BD62210AEFV-E2

{
  "schema_version": 1,
  "type": "component",
  "slug": "bd62210aefv-e2",
  "title": "BD62210AEFV-E2",
  "brief": "ROHM Semicon Motor Driver ICs, HTSSOP-28-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management ics",
    "bd62210aefv-e2",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "BD62210AEFV-E2",
    "manufacturer": "ROHM Semicon",
    "package": "HTSSOP-28-EP",
    "pin_count": 29,
    "category": "Power Management ICs",
    "subcategory": "Motor Driver ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/370a29d15ef969557cfa4b9217817183.pdf",
    "parts": {
      "symbol": "bd62210aefv-e2.kicad_sym",
      "footprint": "bd62210aefv-e2.kicad_mod",
      "model_3d": "bd62210aefv-e2-hero.glb",
      "model_3d_plain": "bd62210aefv-e2-etched.glb",
      "model_3d_step": "bd62210aefv-e2-etched.step",
      "model_3d_step_plain": "bd62210aefv-e2.step",
      "lbr": "bd62210aefv-e2.lbr"
    },
    "distributor_links": {
      "lcsc": "C2150502",
      "digikey": "BD62210AEFV-E2TR-ND",
      "mouser": "755-BD62210AEFV-E2"
    },
    "distributor_check": {
      "checked_at": "2026-10-31T00:03:08Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "BD62210AEFV-E2TR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "755-BD62210AEFV-E2",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground terminal; no pin may be at a voltage below this ground pin at any time, even during transient conditions."
      },
      {
        "number": "2",
        "name": "OUT1B",
        "type": "output",
        "description": "H-bridge output terminal for channel 1 (OUT1B); it carries motor drive current, so the trace should be thick, short and low impedance."
      },
      {
        "number": "3",
        "name": "RNF1",
        "type": "passive",
        "description": "Connection terminal of the output current detection resistor for channel 1; use a 0.1Ω to 0.3Ω resistor to GND and keep RNF below the 0.7 V maximum."
      },
      {
        "number": "4",
        "name": "RNF1S",
        "type": "input",
        "description": "Input terminal of the channel 1 current limit comparator; connect it to RNF1 when using PWM constant current control."
      },
      {
        "number": "5",
        "name": "OUT1A",
        "type": "output",
        "description": "H-bridge output terminal for channel 1 (OUT1A); it carries motor drive current, so the trace should be thick, short and low impedance."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; electrically unconnected to the internal circuit."
      },
      {
        "number": "7",
        "name": "VCC1",
        "type": "power_in",
        "description": "Power supply terminal; VCC1 and VCC2 must be shorted externally, with a recommended supply of 8 to 28 V and an absolute maximum of 36 V."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; electrically unconnected to the internal circuit."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Ground terminal; connect with low impedance so that it stays at the lowest potential in all operating states."
      },
      {
        "number": "10",
        "name": "CR",
        "type": "passive",
        "description": "Connection terminal of the CR network that sets the switching frequency; connect an external C of 330pF to 680pF and R of 10kΩ to 150kΩ between CR and GND."
      },
      {
        "number": "11",
        "name": "VREF1",
        "type": "input",
        "description": "Current limit value setting terminal for channel 1; the VREF input range is 0 to 2.0 V and it must not be left open."
      },
      {
        "number": "12",
        "name": "VREF2",
        "type": "input",
        "description": "Current limit value setting terminal for channel 2; the VREF input range is 0 to 2.0 V and it must not be left open."
      },
      {
        "number": "13",
        "name": "PS",
        "type": "input",
        "description": "Power save terminal; L puts the IC in standby with the motor outputs open, H is active, and there is a delay of 40 µs max when returning from OFF to normal."
      },
      {
        "number": "14",
        "name": "TEST1",
        "type": "passive",
        "description": "Test terminal used at distribution test; it must be connected to GND."
      },
      {
        "number": "15",
        "name": "FAILA",
        "type": "output",
        "description": "Open-drain fault output that goes low on over-current protection or thermal shutdown; use a 5kΩ to 100kΩ pull-up to a supply below 7 V, or connect to GND if unused."
      },
      {
        "number": "16",
        "name": "IN1A",
        "type": "input",
        "description": "H-bridge control input for channel 1 that sets the output logic; the H level input is 2.0 V min and the L level input is 0.8 V max."
      },
      {
        "number": "17",
        "name": "IN1B",
        "type": "input",
        "description": "H-bridge control input for channel 1 that sets the output logic; the H level input is 2.0 V min and the L level input is 0.8 V max."
