BQ25060DQCR

{
  "slug": "bq25060dqcr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Battery Management, WSON-10-EP(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "bq25060dqcr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "bq25060dqcr.kicad_sym",
    "bq25060dqcr.kicad_mod",
    "bq25060dqcr.glb",
    "bq25060dqcr.step",
    "bq25060dqcr.lbr",
    "docs/hero.png",
    "docs/bq25060dqcr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "BQ25060DQCR",
    "manufacturer": "Texas Instruments",
    "package": "WSON-10-EP(2x3)",
    "pin_count": 11,
    "category": "Power Management (PMIC)",
    "subcategory": "Battery Management",
    "datasheet": "https://www.ti.com/cn/lit/gpn/bq25060",
    "parts": {
      "symbol": "bq25060dqcr.kicad_sym",
      "footprint": "bq25060dqcr.kicad_mod",
      "model_3d": "bq25060dqcr-etched.glb",
      "model_3d_plain": "bq25060dqcr.glb",
      "model_3d_step": "bq25060dqcr-etched.step",
      "model_3d_step_plain": "bq25060dqcr.step",
      "lbr": "bq25060dqcr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2835501",
      "digikey": "296-27486-2-ND",
      "mouser": "595-BQ25060DQCR"
    },
    "distributor_check": {
      "checked_at": "2026-09-27T02:32:59Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-27486-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-BQ25060DQCR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IN",
        "type": "power_in",
        "description": "Input power supply from USB or AC adapter, 4.4V to 10.2V operating range, 1.2A continuous maximum input current, with 10.5V over-voltage protection."
      },
      {
        "number": "2",
        "name": "ISET",
        "type": "input",
        "description": "Current programming input, connect external 1kΩ to 10kΩ resistor to VSS to program input current limit between 100mA and 1A."
      },
      {
        "number": "3",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground terminal connected to thermal pad and ground plane."
      },
      {
        "number": "4",
        "name": "LDO",
        "type": "power_out",
        "description": "Low dropout regulator output regulated to 4.9V (4.7V to 5.1V range), drives up to 50mA continuous output current."
      },
      {
        "number": "5",
        "name": "TS",
        "type": "input",
        "description": "Battery NTC thermistor monitoring input for temperature sensing, default operating range 0°C to 45°C with hysteresis protection."
      },
      {
        "number": "6",
        "name": "BAT",
        "type": "power_out",
        "description": "Battery connection output and sense input, sources 28-45mA precharge current when VBAT < 2.9V, up to 1.2A maximum continuous output."
      },
      {
        "number": "7",
        "name": "EN",
        "type": "input",
        "description": "Enable control input selecting charger mode, drive high for disable/suspend, low for programmable current mode via ISET, float for USB500 mode."
      },
      {
        "number": "8",
        "name": "CHG",
        "type": "tri_state",
        "description": "Charge status open-drain output pulled low during charging phases, high impedance when battery fully charged, maximum sink current 5mA."
      },
      {
        "number": "9",
        "name": "BGATE",
        "type": "bidirectional",
        "description": "Battery FET gate driver output sourcing typical 50µA to drive external P-channel FET gate, connect to VSS to disable external power path control feature."
      },
      {
        "number": "10",
        "name": "OUT",
        "type": "power_out",
        "description": "System output regulated to minimum 3.4V when input source present, supplies system load up to 1.2A maximum output current."
      },
      {
        "number": "11",
        "name": "ThermalPad",
        "type": "power_in",
        "description": "Exposed thermal pad electrically connected to VSS, provides thermal dissipation path to PCB for heat management, must be soldered for proper thermal and mechanical performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "1/11 pins cited to the wrong page (name found elsewhere): ['11:ThermalPad@p6']"
        ],
        "pages_sent": 27,
        "cost_usd": 0.3082,
        "at": "2026-09-27T02:32:41"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/bq25060",
        "pages": 27,
        "sha256": "29e6b6f949240583",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "bq25060dqcr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          2.975,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ee0ea2d02e2bc495a86d9517d59dcd84d7dd64d201b4cc13b427e56f792207e6",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "bq25060dqcr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          2.975,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3a71c5ae8955a4893b6400b9cd3dbebf6bb33dbc4a38ccfbca09cfca8697a8e7",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}