# BGU7007

**NXP Semicon** · RF Amplifiers · XSON-6(1x1.5)

BGU7007 from NXP Semicon, in a XSON-6(1x1.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin; pins 1 and 2 are both GND. |
| 2 | GND | power_in | Ground pin; pins 1 and 2 are both GND. |
| 3 | RF_IN | input | RF input, AC coupled through internal DC blocking capacitors; DC voltage must not exceed VCC + 0.6 V and shall not exceed 5.0 V. |
| 4 | VCC | power_in | Supply voltage of 1.5 V to 3.1 V with RF input AC coupled. |
| 5 | ENABLE | input | Enable pin: VENABLE of 0.8 V or higher switches the device ON and 0.35 V or lower switches it OFF. |
| 6 | RF_OUT | output | RF output, AC coupled through internal DC blocking capacitors; DC voltage must not exceed VCC + 0.6 V and shall not exceed 5.0 V. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | XSON-6(1x1.5) |
| Category | RF & Radio |
| Pins | 6 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 |  | 5 | V | RF input AC coupled | 3 |
| Voltage on pin ENABLE | VENABLE | -0.5 |  | 5 | V | VENABLE <VCC + 0.6 | 3 |
| Voltage on pin RF_IN | VRF_IN | -0.5 |  | 5 | V | DC; VRF_IN <VCC + 0.6 | 3 |
| Voltage on pin RF_OUT | VRF_OUT | -0.5 |  | 5 | V | DC; VRF_OUT <VCC + 0.6 | 3 |
| Input power | Pi |  |  | 0 | dBm |  | 3 |
| Total power dissipation | Ptot |  |  | 55 | mW | Tsp <= 130 C | 3 |
| Storage temperature | Tstg | -65 |  | 150 | C |  | 3 |
| Junction temperature | Tj |  |  | 150 | C |  | 3 |
| Electrostatic discharge voltage HBM | VESD |  |  | 4 | kV | Human Body Model (HBM); JEDEC 22-A114E | 3 |
| Electrostatic discharge voltage CDM | VESD |  |  | 1 | kV | Charged Device Model (CDM); JEDEC 22-C101B | 3 |
| Supply voltage | VCC | 1.5 |  | 3.1 | V | RF input AC coupled | 4 |
| Supply current | ICC | 3.4 | 4.8 | 6.1 | mA | VENABLE >= 0.8 V; Pi < 40 dBm | 4 |
| Supply current | ICC | 8.9 | 12.8 | 15.9 | mA | VENABLE >= 0.8 V; Pi = 20 dBm | 4 |
| Supply current in power-down | ICC |  |  | 1 | A | VENABLE <= 0.35 V | 4 |
| Ambient temperature | Tamb | -40 | 25 | 85 | C |  | 4 |
| Power gain | Gp | 16.5 | 18.5 | 20.5 | dB | Tamb = 25 C; Pi < 40 dBm, no jammer | 4 |
| Power gain | Gp | 17.5 | 19.5 | 21.5 | dB | Tamb = 25 C; Pi = 20 dBm, no jammer | 4 |
| Power gain | Gp | 16 |  | 21 | dB | 40 C <= Tamb <= +85 C; Pi < 40 dBm, no jammer | 4 |
| Power gain | Gp | 17 |  | 22 | dB | 40 C <= Tamb <= +85 C; Pi = 20 dBm, no jammer | 4 |
| Input return loss | RLin | 5 | 7 |  | dB | Pi < 40 dBm | 4 |
| Input return loss | RLin | 7 | 10 |  | dB | Pi = 20 dBm | 4 |
| Output return loss | RLout | 12 | 18 |  | dB | Pi < 40 dBm | 4 |
| Output return loss | RLout | 15 | 24 |  | dB | Pi = 20 dBm | 4 |
| Isolation | ISL | 22 | 24 |  | dB |  | 4 |
| Noise figure | NF |  | 0.85 | 1.2 | dB | Tamb = 25 C; Pi < 40 dBm, no jammer; PCB losses subtracted | 4 |
| Noise figure | NF |  | 0.9 | 1.3 | dB | Tamb = 25 C; Pi < 40 dBm, no jammer; including PCB losses | 4 |
| Noise figure | NF |  | 1.2 | 1.6 | dB | Tamb = 25 C; Pi = 20 dBm, no jammer | 4 |
| Noise figure | NF |  | 1.1 | 1.5 | dB | Tamb = 25 C; Pjam = 20 dBm; fjam = 850 MHz | 4 |
| Noise figure | NF |  | 1.3 | 1.7 | dB | Tamb = 25 C; Pjam = 20 dBm; fjam = 1850 MHz | 4 |
| Noise figure | NF |  |  | 1.7 | dB | 40 C <= Tamb <= +85 C; Pi < 40 dBm, no jammer | 4 |
| Noise figure | NF |  |  | 1.9 | dB | 40 C <= Tamb <= +85 C; Pi = 20 dBm, no jammer | 4 |
| Noise figure | NF |  |  | 1.8 | dB | 40 C <= Tamb <= +85 C; Pjam = 20 dBm; fjam = 850 MHz | 4 |
| Noise figure | NF |  |  | 2 | dB | 40 C <= Tamb <= +85 C; Pjam = 20 dBm; fjam = 1850 MHz | 4 |
| Input power at 1 dB gain compression | Pi(1dB) | 16 | 13 |  | dBm | f = 1559 MHz to 1610 MHz; VCC = 1.5 V | 5 |
| Input power at 1 dB gain compression | Pi(1dB) | 15 | 12 |  | dBm | f = 1559 MHz to 1610 MHz; VCC = 1.8 V | 5 |
| Input power at 1 dB gain compression | Pi(1dB) | 14 | 11 |  | dBm | f = 1559 MHz to 1610 MHz; VCC = 2.85 V | 5 |
| Input power at 1 dB gain compression | Pi(1dB) | 13 | 10 |  | dBm | f = 1612 MHz to 1909 MHz; VCC = 1.8 V; out of band | 5 |
| Input power at 1 dB gain compression | Pi(1dB) | 11 | 8 |  | dBm | f = 1612 MHz to 1909 MHz; VCC = 2.85 V; out of band | 5 |
| Input third-order intercept point | IP3i | 1 | 4 |  | dBm | f = 1.575 GHz; VCC = 1.5 V | 5 |
| Input third-order intercept point | IP3i | 2 | 5 |  | dBm | f = 1.575 GHz; VCC = 2.85 V | 5 |
| Turn-on time | ton |  |  | 2 | s | Within 10 % of the final gain | 5 |
| Turn-off time | toff |  |  | 1 | s | Within 10 % of the final gain | 5 |
| Rollett stability factor | K | 1 |  |  |  |  | 5 |
| Thermal resistance from junction to solder point | Rth(j-sp) |  | 225 |  | K/W |  | 3 |

## CAD (KiCad official)

- Symbol: `BGU7007`
- Footprint: `Package_SON:Texas_USON-6_1x1.45mm_P0.5mm_SMD`
- 3D model: XSON-6(1x1.5) (KiCad packages3D, STEP)
- 3D model files: `bgu7007-etched.step` / `bgu7007-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `bgu7007.step` / `bgu7007.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [NXP Semicon datasheet](https://www.nxp.com/docs/en/data-sheet/BGU7007.pdf) (19 pp, sha256 `d1eab7ea2457d2f7`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/bgu7007-datasheet.pdf)