component
BD82006FVJ-MGE2
Public Made by Adomby adom
ROHM Semicon Power Distribution Switches, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownBD82006FVJ-MGE2
ROHM Semicon · Power Distribution Switches · MSOP-8
BD82006FVJ-MGE2 from ROHM Semicon, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin for the IC. |
| 2 | IN | power_in | Switch input and supply voltage for the IC, operating range 2.7 V to 5.5 V; connect pins 2 and 3 together. |
| 3 | IN | power_in | Switch input and supply voltage for the IC, operating range 2.7 V to 5.5 V; connect pins 2 and 3 together. |
| 4 | EN | input | Active-high enable input for this BD82006FVJ-M variant: a high level above 2.0 V turns the switch on and a low level below 0.8 V turns it off. |
| 5 | /OC | output | Open-drain fault flag output that goes low during over-current or over-temperature; sink current is limited to 5 mA absolute maximum and it should be pulled up with 10 kΩ to 100 kΩ. |
| 6 | OUT | power_out | Power switch output (MOSFET source); connect pins 6, 7 and 8 together; absolute maximum VOUT is -0.3 to +6.0 V. |
| 7 | OUT | power_out | Power switch output (MOSFET source); connect pins 6, 7 and 8 together; absolute maximum VOUT is -0.3 to +6.0 V. |
| 8 | OUT | power_out | Power switch output (MOSFET source); connect pins 6, 7 and 8 together; absolute maximum VOUT is -0.3 to +6.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ROHM Semicon |
| Package | MSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Current | IDD | 110 | 160 | μA | VEN = 5V , OUT=OPEN | 3 | |
| Standby Current | ISTB | 0.01 | 1 | μA | VEN = 0V , OUT=OPEN | 3 | |
| EN Input Voltage High Input | VENH | 2 | V | High Input | 3 | ||
| EN Input Voltage Low Input | VENL | 0.8 | V | Low Input | 3 | ||
| EN Input Current | IEN | -1 | 0.01 | 1 | μA | VEN = 0V or VEN = 5V | 3 |
| /OC Output Low Voltage | V/OCL | 0.5 | V | I/OC = 0.5mA | 3 | ||
| /OC Output Leak Current | IL/OC | 0.01 | 1 | μA | V/OC = 5V | 3 | |
| /OC Delay Time | t/OC | 10 | 15 | 20 | ms | 3 | |
| ON-Resistance | RON | 70 | 110 | mΩ | IOUT = 500mA | 3 | |
| Switch Leak Current | ILSW | 1 | μA | VEN = 0V, VOUT = 0V | 3 | ||
| Reverse Leak Current | ILREV | 1 | μA | VOUT = 5.5V, VIN = 0V | 3 | ||
| Current Limit Threshold | ITH | 1.5 | 2.4 | 3 | A | 3 | |
| Short Circuit Current | ISC | 1.1 | 1.5 | 2.1 | A | VOUT = 0V; CL = 47μF (RMS) | 3 |
| Output Rise Time | tON1 | 0.8 | 10 | ms | RL = 10Ω | 3 | |
| Output Turn ON Time | tON2 | 1.1 | 20 | ms | RL = 10Ω | 3 | |
| Output Fall Time | tOFF1 | 5 | 20 | μs | RL = 10Ω | 3 | |
| Output Turn OFF Time | tOFF2 | 10 | 40 | μs | RL = 10Ω | 3 | |
| UVLO Threshold Increasing | VTUVH | 2.1 | 2.3 | 2.5 | V | VIN Increasing | 3 |
| UVLO Threshold Decreasing | VTUVL | 2 | 2.2 | 2.4 | V | VIN Decreasing | 3 |
| Operating Voltage | VIN | 2.7 | 5.5 | V | 3 | ||
| Operating Temperature | Topr | -40 | 85 | °C | 3 | ||
| Supply Voltage | VIN | -0.3 | 6 | V | 3 | ||
| Enable Input Voltage | VEN, V/EN | -0.3 | 6 | V | 3 | ||
| /OC Voltage | V/OC | -0.3 | 6 | V | 3 | ||
| /OC Sink Current | I/OC | 5 | mA | 3 | |||
| OUT Voltage | VOUT | -0.3 | 6 | V | 3 | ||
| Storage Temperature | Tstg | -55 | 150 | °C | 3 | ||
| Power Dissipation | Pd | 0.58 | W | Mounted on 70mm x 70mm x 1.6mm glass epoxy board. Reduce 4.7mW/°C above Ta=25°C | 3 |
CAD (KiCad official)
- Symbol:
BD82006FVJ-MGE2 - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
bd82006fvj-mge2-etched.step/bd82006fvj-mge2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bd82006fvj-mge2.step/bd82006fvj-mge2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ROHM Semicon datasheet (26 pp, sha256
ad68789985e93121, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).