component
BD63005AMUV-E2
Public Made by Adomby adom
ROHM Semicon Motor Driver ICs, TQFN-40-EP(6x6). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
BD63005AMUV-E2
ROHM Semicon · Motor Driver ICs · TQFN-40-EP(6x6)
BD63005AMUV-E2 from ROHM Semicon, in a TQFN-40-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RCL | input | Detect voltage input for over current. |
| 2 | RNF | passive | Detect resistor for over current; RNF maximum apply voltage is 0.7 V. |
| 3 | RNF | passive | Detect resistor for over current; RNF maximum apply voltage is 0.7 V. |
| 4 | RNF | passive | Detect resistor for over current; RNF maximum apply voltage is 0.7 V. |
| 5 | RNF | passive | Detect resistor for over current; RNF maximum apply voltage is 0.7 V. |
| 6 | NC | unconnected | Listed as NC (no connection) in the pin description table. |
| 7 | V | power_in | V phase motor driver output. |
| 8 | V | power_in | V phase motor driver output. |
| 9 | NC | unconnected | Listed as NC (no connection) in the pin description table. |
| 10 | PGND | power_in | Power ground for the output driver stage. |
| 11 | W | output | W phase motor driver output. |
| 12 | W | output | W phase motor driver output. |
| 13 | NC | unconnected | Listed as NC (no connection) in the pin description table. |
| 14 | VREG | power_out | Regulator output, turned OFF at stand-by. |
| 15 | HUP | input | U phase Hall sensor input (+). |
| 16 | HUN | input | U phase Hall sensor input (-). |
| 17 | HVP | input | V phase Hall sensor input (+). |
| 18 | HVN | input | V phase Hall sensor input (-). |
| 19 | HWP | input | W phase Hall sensor input (+). |
| 20 | HWN | input | W phase Hall sensor input (-). |
| 21 | GND | power_in | Ground. |
| 22 | CP1 | passive | Charge pump setting 1. |
| 23 | CP2 | passive | Charge pump setting 2. |
| 24 | VG | power_out | Charge pump output; VG voltage rating is -0.3 to +38.0 V. |
| 25 | VCC | power_in | Power supply; VCC rating is -0.3 to +33.0 V absolute maximum, 10 to 28 V recommended (24 V typical). |
| 26 | VCC | power_in | Power supply; VCC rating is -0.3 to +33.0 V absolute maximum, 10 to 28 V recommended (24 V typical). |
| 27 | VCC | power_in | Power supply; VCC rating is -0.3 to +33.0 V absolute maximum, 10 to 28 V recommended (24 V typical). |
| 28 | VCC | power_in | Power supply; VCC rating is -0.3 to +33.0 V absolute maximum, 10 to 28 V recommended (24 V typical). |
| 29 | LPE | input | Setting for motor lock protection (H/M/L input). |
| 30 | BRKB | input | Brake input (negative logic). |
| 31 | PWMB | input | PWM input (negative logic). |
| 32 | CW | input | CW/CCW input (H: CW, L: CCW). |
| 33 | FGO | output | FG output (1FG or 3FG); FGO terminal voltage limit is -0.3 to +7.0 V and output current limit is 5 mA. |
| 34 | ENB | input | Enable input (negative logic). |
| 35 | FGSW | input | 1FG/3FG switching (H: 3FG, L: 1FG). |
| 36 | CLNMT | input | Current limit mask time setting (H/M/L input). |
| 37 | NC | unconnected | Listed as NC (no connection) in the pin description table. |
| 38 | U | output | U phase motor driver output. |
| 39 | U | output | U phase motor driver output. |
| 40 | NC | unconnected | Listed as NC (no connection) in the pin description table. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ROHM Semicon |
