# AZ432ANTR-TP

**TECH PUBLIC** · Voltage Reference · SOT-23

AZ432ANTR-TP from TECH PUBLIC, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | input | Reference input pin. Internal error amplifier compares this pin against the internal 1.25 V bandgap; the cathode sinks current to regulate REF to Vref. Typical reference input current 0.4 uA (max 1.0 uA); reference input current range up to 1 uA absolute maximum. |
| 2 | K | power_in | Cathode pin. Shunt regulator current-sink terminal; VKA absolute maximum 18 V, continuous cathode current up to 100 mA, minimum cathode current for regulation ~30 uA (typ). Dynamic impedance ~0.15 Ω typ at IK = 0.1 mA to 20 mA. |
| 3 | A | power_in | Anode pin. Ground/return terminal for the shunt regulator; all voltage values in the datasheet are referenced to this pin. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | TECH PUBLIC |
| Package | SOT-23 |
| Category | PMIC |
| Pins | 3 |

## Ordering variants

- `AZ432ANTR-TP`

## CAD (KiCad official)

- Symbol: `AZ432ANTR-TP`
- Footprint: `Package_TO_SOT_SMD:SOT-23`
- 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files: `az432antr-tp-etched.step` / `az432antr-tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `az432antr-tp.step` / `az432antr-tp.glb` are the bare package body.

## 3D model downloads

Two STEP files. Same geometry, different body top:

| File | Size | Use it when |
|---|---|---|
| [`az432antr-tp.step`](az432antr-tp.step) | 59 KB | You want the bare part, or you mark your own boards. |
| [`az432antr-tp-etched.step`](az432antr-tp-etched.step) | 1.6 MB | You want the part with `AZ432ANTR-TP` already on it. |

The marking in the etched file is real recessed geometry cut into the solid, not a
texture or a decal: 419 faces against 69 in the bare model. It
survives export, section views, and rendering in any CAD tool, and it drops straight
into KiCad or Fusion with no extra setup.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [TECH PUBLIC datasheet](docs/az432antr-tp-datasheet.pdf) (4 pp, sha256 `a2359883533014ff`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/az432antr-tp-datasheet.pdf)