BD9E100FJ-LBGE2

{
  "schema_version": 1,
  "type": "component",
  "slug": "bd9e100fj-lbge2",
  "title": "BD9E100FJ-LBGE2",
  "brief": "ROHM Semicon DC-DC Converters, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "bd9e100fj-lbge2",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "BD9E100FJ-LBGE2",
    "manufacturer": "ROHM Semicon",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8600703814060294144",
    "parts": {
      "symbol": "bd9e100fj-lbge2.kicad_sym",
      "footprint": "bd9e100fj-lbge2.kicad_mod",
      "model_3d": "bd9e100fj-lbge2-hero.glb",
      "model_3d_plain": "bd9e100fj-lbge2-etched.glb",
      "model_3d_step": "bd9e100fj-lbge2-etched.step",
      "model_3d_step_plain": "bd9e100fj-lbge2.step",
      "lbr": "bd9e100fj-lbge2.lbr"
    },
    "distributor_links": {
      "lcsc": "C3193009"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T21:19:34Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "BOOT",
        "type": "passive",
        "description": "Connect a 0.1µF bootstrap capacitor between this terminal and SW; the capacitor voltage is the gate drive voltage of the high-side MOSFET."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Power supply terminal for the switching regulator and control circuit, with a 7.0V to 36V input range; a 10µF ceramic capacitor is recommended."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Enable input: a signal of 0.8V or lower forces shutdown mode and 2.5V or higher enables the device; this terminal must be terminated."
      },
      {
        "number": "4",
        "name": "AGND",
        "type": "power_in",
        "description": "Ground terminal for the control circuit."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Inverting input node for the gm error amplifier; the output voltage setting resistance is calculated as described on page 22."
      },
      {
        "number": "6",
        "name": "COMP",
        "type": "passive",
        "description": "Input terminal for the gm error amplifier output and the output switch current comparator; a frequency phase compensation component is connected here (see page 23 for calculation)."
      },
      {
        "number": "7",
        "name": "PGND",
        "type": "power_in",
        "description": "Ground terminal for the output stage of the switching regulator."
      },
      {
        "number": "8",
        "name": "SW",
        "type": "output",
        "description": "Switch node connected to the high-side MOSFET source and low-side MOSFET drain; the 0.1µF bootstrap capacitor to BOOT and an inductor rated for DC superimposition connect here."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN given (BD9E100FJ-LBGE2) does not appear in the supplied datasheet. The ordering information ; The package in the datasheet is SOP-J8 (4.90mm x 6.00mm x 1.65mm), not the SOIC-8 hint. The pinout w; Pin types for BOOT (passive) and COMP (passive) were chosen by inference from the pin descriptions b"
        ],
        "pages_sent": 6,
        "cost_usd": 0.0277,
        "at": "2026-10-17T21:17:57"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8600703814060294144",
        "pages": 33,
        "sha256": "be41189139924dbc",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "bd9e100fj-lbge2.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "bd9e100fj-lbge2-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f78ef39a60dc22e23332393eda3dd9b605344baab433f7d2a61d0f152d362d0c",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "ROHM Semicon",
      "Package": "SOIC-8",
      "Category": "Power Management (PMIC)",
      "Pins": "8"
    },
    "appearance": {
      "contacts": {
        "quote": " Provide the input capacitor as close to the VIN terminal as possible on the same plane as the IC.  If there is any unused area on the PCB, provide a copper foil plane for the ground node to assist ",
        "page": 24,
        "doc": "ds.pdf",
        "material": "copper"
      },
      "version": 1,
      "datasheet_sha256": "be41189139924dbc686f3cf8c7e58580ecde5f1b34fb7967122783727d5c4069"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "be41189139924dbc686f3cf8c7e58580ecde5f1b34fb7967122783727d5c4069",
      "rows": [
        {
          "name": "Supply Current in Operating",
          "symbol": "IOPR",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 1.5,
          "max": 2.5,
          "conditions": "VFB = 1.1V; No switching",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Supply Current in Standby",
          "symbol": "ISTBY",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 0,
          "max": 10,
          "conditions": "VEN = 0V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Reference Voltage",
          "symbol": "VFB",
          "kind": "electrical",
          "unit": "V",
          "min": 0.98,
          "typ": 1,
          "max": 1.02,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "FB Input Current",
          "symbol": "IFB",
          "kind": "electrical",
          "unit": "µA",
          "min": -1,
          "typ": 0,
          "max": 1,
          "conditions": "VFB = 0V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Switching frequency",
          "symbol": "FOSC",
