AT45DB021E-SSHN-B

{
  "slug": "at45db021e-sshn-b",
  "version": "0.1.0",
  "type": "component",
  "description": "Adesto Technologies Pre-ordered Chips, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "at45db021e-sshn-b",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "at45db021e-sshn-b.kicad_sym",
    "at45db021e-sshn-b.kicad_mod",
    "at45db021e-sshn-b.glb",
    "at45db021e-sshn-b.step",
    "at45db021e-sshn-b.lbr",
    "docs/hero.png",
    "docs/at45db021e-sshn-b-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "at45db021e-sshn-b-hero.glb",
    "at45db021e-sshn-b-hero.overlay.json",
    "at45db021e-sshn-b-etched.glb"
  ],
  "component": {
    "mpn": "AT45DB021E-SSHN-B",
    "manufacturer": "Adesto Technologies",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/d13bee7c9720cc722d112e1dc79cd85f.pdf",
    "parts": {
      "symbol": "at45db021e-sshn-b.kicad_sym",
      "footprint": "at45db021e-sshn-b.kicad_mod",
      "model_3d": "at45db021e-sshn-b-hero.glb",
      "model_3d_plain": "at45db021e-sshn-b-etched.glb",
      "model_3d_step": "at45db021e-sshn-b-etched.step",
      "model_3d_step_plain": "at45db021e-sshn-b.step",
      "lbr": "at45db021e-sshn-b.lbr"
    },
    "distributor_links": {
      "lcsc": "C1348792"
    },
    "distributor_check": {
      "checked_at": "2026-10-27T07:32:30Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SI",
        "type": "input",
        "description": "Serial Input: shifts in all command, address and data bits, latched on the rising edge of SCK and ignored when the device is deselected (CS high)."
      },
      {
        "number": "2",
        "name": "SCK",
        "type": "input",
        "description": "Serial Clock: controls data flow, with input latched on the rising edge and SO output clocked out on the falling edge of SCK."
      },
      {
        "number": "3",
        "name": "RESET",
        "type": "input",
        "description": "Active-low reset: a low level terminates the operation in progress and resets the internal state machine to idle; drive high externally if unused (internal power-on reset, no power-on restrictions)."
      },
      {
        "number": "4",
        "name": "CS",
        "type": "input",
        "description": "Active-low Chip Select: asserting selects the device, a high-to-low transition starts an operation, and when deasserted the device is deselected (standby) and SO is high-impedance."
      },
      {
        "number": "5",
        "name": "WP",
        "type": "input",
        "description": "Active-low Write Protect: when asserted, sectors specified in the Sector Protection Register are protected against program and erase; internally pulled high, may be left floating if unused but recommended to be tied to VCC."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_in",
        "description": "Device power supply (1.65V to 3.6V); operation at invalid VCC voltages may produce spurious results."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the power supply, to be connected to system ground."
      },
      {
        "number": "8",
        "name": "SO",
        "type": "output",
        "description": "Serial Output: shifts data out on the falling edge of SCK and is high-impedance whenever the device is deselected (CS high)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 14,
        "cost_usd": 0.112,
        "at": "2026-10-27T07:32:17"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/d13bee7c9720cc722d112e1dc79cd85f.pdf",
        "pages": 68,
        "sha256": "db6fabc37825965c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "at45db021e-sshn-b.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "at45db021e-sshn-b-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ca1e5a4bd5fd17f15341d1d7d53873ce66a40c70779ae44794cd450e7c1e7813",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}