| Package | TQFN-40-EP(6x6) |
| Category | Power Management ICs |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VCC | -0.3 | 33 | V | 4 | ||
| VG Voltage | VG | -0.3 | 38 | V | 4 | ||
| Control Input Voltage | VIN,VIN2 | -0.3 | 5.5 | V | 4 | ||
| FGO Terminal Voltage | VFGO | -0.3 | 7 | V | 4 | ||
| RNF Maximum Apply Voltage | VRNF | 0.7 | V | 4 | |||
| VREG Output Current | IVREG | -30 | mA | Note 1: do not exceed Tj=150°C | 4 | ||
| FGO Output Current | IFGO | 5 | mA | Note 1: do not exceed Tj=150°C | 4 | ||
| Driver Output Current (continuous) | IOUT(DC) | 2 | A/Phase | Note 1: do not exceed Tj=150°C | 4 | ||
| Driver Output Current (peak) | IOUT(PEAK) | 3.5 | A/Phase | Note 2: pulse width tw≤1ms, duty=20% pulse | 4 | ||
| Operating Temperature Range | TOPR | -25 | 85 | °C | 4 | ||
| Storage Temperature Range | TSTG | -55 | 150 | °C | 4 | ||
| Junction Temperature | Tjmax | 150 | °C | 4 | |||
| Supply Voltage | VCC | 10 | 24 | 28 | V | 4 | |
| Circuit Current | ICC | 4.4 | 8.4 | mA | VENB=0V | 11 | |
| Stand-by Current | ISTBY | 1.1 | 1.7 | mA | ENB=OPEN | 11 | |
| VREG Voltage | VREG | 4.5 | 5 | 5.5 | V | IVREG=-10mA | 11 |
| Output On Resistance | RON | 0.17 | 0.27 | Ω | IOUT=±1.5A(Upper + Lower) | 11 | |
| Input Bias Current | IHALL | -2 | -0.1 | 2 | µA | VHALL=0V | 11 |
| Range of In-phase Input Voltage1 | VHALLCM1 | 0 | V | 11 | |||
| Range of In-phase Input Voltage2 | VHALLCM2 | 0 | V | When one hall Input is bias | 11 | ||
| Minimum Input Voltage | VHALLMIN | 50 | mVp-p | 11 | |||
| HYS Level + | VHALLHY+ | 5 | 15 | 25 | mV | 11 | |
| HYS Level - | VHALLHY- | -25 | -15 | -5 | mV | 11 | |
| Input Current (ENB) | IENB | -75 | -45 | -25 | µA | VENB=0V | 11 |
| Standby Voltage | VSTBY | 2 | V | 11 | |||
| Enable Voltage | VENA | 0 | 0.8 | V | 11 | ||
| Input Current (PWMB, CW, BRKB, FGSW) | IIN | -80 | -50 | -30 | µA | VIN=0V | 11 |
| Voltage Input H | VINH | 2 | V | 11 | |||
| Voltage Input L | VINL | 0 | 0.8 | V | 11 | ||
| Minimum Input Pulse Width | tPLSMIN | 1 | msec | CW, BRKB | 11 | ||
| Input Current (LPE, CLNMT) | IIN2 | -80 | -50 | -30 | µA | VIN2=0V | 11 |
| Input Voltage L (LPE, CLNMT) | VINL2 | 0 | V | 11 | |||
| Output Voltage L | VFGOL | 0 | 0.1 | 0.3 | V | IFGO=2mA | 11 |
| Detect Voltage | VCL | 0.18 | 0.2 | 0.22 | V | 11 | |
| UVLO Release Voltage | VUVH | 6.5 | 7 | 7.5 | V | 11 | |
| UVLO Lockout Voltage | VUVL | 5.5 | 6 | 6.5 | V | 11 | |
| OVLO Release Voltage1 | VOVL1 | 14 | 15 | 16 | V | LPE="M" | 11 |
| OVLO Lockout Voltage1 | VOVH1 | 15 | 16 | 17 | V | LPE="M" | 11 |
| OVLO Release Voltage2 | VOVL2 | 29 | 30.5 | 32 | V | LPE="H" or "L" | 11 |
| OVLO Lockout Voltage2 | VOVH2 | 29.5 | 31 | 32.5 | V | LPE="H" or "L" | 11 |
CAD (KiCad official)
- Symbol:
BD63005AMUV-E2 - Footprint:
Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm - 3D model: TQFN-40-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
bd63005amuv-e2-etched.step/bd63005amuv-e2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bd63005amuv-e2.step/bd63005amuv-e2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ROHM Semicon datasheet (23 pp, sha256
5aa659cd7fd2ab32, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# BD63005AMUV-E2
