JST B2B-PH-K-S — 2-pin, 2.0 mm pitch, through-hole top-entry PH-series board header (the board-side mate for the PHR-2 wire housing). KiCad symbol + footprint + 3D ready to drop in. Datasheet links to JST; run the chip-fetcher skill to fetch JST's own manufacturer 3D model for the most accurate board render.
Regenerate with adom-lbr 2.32.0: pad 2 was drawn as an EAGLE long pad 3.5 x 1.75 mm elongated along the wrong axis, so its copper ended 0.35 mm inside pad 1, a short between pin 1 and pin 2. Both pads are now 1.2 x 2.4 mm along their own long axis and clear each other by 0.8 mm.
Regenerate .lbr with adom-lbr 2.31.0. Since the 2.24.0 pass these pages gained: rounded and oval pad corners that were importing square (EAGLE roundness), pin names hidden on glyph symbols so they stop printing over the drawing, group captions using EAGLE's real alignment vocabulary, >NAME and >VALUE kept out of the pin/wire lanes, and KiCad user-layer geometry preserved. Verified with lint and validate.
Regenerate with adom-lbr 2.25.0: pin names no longer print on top of the symbol's own drawing. EAGLE places a pin name at its inner end, which on a two-terminal or four-terminal glyph part lands inside the artwork; the pad number is shown and the name hidden, as EAGLE's own passive libraries do.