component
JST B2B-PH-K-S (PH 2.0mm board header)
Public Made by Adomby adom
JST B2B-PH-K-S — 2-pin, 2.0 mm pitch, through-hole top-entry PH-series board header (the board-side mate for the PHR-2 wire housing). KiCad symbol + footprint + 3D ready to drop in. Datasheet links to JST; run the chip-fetcher skill to fetch JST's own manufacturer 3D model for the most accurate board render.
← Commit history
Regenerate with adom-lbr 2.32.0: pad 2 was drawn as an EAGLE long pad 3.5 x 1.75 mm elongated along the wrong axis, so its copper ended 0.35 mm inside pad 1, a short between pin 1 and pin 2. Both pads are now 1.2 x 2.4 mm along their own long axis and clear each other by 0.8 mm.
1 file changed
+2−2
B2B-PH-K-S.lbr+2−2@@ -54,8 +54,8 @@ <packages> <package name="JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical"> <description>JST, 2.00 mm pitch. JST PH series connector, B2B-PH-K</description>- <pad name="1" x="0.0000" y="-0.0000" drill="0.7500" diameter="1.2000" shape="round"/>- <pad name="2" x="2.0000" y="-0.0000" drill="0.7500" diameter="1.7500" shape="long"/>+ <pad name="1" x="0.0000" y="-0.0000" drill="0.7500" diameter="1.2000" shape="long" rot="R90"/>+ <pad name="2" x="2.0000" y="-0.0000" drill="0.7500" diameter="1.2000" shape="long" rot="R90"/> <wire x1="-2.0600" y1="1.8100" x2="4.0600" y2="1.8100" width="0.1200" layer="21"/> <wire x1="4.0600" y1="1.8100" x2="4.0600" y2="-2.9100" width="0.1200" layer="21"/> <wire x1="4.0600" y1="-2.9100" x2="-2.0600" y2="-2.9100" width="0.1200" layer="21"/>