BD63005AMUV-E2 from ROHM Semicon, in a TQFN-40-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	RCL	input	Detect voltage input for over current.
2	RNF	passive	Detect resistor for over current; RNF maximum apply voltage is 0.7 V.
3	RNF	passive	Detect resistor for over current; RNF maximum apply voltage is 0.7 V.
4	RNF	passive	Detect resistor for over current; RNF maximum apply voltage is 0.7 V.
5	RNF	passive	Detect resistor for over current; RNF maximum apply voltage is 0.7 V.
6	NC	unconnected	Listed as NC (no connection) in the pin description table.
7	V	power_in	V phase motor driver output.
8	V	power_in	V phase motor driver output.
9	NC	unconnected	Listed as NC (no connection) in the pin description table.
10	PGND	power_in	Power ground for the output driver stage.
11	W	output	W phase motor driver output.
12	W	output	W phase motor driver output.
13	NC	unconnected	Listed as NC (no connection) in the pin description table.
14	VREG	power_out	Regulator output, turned OFF at stand-by.
15	HUP	input	U phase Hall sensor input (+).
16	HUN	input	U phase Hall sensor input (-).
17	HVP	input	V phase Hall sensor input (+).
18	HVN	input	V phase Hall sensor input (-).
19	HWP	input	W phase Hall sensor input (+).
20	HWN	input	W phase Hall sensor input (-).
21	GND	power_in	Ground.
22	CP1	passive	Charge pump setting 1.
23	CP2	passive	Charge pump setting 2.
24	VG	power_out	Charge pump output; VG voltage rating is -0.3 to +38.0 V.
25	VCC	power_in	Power supply; VCC rating is -0.3 to +33.0 V absolute maximum, 10 to 28 V recommended (24 V typical).
26	VCC	power_in	Power supply; VCC rating is -0.3 to +33.0 V absolute maximum, 10 to 28 V recommended (24 V typical).
27	VCC	power_in	Power supply; VCC rating is -0.3 to +33.0 V absolute maximum, 10 to 28 V recommended (24 V typical).
28	VCC	power_in	Power supply; VCC rating is -0.3 to +33.0 V absolute maximum, 10 to 28 V recommended (24 V typical).
29	LPE	input	Setting for motor lock protection (H/M/L input).
30	BRKB	input	Brake input (negative logic).
31	PWMB	input	PWM input (negative logic).
32	CW	input	CW/CCW input (H: CW, L: CCW).
33	FGO	output	FG output (1FG or 3FG); FGO terminal voltage limit is -0.3 to +7.0 V and output current limit is 5 mA.
34	ENB	input	Enable input (negative logic).
35	FGSW	input	1FG/3FG switching (H: 3FG, L: 1FG).
36	CLNMT	input	Current limit mask time setting (H/M/L input).
37	NC	unconnected	Listed as NC (no connection) in the pin description table.
38	U	output	U phase motor driver output.
39	U	output	U phase motor driver output.
40	NC	unconnected	Listed as NC (no connection) in the pin description table.
41	EP	passive	Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter	Value
Manufacturer	ROHM Semicon
Package	TQFN-40-EP(6x6)
Category	Power Management ICs
Pins	41

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Power Supply Voltage	VCC	-0.3		33	V		4
VG Voltage	VG	-0.3		38	V		4
Control Input Voltage	VIN,VIN2	-0.3		5.5	V		4
FGO Terminal Voltage	VFGO	-0.3		7	V		4
RNF Maximum Apply Voltage	VRNF			0.7	V		4
VREG Output Current	IVREG	-30			mA	Note 1: do not exceed Tj=150°C	4
FGO Output Current	IFGO			5	mA	Note 1: do not exceed Tj=150°C	4
Driver Output Current (continuous)	IOUT(DC)			2	A/Phase	Note 1: do not exceed Tj=150°C	4
Driver Output Current (peak)	IOUT(PEAK)			3.5	A/Phase	Note 2: pulse width tw≤1ms, duty=20% pulse	4
Operating Temperature Range	TOPR	-25		85	°C		4
Storage Temperature Range	TSTG	-55		150	°C		4
Junction Temperature	Tjmax			150	°C		4
Supply Voltage	VCC	10	24	28	V		4
Circuit Current	ICC		4.4	8.4	mA	VENB=0V	11
Stand-by Current	ISTBY		1.1	1.7	mA	ENB=OPEN	11
VREG Voltage	VREG	4.5	5	5.5	V	IVREG=-10mA	11
Output On Resistance	RON		0.17	0.27	Ω	IOUT=±1.5A(Upper + Lower)	11
Input Bias Current	IHALL	-2	-0.1	2	µA	VHALL=0V	11
Range of In-phase Input Voltage1	VHALLCM1	0			V		11
Range of In-phase Input Voltage2	VHALLCM2	0			V	When one hall Input is bias	11
Minimum Input Voltage	VHALLMIN	50			mVp-p		11
HYS Level +	VHALLHY+	5	15	25	mV		11
HYS Level -	VHALLHY-	-25	-15	-5	mV		11
Input Current (ENB)	IENB	-75	-45	-25	µA	VENB=0V	11
Standby Voltage	VSTBY	2			V		11
Enable Voltage	VENA	0		0.8	V		11
Input Current (PWMB, CW, BRKB, FGSW)	IIN	-80	-50	-30	µA	VIN=0V	11
Voltage Input H	VINH	2			V		11
Voltage Input L	VINL	0		0.8	V		11
Minimum Input Pulse Width	tPLSMIN	1			msec	CW, BRKB	11
Input Current (LPE, CLNMT)	IIN2	-80	-50	-30	µA	VIN2=0V	11
Input Voltage L (LPE, CLNMT)	VINL2	0			V		11
Output Voltage L	VFGOL	0	0.1	0.3	V	IFGO=2mA	11
Detect Voltage	VCL	0.18	0.2	0.22	V		11
UVLO Release Voltage	VUVH	6.5	7	7.5	V		11
UVLO Lockout Voltage	VUVL	5.5	6	6.5	V		11
OVLO Release Voltage1	VOVL1	14	15	16	V	LPE="M"	11
OVLO Lockout Voltage1	VOVH1	15	16	17	V	LPE="M"	11
OVLO Release Voltage2	VOVL2	29	30.5	32	V	LPE="H" or "L"	11
OVLO Lockout Voltage2	VOVH2	29.5	31	32.5	V	LPE="H" or "L"	11

CAD (KiCad official)

Symbol: BD63005AMUV-E2
Footprint: Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm
3D model: TQFN-40-EP(6x6) (KiCad packages3D, STEP)
3D model files: bd63005amuv-e2-etched.step / bd63005amuv-e2-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); bd63005amuv-e2.step / bd63005amuv-e2.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: ROHM Semicon datasheet (23 pp, sha256 5aa659cd7fd2ab32, retrieved 2026-10-31, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

BD63005AMUV-E2

Verified BD63005AMUV-E2

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README