**ROHM Semicon** · Motor Driver ICs · TQFN-40-EP(6x6)
BD63005AMUV-E2 from ROHM Semicon, in a TQFN-40-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RCL | input | Detect voltage input for over current. |
| 2 | RNF | passive | Detect resistor for over current; RNF maximum apply voltage is 0.7 V. |
| 3 | RNF | passive | Detect resistor for over current; RNF maximum apply voltage is 0.7 V. |
| 4 | RNF | passive | Detect resistor for over current; RNF maximum apply voltage is 0.7 V. |
| 5 | RNF | passive | Detect resistor for over current; RNF maximum apply voltage is 0.7 V. |
| 6 | NC | unconnected | Listed as NC (no connection) in the pin description table. |
| 7 | V | power_in | V phase motor driver output. |
| 8 | V | power_in | V phase motor driver output. |
| 9 | NC | unconnected | Listed as NC (no connection) in the pin description table. |
| 10 | PGND | power_in | Power ground for the output driver stage. |
| 11 | W | output | W phase motor driver output. |
| 12 | W | output | W phase motor driver output. |
| 13 | NC | unconnected | Listed as NC (no connection) in the pin description table. |
| 14 | VREG | power_out | Regulator output, turned OFF at stand-by. |
| 15 | HUP | input | U phase Hall sensor input (+). |
| 16 | HUN | input | U phase Hall sensor input (-). |
| 17 | HVP | input | V phase Hall sensor input (+). |
| 18 | HVN | input | V phase Hall sensor input (-). |
| 19 | HWP | input | W phase Hall sensor input (+). |
| 20 | HWN | input | W phase Hall sensor input (-). |
| 21 | GND | power_in | Ground. |
| 22 | CP1 | passive | Charge pump setting 1. |
| 23 | CP2 | passive | Charge pump setting 2. |
| 24 | VG | power_out | Charge pump output; VG voltage rating is -0.3 to +38.0 V. |
| 25 | VCC | power_in | Power supply; VCC rating is -0.3 to +33.0 V absolute maximum, 10 to 28 V recommended (24 V typical). |
| 26 | VCC | power_in | Power supply; VCC rating is -0.3 to +33.0 V absolute maximum, 10 to 28 V recommended (24 V typical). |
| 27 | VCC | power_in | Power supply; VCC rating is -0.3 to +33.0 V absolute maximum, 10 to 28 V recommended (24 V typical). |
| 28 | VCC | power_in | Power supply; VCC rating is -0.3 to +33.0 V absolute maximum, 10 to 28 V recommended (24 V typical). |
| 29 | LPE | input | Setting for motor lock protection (H/M/L input). |
| 30 | BRKB | input | Brake input (negative logic). |
| 31 | PWMB | input | PWM input (negative logic). |
| 32 | CW | input | CW/CCW input (H: CW, L: CCW). |
| 33 | FGO | output | FG output (1FG or 3FG); FGO terminal voltage limit is -0.3 to +7.0 V and output current limit is 5 mA. |
| 34 | ENB | input | Enable input (negative logic). |
| 35 | FGSW | input | 1FG/3FG switching (H: 3FG, L: 1FG). |
| 36 | CLNMT | input | Current limit mask time setting (H/M/L input). |
| 37 | NC | unconnected | Listed as NC (no connection) in the pin description table. |
| 38 | U | output | U phase motor driver output. |
| 39 | U | output | U phase motor driver output. |
| 40 | NC | unconnected | Listed as NC (no connection) in the pin description table. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ROHM Semicon |
| Package | TQFN-40-EP(6x6) |
| Category | Power Management ICs |