      },
      {
        "number": "18",
        "name": "TEST2",
        "type": "passive",
        "description": "Test terminal used at distribution test; it must be connected to GND."
      },
      {
        "number": "19",
        "name": "IN2A",
        "type": "input",
        "description": "H-bridge control input for channel 2 that sets the output logic; the H level input is 2.0 V min and the L level input is 0.8 V max."
      },
      {
        "number": "20",
        "name": "IN2B",
        "type": "input",
        "description": "H-bridge control input for channel 2 that sets the output logic; the H level input is 2.0 V min and the L level input is 0.8 V max."
      },
      {
        "number": "21",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; electrically unconnected to the internal circuit."
      },
      {
        "number": "22",
        "name": "VCC2",
        "type": "power_in",
        "description": "Power supply terminal; VCC1 and VCC2 must be shorted externally, with a recommended supply of 8 to 28 V and an absolute maximum of 36 V."
      },
      {
        "number": "23",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; electrically unconnected to the internal circuit."
      },
      {
        "number": "24",
        "name": "OUT2A",
        "type": "output",
        "description": "H-bridge output terminal for channel 2 (OUT2A); it carries motor drive current, so the trace should be thick, short and low impedance."
      },
      {
        "number": "25",
        "name": "RNF2S",
        "type": "input",
        "description": "Input terminal of the channel 2 current limit comparator; connect it to RNF2 when using PWM constant current control."
      },
      {
        "number": "26",
        "name": "RNF2",
        "type": "passive",
        "description": "Connection terminal of the output current detection resistor for channel 2; use a 0.1Ω to 0.3Ω resistor to GND and keep RNF below the 0.7 V maximum."
      },
      {
        "number": "27",
        "name": "OUT2B",
        "type": "output",
        "description": "H-bridge output terminal for channel 2 (OUT2B); it carries motor drive current, so the trace should be thick, short and low impedance."
      },
      {
        "number": "28",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; electrically unconnected to the internal circuit."
      },
      {
        "number": "29",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package hint says HTSSOP-28-EP, but the datasheet names the package HTSSOP-B28 (28 pins with exposed; The exposed back metal pad is not numbered in the datasheet and is not listed as a pin. Per the note; Descriptions cite limits taken from other pages, not page 2: the 0.1–0.3Ω RNF range and 0.7 V maximu",
          "exposed pad 29 added from the footprint"
        ],
        "pages_sent": 11,
        "cost_usd": 0.0738,
        "at": "2026-10-31T00:02:54"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/370a29d15ef969557cfa4b9217817183.pdf",
        "pages": 24,
        "sha256": "d5a279f9242e4c6a",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 29,
        "described": 29,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "bd62210aefv-e2.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.2,
          9.7,
          1.05
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "ff242f1d3be9d09e7f929707a2c5b1ee974a4f882053b04bcdb1cd2cb21223ef",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "bd62210aefv-e2-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.2,
          9.7,
          1.05
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "c675e98bc265b3fc85d524a85b8617dde544a3a1b5f1d2981954c636b63b3b6b",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "ROHM Semicon",
      "Package": "HTSSOP-28-EP",
      "Category": "Power Management ICs",
      "Pins": "29"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "d5a279f9242e4c6a1bd9deaa344b903e5ee3e67a676f214d784ac259db06d18e",
      "rows": [
        {
          "name": "Supply Voltage",
          "symbol": "VCC1,2",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 8,
          "typ": null,
          "max": 28,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Maximum Output Current (Continuous)",
          "symbol": "IOUT",
          "kind": "recommended_operating",
          "unit": "A/ch",
          "min": null,
          "typ": null,
          "max": 0.7,
          "conditions": "Note 5: do not exceed Pd, ASO and Tjmax=150°C",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Supply Voltage",
          "symbol": "VCC1,2",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.2,
          "typ": null,
          "max": 36,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Input Voltage for Control Pin",
          "symbol": "VIN",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.2,
          "typ": null,
          "max": 5.5,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "RNF Maximum Voltage",
          "symbol": "VRNF",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.7,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Output Current",
          "symbol": "IOUT",
          "kind": "absolute_maximum",
          "unit": "A/ch",
          "min": null,
          "typ": null,
          "max": 1,
          "conditions": "Note 3: do not exceed Pd, ASO and Tjmax=150°C",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Output Current (peak)",
          "symbol": "IOUTPEAK",
          "kind": "absolute_maximum",
          "unit": "A/ch",
          "min": null,
          "typ": null,
          "max": 1.5,
          "conditions": "Note 4: pulse width tw ≤1ms, duty 20ms",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Power Dissipation",
          "symbol": "Pd",
