AT24C08D-PUM

{
  "slug": "at24c08d-pum",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Pre-ordered Chips, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "at24c08d-pum",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "at24c08d-pum.kicad_sym",
    "at24c08d-pum.kicad_mod",
    "at24c08d-pum.glb",
    "at24c08d-pum.step",
    "at24c08d-pum.lbr",
    "docs/hero.png",
    "docs/at24c08d-pum-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "at24c08d-pum-hero.glb",
    "at24c08d-pum-hero.overlay.json",
    "at24c08d-pum-etched.glb"
  ],
  "component": {
    "mpn": "AT24C08D-PUM",
    "manufacturer": "Microchip Tech",
    "package": "PDIP-8",
    "pin_count": 8,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/281a96e9e146b31e67b5042913a16039.pdf",
    "parts": {
      "symbol": "at24c08d-pum.kicad_sym",
      "footprint": "at24c08d-pum.kicad_mod",
      "model_3d": "at24c08d-pum-hero.glb",
      "model_3d_plain": "at24c08d-pum-etched.glb",
      "model_3d_step": "at24c08d-pum-etched.step",
      "model_3d_step_plain": "at24c08d-pum.step",
      "lbr": "at24c08d-pum.lbr"
    },
    "distributor_links": {
      "lcsc": "C1349885",
      "digikey": "AT24C08D-PUM-ND",
      "mouser": "556-AT24C08D-PUM"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T15:56:59Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "AT24C08D-PUM-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "556-AT24C08D-PUM",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "No Connect pin, not internally connected to the device."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "No Connect pin, not internally connected to the device."
      },
      {
        "number": "3",
        "name": "A2",
        "type": "input",
        "description": "Hard-wired device address input to GND or VCC; if left floating it is internally pulled down to GND, and any pull-up resistor should be 10 kΩ or less."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the power supply, to be connected to the system ground."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Open-drain bidirectional serial data pin that must be pulled high through an external pull-up resistor not exceeding 10 kΩ."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "Serial clock input: SDA data is latched on the rising edge of SCL and clocked out on the falling edge, and SCL must be forced or pulled high when the bus is idle."
      },
      {
        "number": "7",
        "name": "WP",
        "type": "input",
        "description": "Write-protect input: connected to GND allows normal writes, connected to VCC inhibits writes to the full array; any pull-up resistor should be 10 kΩ or less."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Device power supply pin; operation at invalid VCC voltages may produce spurious results and should not be attempted."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 21,
        "cost_usd": 0.0163,
        "at": "2026-10-28T15:56:21"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/281a96e9e146b31e67b5042913a16039.pdf",
        "pages": 43,
        "sha256": "c3ecea028fa4c47d",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "at24c08d-pum.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "at24c08d-pum-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07cc8115cf1bf57ea6e23684c7185528d24725649b5a83fa172a7c3538fd9445",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}