main
Ray Publish 0.1.1 75f3ad8
{
  "schema_version": 1,
  "type": "component",
  "slug": "bq24616rget",
  "title": "BQ24616RGET",
  "brief": "Texas Instruments Battery Management, VQFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "bq24616rget",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "BQ24616RGET",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-24(4x4)",
    "pin_count": 25,
    "category": "Power Management (PMIC)",
    "subcategory": "Battery Management",
    "datasheet": "https://www.ti.com/cn/lit/gpn/bq24616",
    "parts": {
      "symbol": "bq24616rget.kicad_sym",
      "footprint": "bq24616rget.kicad_mod",
      "model_3d": "bq24616rget-hero.glb",
      "model_3d_plain": "bq24616rget.glb",
      "model_3d_step": "bq24616rget-etched.step",
      "model_3d_step_plain": "bq24616rget.step",
      "lbr": "bq24616rget.lbr"
    },
    "distributor_links": {
      "lcsc": "C201544",
      "digikey": "296-27632-2-ND",
      "mouser": "595-BQ24616RGET"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T04:29:53Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-27632-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-BQ24616RGET",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "ACN",
        "type": "input",
        "description": "Adapter current-sense resistor, negative input; place 0.1-μF ceramic capacitor from ACN to ACP for differential-mode filtering and optional 0.1-μF capacitor from ACN to GND for common-mode filtering"
      },
      {
        "number": "2",
        "name": "ACP",
        "type": "input",
        "description": "Adapter current-sense resistor, positive input; place 0.1-μF ceramic capacitor from ACN to ACP for differential-mode filtering and 0.1-μF capacitor from ACP to GND for common-mode filtering"
      },
      {
        "number": "3",
        "name": "ACDRV",
        "type": "output",
        "description": "AC adapter-to-system MOSFET driver output; connect through 1-kΩ resistor to gate of ACFET P-channel MOSFET with asymmetrical internal gate drive and break-before-make logic with respect to BATDRV"
      },
      {
        "number": "4",
        "name": "CE",
        "type": "input",
        "description": "Charge-enable active-HIGH logic input; HI enables charge, LO disables charge, with internal 1-MΩ pulldown resistor"
      },
      {
        "number": "5",
        "name": "STAT1",
        "type": "tri_state",
        "description": "Open-drain charge-status pin to indicate various charger operations"
      },
      {
        "number": "6",
        "name": "TS",
        "type": "input",
        "description": "Temperature qualification voltage input for battery pack negative-temperature-coefficient thermistor; program hot and cold temperature window with resistor-divider from VREF to TS to GND"
      },
      {
        "number": "7",
        "name": "TTC",
        "type": "input",
        "description": "Fast-charge safety timer and termination control; connect capacitor from this node to GND to set timer, LOW disables fast-charge timer and termination, HIGH disables fast-charge timer but allows termination"
      },
      {
        "number": "8",
        "name": "PG",
        "type": "tri_state",
        "description": "Open-drain power good status output; active-LOW when IC has valid VCC (not in UVLO or ACOV or SLEEP mode), active-HIGH when IC has invalid VCC"
      },
      {
        "number": "9",
        "name": "STAT2",
        "type": "tri_state",
        "description": "Open-drain charge-status pin to indicate various charger operations"
      },
      {
        "number": "10",
        "name": "VREF",
        "type": "power_out",
        "description": "3.3-V regulated voltage output; place 1-μF ceramic capacitor from VREF to GND pin close to IC for programming voltage and current regulation and TS threshold"
      },
      {
        "number": "11",
        "name": "ISET1",
        "type": "input",
        "description": "Fast-charge current-set input; voltage on ISET1 pin programs fast-charge current regulation set-point, must be higher than 2 times the termination current to avoid early termination during VT1 and VT2 range"
      },
      {
        "number": "12",
        "name": "VFB",
        "type": "input",
        "description": "Output voltage analog feedback adjustment; connect output of resistive voltage divider from battery terminals to adjust output battery regulation voltage"
      },
      {
        "number": "13",
        "name": "SRN",
        "type": "bidirectional",
