN_LOWV and VOUT + VSLEEPZ < VIN < VIN_OV via 10-kΩ pull-up resistor.
7 VSET input Programs regulation voltage for OUT pin via pull-down resistor with valid range 18.2 kΩ to 100 kΩ; ±1% tolerance with <200 ppm/°C temperature coefficient recommended.
8 OUT power_out Battery connection pin; system load may be connected in parallel to battery; bypass with at least 1-μF capacitor to GND placed close to IC.
9 Thermal Pad passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-8
Category Power Management (PMIC)
Pins 9

CAD (KiCad official)

  • Symbol: BQ25176MDSGR
  • Footprint: Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm
  • 3D model: WSON-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: bq25176mdsgr-etched.step / bq25176mdsgr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); bq25176mdsgr.step / bq25176mdsgr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 fa9d702b1a3a1e62, retrieved 2026-10-01, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF