← Commit history

bq24735rgrr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·9b06b0ca4c · ·parent 5dba560
2 files changed +102−22
package.json+60−20
@@ -68,31 +68,31 @@         "number": "1",         "name": "ACN",         "type": "input",-        "description": "Input current sense resistor negative input; place an optional 0.1\u00b5F ceramic capacitor from ACN to GND for common-mode filtering and a 0.1\u00b5F ceramic capacitor from ACN to ACP for differential-mode filtering; common-mode range 4.5V to 24V."+        "description": "Input current sense resistor negative input; place an optional 0.1µF ceramic capacitor from ACN to GND for common-mode filtering and a 0.1µF ceramic capacitor from ACN to ACP for differential-mode filtering; common-mode range 4.5V to 24V."       },       {         "number": "2",         "name": "ACP",         "type": "input",-        "description": "Input current sense resistor positive input; place a 0.1\u00b5F ceramic capacitor from ACP to GND for common-mode filtering and a 0.1\u00b5F ceramic capacitor from ACN to ACP for differential-mode filtering; common-mode range 4.5V to 24V."+        "description": "Input current sense resistor positive input; place a 0.1µF ceramic capacitor from ACP to GND for common-mode filtering and a 0.1µF ceramic capacitor from ACN to ACP for differential-mode filtering; common-mode range 4.5V to 24V."       },       {         "number": "3",         "name": "CMSRC",         "type": "input",-        "description": "ACDRV charge pump source input; connect to the common source of ACFET (Q1) and RBFET (Q2) through a 4k\u03a9 series resistor to limit in-rush current; sets the reference for the 6V ACDRV gate overdrive."+        "description": "ACDRV charge pump source input; connect to the common source of ACFET (Q1) and RBFET (Q2) through a 4kΩ series resistor to limit in-rush current; sets the reference for the 6V ACDRV gate overdrive."       },       {         "number": "4",         "name": "ACDRV",         "type": "output",-        "description": "Charge pump output driving the adapter NMOS selector (ACFET) and reverse-blocking NMOS (RBFET); outputs VCMSRC + 6V when ACDET is 2.4V-3.15V and VCC is above UVLO; place a 4k\u03a9 series resistor to limit in-rush current; minimum load resistance 500k\u03a9, turn-off resistance 5k\u03a9-7.4k\u03a9."+        "description": "Charge pump output driving the adapter NMOS selector (ACFET) and reverse-blocking NMOS (RBFET); outputs VCMSRC + 6V when ACDET is 2.4V-3.15V and VCC is above UVLO; place a 4kΩ series resistor to limit in-rush current; minimum load resistance 500kΩ, turn-off resistance 5kΩ-7.4kΩ."       },       {         "number": "5",         "name": "ACOK",         "type": "tri_state",-        "description": "AC adapter detection open-drain output; pulled HIGH by external pull-up when ACDET is 2.4V-3.15V, VCC > UVLO, and VCC is \u2265275mV above SRN; pulled LOW internally otherwise; ACOK rising deglitch 150ms (first insertion) or 1.3s (default subsequent); output saturation voltage \u2264500mV at 5mA."+        "description": "AC adapter detection open-drain output; pulled HIGH by external pull-up when ACDET is 2.4V-3.15V, VCC > UVLO, and VCC is ≥275mV above SRN; pulled LOW internally otherwise; ACOK rising deglitch 150ms (first insertion) or 1.3s (default subsequent); output saturation voltage ≤500mV at 5mA."       },       {         "number": "6",@@ -104,19 +104,19 @@         "number": "7",         "name": "IOUT",         "type": "output",-        "description": "Buffered current sense amplifier output selectable between adapter current (ACP-ACN) or charge current (SRP-SRN) via SMBus ChargeOption() bit[5]; output equals 20\u00d7 the differential sense voltage; output range 0V-3.3V, max output current 1mA, max load capacitance 100pF."+        "description": "Buffered current sense amplifier output selectable between adapter current (ACP-ACN) or charge current (SRP-SRN) via SMBus ChargeOption() bit[5]; output equals 20× the differential sense voltage; output range 0V-3.3V, max output current 1mA, max load capacitance 100pF."       },       {         "number": "8",         "name": "SDA",         "type": "bidirectional",-        "description": "SMBus open-drain data I/O; connect to SMBus data line with a 10k\u03a9 pull-up resistor; input low threshold 0.8V, input high threshold 2.1V; output saturation voltage \u2264500mV at 5mA; supports 10kHz-100kHz clock."+        "description": "SMBus open-drain data I/O; connect to SMBus data line with a 10kΩ pull-up resistor; input low threshold 0.8V, input high threshold 2.1V; output saturation voltage ≤500mV at 5mA; supports 10kHz-100kHz clock."       },       {         "number": "9",         "name": "SCL",         "type": "input",-        "description": "SMBus open-drain clock input; connect to SMBus clock line with a 10k\u03a9 pull-up resistor; input low threshold 0.8V, input high threshold 2.1V; supports 10kHz-100kHz clock frequency."+        "description": "SMBus open-drain clock input; connect to SMBus clock line with a 10kΩ pull-up resistor; input low threshold 0.8V, input high threshold 2.1V; supports 10kHz-100kHz clock frequency."       },       {         "number": "10",@@ -128,19 +128,19 @@         "number": "11",         "name": "BATDRV",         "type": "output",-        "description": "Charge pump output driving the battery-to-system NMOS (BATFET); outputs VSRN + 6V to turn on BATFET and VSRN to turn off BATFET; charge pump current limit 40\u00b5A-60\u00b5A; place a 4k\u03a9 series resistor to limit in-rush current; minimum load resistance 500k\u03a9."+        "description": "Charge pump output driving the battery-to-system NMOS (BATFET); outputs VSRN + 6V to turn on BATFET and VSRN to turn off BATFET; charge pump current limit 40µA-60µA; place a 4kΩ series resistor to limit in-rush current; minimum load resistance 500kΩ."       },       {         "number": "12",         "name": "SRN",         "type": "input",-        "description": "Charge current sense resistor negative input and battery voltage sense; connect through a 7.5\u03a9 series resistor then to GND via 0.1\u00b5F for common-mode filtering and across sense resistor via 0.1\u00b5F for differential filtering; output common-mode range 0V-19.2V."+        "description": "Charge current sense resistor negative input and battery voltage sense; connect through a 7.5Ω series resistor then to GND via 0.1µF for common-mode filtering and across sense resistor via 0.1µF for differential filtering; output common-mode range 0V-19.2V."       },       {         "number": "13",         "name": "SRP",         "type": "input",-        "description": "Charge current sense resistor positive input; connect through a 10\u03a9 series resistor to the sense resistor; place a 0.1\u00b5F capacitor between SRP and SRN for differential filtering; SRP capacitance must not exceed 0.1\u00b5F for correct cycle-by-cycle OCP detection."+        "description": "Charge current sense resistor positive input; connect through a 10Ω series resistor to the sense resistor; place a 0.1µF capacitor between SRP and SRN for differential filtering; SRP capacitance must not exceed 0.1µF for correct cycle-by-cycle OCP detection."       },       {         "number": "14",@@ -152,43 +152,43 @@         "number": "15",         "name": "LODRV",         "type": "output",-        "description": "Low-side synchronous power MOSFET gate driver output; connect to low-side n-channel MOSFET gate; turn-on resistance 7.5\u03a9 typ / 12\u03a9 max at VREGN = 6V, 10mA; turn-off resistance 0.9\u03a9 typ / 1.4\u03a9 max; dead time from high side to low side 20ns."+        "description": "Low-side synchronous power MOSFET gate driver output; connect to low-side n-channel MOSFET gate; turn-on resistance 7.5Ω typ / 12Ω max at VREGN = 6V, 10mA; turn-off resistance 0.9Ω typ / 1.4Ω max; dead time from high side to low side 20ns."       },       {         "number": "16",         "name": "REGN",         "type": "power_out",-        "description": "Internal 6V linear regulator output supplied from VCC; regulates to 5.5V-6.5V when VCC > 6.5V and ACDET > 0.6V; current limit 50mA typ (75mA max) during charge; connect a 1\u00b5F ceramic capacitor to GND for stability."+        "description": "Internal 6V linear regulator output supplied from VCC; regulates to 5.5V-6.5V when VCC > 6.5V and ACDET > 0.6V; current limit 50mA typ (75mA max) during charge; connect a 1µF ceramic capacitor to GND for stability."       },       {         "number": "17",         "name": "BTST",         "type": "passive",-        "description": "High-side MOSFET gate driver bootstrap supply; connect a 0.047\u00b5F ceramic capacitor from BTST to PHASE and an external Schottky bootstrap diode from REGN to BTST; a low-side refresh pulse is triggered when VBTST-VPHASE falls below 4.3V typ."+        "description": "High-side MOSFET gate driver bootstrap supply; connect a 0.047µF ceramic capacitor from BTST to PHASE and an external Schottky bootstrap diode from REGN to BTST; a low-side refresh pulse is triggered when VBTST-VPHASE falls below 4.3V typ."       },       {         "number": "18",         "name": "HIDRV",         "type": "output",-        "description": "High-side synchronous power MOSFET gate driver output; connect to high-side n-channel MOSFET gate; turn-on resistance 6\u03a9 typ / 10\u03a9 max at VBTST-VPHASE = 5.5V, 10mA; turn-off resistance 0.65\u03a9 typ / 1.3\u03a9 max; dead time from low side to high side 20ns."+        "description": "High-side synchronous power MOSFET gate driver output; connect to high-side n-channel MOSFET gate; turn-on resistance 6Ω typ / 10Ω max at VBTST-VPHASE = 5.5V, 10mA; turn-off resistance 0.65Ω typ / 1.3Ω max; dead time from low side to high side 20ns."       },       {         "number": "19",         "name": "PHASE",         "type": "passive",-        "description": "High-side MOSFET driver source and PWM switching node; connect to the source of the high-side n-channel MOSFET; voltage range \u22122V to 24V (recommended operating); low-side short-circuit protection monitored between PHASE and GND."+        "description": "High-side MOSFET driver source and PWM switching node; connect to the source of the high-side n-channel MOSFET; voltage range −2V to 24V (recommended operating); low-side short-circuit protection monitored between PHASE and GND."       },       {         "number": "20",         "name": "VCC",         "type": "power_in",-        "description": "Input supply pin; diode-OR connection from AC adapter or battery; operating range 4.5V to 24V; UVLO rising threshold 3.5V-4V, falling hysteresis 340mV; use a 10\u03a9 resistor and 1\u00b5F capacitor to GND as a low-pass filter to limit inrush current."+        "description": "Input supply pin; diode-OR connection from AC adapter or battery; operating range 4.5V to 24V; UVLO rising threshold 3.5V-4V, falling hysteresis 340mV; use a 10Ω resistor and 1µF capacitor to GND as a low-pass filter to limit inrush current."       },       {         "number": "21",         "name": "PowerPAD",         "type": "power_in",-        "description": "Exposed thermal and ground pad beneath the IC; analog ground and power ground are star-connected at this pad; must always be soldered to the PCB with thermal vias to analog and power ground planes; \u03b8JCbot = 4.4\u00b0C/W."+        "description": "Exposed thermal and ground pad beneath the IC; analog ground and power ground are star-connected at this pad; must always be soldered to the PCB with thermal vias to analog and power ground planes; θJCbot = 4.4°C/W."       }     ],     "provenance": {@@ -225,6 +225,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "bq24735rgrr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.52,+          3.52,+          0.9+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "5ff61f1be127772c4954d476f52eb086b7d7b3ab74820fa25f8bd8a4f6a652bc",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "bq24735rgrr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.52,+          3.52,+          0.9+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "1b04d4fefb28df0e1e35095bd2401a9e5f498d90e78e7c0a4a3dd358811f8cc5",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -210,7 +210,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "bq24735rgrr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.52,+          3.52,+          0.9+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "5ff61f1be127772c4954d476f52eb086b7d7b3ab74820fa25f8bd8a4f6a652bc",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "bq24735rgrr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.52,+          3.52,+          0.9+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "1b04d4fefb28df0e1e35095bd2401a9e5f498d90e78e7c0a4a3dd358811f8cc5",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -257,4 +297,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}