          "kind": "absolute_maximum",
          "unit": "W",
          "min": null,
          "typ": null,
          "max": 1.45,
          "conditions": "Note 1: 70mm×70mm×1.6mm glass epoxy board; derate 11.6mW/°C above Ta=25°C",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Power Dissipation",
          "symbol": "Pd",
          "kind": "absolute_maximum",
          "unit": "W",
          "min": null,
          "typ": null,
          "max": 4.7,
          "conditions": "Note 2: 4-layer recommended board; derate 37.6mW/°C above Ta=25°C",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Operating Temperature Range",
          "symbol": "Topr",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -25,
          "typ": null,
          "max": 85,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Storage Temperature Range",
          "symbol": "Tstg",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -55,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Circuit Current at Standby",
          "symbol": "ICCST",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 10,
          "conditions": "PS=L",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Circuit Current",
          "symbol": "ICC",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 2.5,
          "max": 5,
          "conditions": "PS=H, VREFx=2V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "H Level Input Voltage",
          "symbol": "VIN2H",
          "kind": "electrical",
          "unit": "V",
          "min": 2,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "L Level Input Voltage",
          "symbol": "VIN2L",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.8,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "H Level Input Current",
          "symbol": "IIN2H",
          "kind": "electrical",
          "unit": "µA",
          "min": 35,
          "typ": 50,
          "max": 100,
          "conditions": "VIN2=5V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "L Level Input Current",
          "symbol": "IIN2L",
          "kind": "electrical",
          "unit": "µA",
          "min": -10,
          "typ": 0,
          "max": null,
          "conditions": "VIN2=0V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Output ON-Resistance",
          "symbol": "RON",
          "kind": "electrical",
          "unit": "Ω",
          "min": null,
          "typ": 1.9,
          "max": 2.5,
          "conditions": "IOUT =±1.0A (Sum of upper and lower)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Output Leak Current",
          "symbol": "ILEAK",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 10,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "RNFX Input Current",
          "symbol": "IRNF",
          "kind": "electrical",
          "unit": "µA",
          "min": -80,
          "typ": -40,
          "max": null,
          "conditions": "RNFx=0V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "VREFx Input Current",
          "symbol": "IVREF",
          "kind": "electrical",
          "unit": "µA",
          "min": -2,
          "typ": -0.1,
          "max": null,
          "conditions": "VREFx=0V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "VREFx Input Voltage Range",
          "symbol": "VVREF",
          "kind": "electrical",
          "unit": "V",
          "min": 0,
          "typ": null,
          "max": 2,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Minimum on Time (Blank Time)",
          "symbol": "tONMIN",
          "kind": "electrical",
          "unit": "µs",
          "min": 0.7,
          "typ": 1.5,
          "max": 3,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Current Limit Comparator Threshold",
          "symbol": "VCTH",
          "kind": "electrical",
          "unit": "V",
          "min": 0.23,
          "typ": 0.25,
          "max": 0.27,
          "conditions": "VREFx=2V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Thermal Resistance Junction-to-Ambient (Board 1)",
          "symbol": "θja",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 86.2,
          "max": null,
          "conditions": "Board ①: 1-layer board (copper foil on back 0mm)",
          "source_page": 18,
          "source": "datasheet"
        },
        {
          "name": "Thermal Resistance Junction-to-Ambient (Board 2)",
          "symbol": "θja",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 67.6,
          "max": null,
          "conditions": "Board ②: 2-layer board (copper foil on back 15mm*15mm)",
          "source_page": 18,
          "source": "datasheet"
        },
        {
          "name": "Thermal Resistance Junction-to-Ambient (Board 3)",
          "symbol": "θja",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 37.9,
          "max": null,
          "conditions": "Board ③: 2-layer board (copper foil on back 70mm*70mm)",
          "source_page": 18,
          "source": "datasheet"
        },
        {
          "name": "Thermal Resistance Junction-to-Ambient (Board 4)",
          "symbol": "θja",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 26.6,
          "max": null,
          "conditions": "Board ④: 4-layer board (copper foil on back 70mm*70mm)",
          "source_page": 18,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "bd62210aefv-e2"
  ],
  "discovery_pitch": "BD62210AEFV-E2 (ROHM Semicon) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "bd62210aefv-e2.kicad_sym",
    "bd62210aefv-e2.kicad_mod",
    "bd62210aefv-e2.glb",
    "bd62210aefv-e2.step",
    "bd62210aefv-e2.lbr",
    "docs/hero.png",
    "docs/bd62210aefv-e2-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "bd62210aefv-e2-hero.glb",
    "bd62210aefv-e2-hero.overlay.json",
    "bd62210aefv-e2-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}