by adom
Murata Electronics Ferrite Beads, 0402. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
master
John Lauer
Laser mark by the planner (adom-aiflow 0.1.49): re-etched, outlines regenerated, GLB / hero / outline symbol rebuilt; l…
786773c
16d ago
{
"tool": "build_blm15.py",
"name": "BLM15AX601SN1D",
"doc": "Murata BLM15 (1005 / 0402) chip ferrite bead 3D model built from Murata's own drawing (AI-generated, 2026-10-04).\n\nMurata's 3D model for this part is only served through SnapEDA, which refused the download, so the STEP is built with\nOpenCascade (OCP) from Murata's product page for BLM15AX601SN1# (pim.murata.com, \"Appearance & Shape\" drawing\nSE0_1700): body L 1.0 +/- 0.05, W 0.5 +/- 0.05, T 0.5 +/- 0.05 mm; electrode 0.25 +/- 0.1 mm at each end, covering the\nwhole end and wrapping all four sides; edges slightly rounded in the end view. Colours are sampled from Murata's\nproduct photo (PE0_1700): ferrite body sRGB (26, 26, 26), electrodes (179, 179, 179).\n\nFrame: mm, Z up, seated on z = 0, origin at the part centre, length along X (pad 1 at -X).\nUsage: build_blm15.py OUT.step REPORT.json [--name MPN]",
"source": {
"drawing": "https://pim.murata.com/asset/pim4/ferriteBeadInductortypefilter/SE0_1700_GIF_FERRITEBEADINDUCTORTYPEFILTER",
"photo": "https://pim.murata.com/asset/pim4/ferriteBeadInductortypefilter/PE0_1700_GIF_FERRITEBEADINDUCTORTYPEFILTER",
"page": "https://www.murata.com/en-us/products/productdetail?partno=BLM15AX601SN1%23"
},
"dims_mm": {
"L": 1.0,
"W": 0.5,
"T": 0.5,
"electrode": 0.25,
"edge_round": 0.04
},
"colours_srgb": {
"body": [
26,
26,
26
],
"electrode": [
179,
179,
179
]
}
}