        "description": "Charge current-sense resistor, negative input; place 0.1-μF ceramic capacitor from SRN to SRP for differential-mode filtering and optional 0.1-μF capacitor from SRN to GND for common-mode filtering"
      },
      {
        "number": "14",
        "name": "SRP",
        "type": "bidirectional",
        "description": "Charge current-sense resistor, positive input; place 0.1-μF ceramic capacitor from SRN to SRP for differential-mode filtering and 0.1-μF capacitor from SRP to GND for common-mode filtering"
      },
      {
        "number": "15",
        "name": "ISET2",
        "type": "input",
        "description": "Precharge and termination current-set input; voltage of ISET2 pin programs precharge current regulation set-point and termination current trigger point"
      },
      {
        "number": "16",
        "name": "ACSET",
        "type": "input",
        "description": "Adapter current-set input; voltage on ACSET pin programs input current-regulation set-point during dynamic power management (DPM)"
      },
      {
        "number": "17",
        "name": "GND",
        "type": "power_in",
        "description": "Low-current sensitive analog/digital ground; connect with thermal underneath the IC on PCB layout"
      },
      {
        "number": "18",
        "name": "REGN",
        "type": "output",
        "description": "PWM low-side driver positive 6-V supply output; connect 1-μF ceramic capacitor from REGN to GND pin close to IC and small-signal Schottky diode from REGN to BTST for bootstrap voltage"
      },
      {
        "number": "19",
        "name": "LODRV",
        "type": "output",
        "description": "PWM low-side driver output; connect to gate of low-side power MOSFET with short trace"
      },
      {
        "number": "20",
        "name": "PH",
        "type": "input",
        "description": "PWM high-side driver negative supply; connect to phase-switching node (junction of low-side MOSFET drain, high-side MOSFET source, and output inductor)"
      },
      {
        "number": "21",
        "name": "HIDRV",
        "type": "output",
        "description": "PWM high-side driver output; connect to gate of high-side power MOSFET with short trace"
      },
      {
        "number": "22",
        "name": "BTST",
        "type": "power_in",
        "description": "PWM high-side driver positive supply; connect 0.1-μF bootstrap capacitor from PH to BTST and bootstrap Schottky diode from REGN to BTST"
      },
      {
        "number": "23",
        "name": "BATDRV",
        "type": "output",
        "description": "Battery-to-system MOSFET driver output; gate drive for battery-to-system load BAT PMOS power FET to isolate system from battery with asymmetrical internal gate drive and break-before-make logic with respect to ACDRV"
      },
      {
        "number": "24",
        "name": "VCC",
        "type": "power_in",
        "description": "IC power positive supply; connect through 10-Ω resistor to common-source (diode-OR) point of high-side P-channel MOSFET and reverse-blocking power P-channel MOSFET, place 1-μF ceramic capacitor from VCC to GND pin close to IC"
      },
      {
        "number": "25",
        "name": "Thermal Pad",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 25 added from the footprint"
        ],
        "pages_sent": 11,
        "cost_usd": 0.1308,
        "at": "2026-10-01T04:29:36"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/bq24616",
        "pages": 43,
        "sha256": "481c7492f39e1622",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "bq24616rget.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "bq24616rget-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4,
          4,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7fc530d1635457d74612f5e027e39b45465ca6c816237b80e32f51c01a3fffec",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "VQFN-24(4x4)",
      "Category": "Power Management (PMIC)",
      "Pins": "25"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "bq24616rget"
  ],
  "discovery_pitch": "BQ24616RGET (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "bq24616rget.kicad_sym",
    "bq24616rget.kicad_mod",
    "bq24616rget.glb",
    "bq24616rget.step",
    "bq24616rget.lbr",
    "docs/hero.png",
    "docs/bq24616rget-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "bq24616rget-etched.step",
    "bq24616rget-hero.glb",
    "bq24616rget-hero.overlay.json"
  ],
  "visibility": "public",
  "description": "Texas Instruments Battery Management, VQFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}