| Pins | 41 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VCC | -0.3 | | 33 | V | | 4 |
| VG Voltage | VG | -0.3 | | 38 | V | | 4 |
| Control Input Voltage | VIN,VIN2 | -0.3 | | 5.5 | V | | 4 |
| FGO Terminal Voltage | VFGO | -0.3 | | 7 | V | | 4 |
| RNF Maximum Apply Voltage | VRNF | | | 0.7 | V | | 4 |
| VREG Output Current | IVREG | -30 | | | mA | Note 1: do not exceed Tj=150°C | 4 |
| FGO Output Current | IFGO | | | 5 | mA | Note 1: do not exceed Tj=150°C | 4 |
| Driver Output Current (continuous) | IOUT(DC) | | | 2 | A/Phase | Note 1: do not exceed Tj=150°C | 4 |
| Driver Output Current (peak) | IOUT(PEAK) | | | 3.5 | A/Phase | Note 2: pulse width tw≤1ms, duty=20% pulse | 4 |
| Operating Temperature Range | TOPR | -25 | | 85 | °C | | 4 |
| Storage Temperature Range | TSTG | -55 | | 150 | °C | | 4 |
| Junction Temperature | Tjmax | | | 150 | °C | | 4 |
| Supply Voltage | VCC | 10 | 24 | 28 | V | | 4 |
| Circuit Current | ICC | | 4.4 | 8.4 | mA | VENB=0V | 11 |
| Stand-by Current | ISTBY | | 1.1 | 1.7 | mA | ENB=OPEN | 11 |
| VREG Voltage | VREG | 4.5 | 5 | 5.5 | V | IVREG=-10mA | 11 |
| Output On Resistance | RON | | 0.17 | 0.27 | Ω | IOUT=±1.5A(Upper + Lower) | 11 |
| Input Bias Current | IHALL | -2 | -0.1 | 2 | µA | VHALL=0V | 11 |
| Range of In-phase Input Voltage1 | VHALLCM1 | 0 | | | V | | 11 |
| Range of In-phase Input Voltage2 | VHALLCM2 | 0 | | | V | When one hall Input is bias | 11 |
| Minimum Input Voltage | VHALLMIN | 50 | | | mVp-p | | 11 |
| HYS Level + | VHALLHY+ | 5 | 15 | 25 | mV | | 11 |
| HYS Level - | VHALLHY- | -25 | -15 | -5 | mV | | 11 |
| Input Current (ENB) | IENB | -75 | -45 | -25 | µA | VENB=0V | 11 |
| Standby Voltage | VSTBY | 2 | | | V | | 11 |
| Enable Voltage | VENA | 0 | | 0.8 | V | | 11 |
| Input Current (PWMB, CW, BRKB, FGSW) | IIN | -80 | -50 | -30 | µA | VIN=0V | 11 |
| Voltage Input H | VINH | 2 | | | V | | 11 |
| Voltage Input L | VINL | 0 | | 0.8 | V | | 11 |
| Minimum Input Pulse Width | tPLSMIN | 1 | | | msec | CW, BRKB | 11 |
| Input Current (LPE, CLNMT) | IIN2 | -80 | -50 | -30 | µA | VIN2=0V | 11 |
| Input Voltage L (LPE, CLNMT) | VINL2 | 0 | | | V | | 11 |
| Output Voltage L | VFGOL | 0 | 0.1 | 0.3 | V | IFGO=2mA | 11 |
| Detect Voltage | VCL | 0.18 | 0.2 | 0.22 | V | | 11 |
| UVLO Release Voltage | VUVH | 6.5 | 7 | 7.5 | V | | 11 |
| UVLO Lockout Voltage | VUVL | 5.5 | 6 | 6.5 | V | | 11 |
| OVLO Release Voltage1 | VOVL1 | 14 | 15 | 16 | V | LPE="M" | 11 |
| OVLO Lockout Voltage1 | VOVH1 | 15 | 16 | 17 | V | LPE="M" | 11 |
| OVLO Release Voltage2 | VOVL2 | 29 | 30.5 | 32 | V | LPE="H" or "L" | 11 |
| OVLO Lockout Voltage2 | VOVH2 | 29.5 | 31 | 32.5 | V | LPE="H" or "L" | 11 |
## CAD (KiCad official)
- Symbol: `BD63005AMUV-E2`
- Footprint: `Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm`
- 3D model: TQFN-40-EP(6x6) (KiCad packages3D, STEP)
- 3D model files: `bd63005amuv-e2-etched.step` / `bd63005amuv-e2-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `bd63005amuv-e2.step` / `bd63005amuv-e2.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ROHM Semicon datasheet](docs/bd63005amuv-e2-datasheet.pdf) (23 pp, sha256 `5aa659cd7fd2ab32`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/bd63005amuv-e2-datasheet.pdf)