          "kind": "electrical",
          "unit": "MHz",
          "min": 0.85,
          "typ": 1,
          "max": 1.15,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Maximum Duty ratio",
          "symbol": "Maxduty",
          "kind": "electrical",
          "unit": "%",
          "min": 85,
          "typ": 90,
          "max": 95,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "UVLO detection voltage",
          "symbol": "VUVLO",
          "kind": "electrical",
          "unit": "V",
          "min": 6.1,
          "typ": 6.4,
          "max": 6.7,
          "conditions": "VIN falling",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "UVLO hysteresis voltage",
          "symbol": "VUVLOHYS",
          "kind": "electrical",
          "unit": "mV",
          "min": 100,
          "typ": 200,
          "max": 300,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "EN high-level input voltage",
          "symbol": "VENH",
          "kind": "electrical",
          "unit": "V",
          "min": 2.5,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "EN low-level input voltage",
          "symbol": "VENL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.8,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "EN Input current",
          "symbol": "IEN",
          "kind": "electrical",
          "unit": "µA",
          "min": 2.1,
          "typ": 4.2,
          "max": 8.4,
          "conditions": "VEN = 3V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Soft Start time",
          "symbol": "TSS",
          "kind": "electrical",
          "unit": "msec",
          "min": 1.5,
          "typ": 3,
          "max": 6,
          "conditions": "EN rising to FB=0.85V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Supply Voltage",
          "symbol": "VIN",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 7,
          "typ": null,
          "max": 36,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Output Current",
          "symbol": "IOUT",
          "kind": "recommended_operating",
          "unit": "A",
          "min": 0,
          "typ": null,
          "max": 1,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Output Voltage Range",
          "symbol": "VRANGE",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1,
          "typ": null,
          "max": null,
          "conditions": "Note 2: I/O voltage setting with output pulse width not 150nsec (Typ) or less",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Supply Voltage",
          "symbol": "VIN",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 40,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "EN Input Voltage",
          "symbol": "VEN",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 40,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Voltage from GND to BOOT",
          "symbol": "VBOOT",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 45,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Voltage from SW to BOOT",
          "symbol": "ΔVBOOT",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 7,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "FB Input Voltage",
          "symbol": "VFB",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 7,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "COMP Input Voltage",
          "symbol": "VCOMP",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 7,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "SW Input Voltage",
          "symbol": "VSW",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.5,
          "typ": null,
          "max": null,
          "conditions": "Max printed as VIN + 0.3",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Allowable Power Dissipation",
          "symbol": "Pd",
          "kind": "absolute_maximum",
          "unit": "W",
          "min": null,
          "typ": null,
          "max": 0.67,
          "conditions": "Mounted on 1-layer 70.0mm x 70.0mm x 1.6mm board; derate 5.36 mW/°C for Ta≥25°C",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Operating Junction Temperature Range",
          "symbol": "Tj",
          "kind": "absolute_maximum",
          "unit": "C",
          "min": -40,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Storage Temperature Range",
          "symbol": "Tstg",
          "kind": "absolute_maximum",
          "unit": "C",
          "min": -55,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Thermal resistance junction-to-ambient",
          "symbol": "θJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 185.2,
          "max": null,
          "conditions": "1 layer board, back side copper foil 70mm x 70mm",
          "source_page": 25,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "bd9e100fj-lbge2"
  ],
  "discovery_pitch": "BD9E100FJ-LBGE2 (ROHM Semicon) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "bd9e100fj-lbge2.kicad_sym",
    "bd9e100fj-lbge2.kicad_mod",
    "bd9e100fj-lbge2.glb",
    "bd9e100fj-lbge2.step",
    "bd9e100fj-lbge2.lbr",
    "docs/hero.png",
    "docs/bd9e100fj-lbge2-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "bd9e100fj-lbge2-hero.glb",
    "bd9e100fj-lbge2-hero.overlay.json",
    "bd9e100fj-lbge2-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}