component
AT24C08D-PUM
Public Made by Adomby adom
Microchip Tech Pre-ordered Chips, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 7d ago |
| viewers | 7d ago |
| at24c08d-pum-etched.glb | 7d ago |
| at24c08d-pum-etched.step | 7d ago |
| at24c08d-pum-hero.glb | 7d ago |
| at24c08d-pum-hero.overlay.json | 7d ago |
| at24c08d-pum.glb | 7d ago |
| at24c08d-pum.kicad_mod | 7d ago |
| at24c08d-pum.kicad_sym | 7d ago |
| at24c08d-pum.lbr | 7d ago |
| at24c08d-pum.step | 7d ago |
| package.json | 7d ago |
| page.json | 7d ago |
| README.md | 7d ago |
AT24C08D-PUM
Microchip Tech · Pre-ordered Chips · PDIP-8
AT24C08D-PUM from Microchip Tech, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No Connect pin, not internally connected to the device. |
| 2 | NC | unconnected | No Connect pin, not internally connected to the device. |
| 3 | A2 | input | Hard-wired device address input to GND or VCC; if left floating it is internally pulled down to GND, and any pull-up resistor should be 10 kΩ or less. |
| 4 | GND | power_in | Ground reference for the power supply, to be connected to the system ground. |
| 5 | SDA | bidirectional | Open-drain bidirectional serial data pin that must be pulled high through an external pull-up resistor not exceeding 10 kΩ. |
| 6 | SCL | input | Serial clock input: SDA data is latched on the rising edge of SCL and clocked out on the falling edge, and SCL must be forced or pulled high when the bus is idle. |
| 7 | WP | input | Write-protect input: connected to GND allows normal writes, connected to VCC inhibits writes to the full array; any pull-up resistor should be 10 kΩ or less. |
| 8 | VCC | power_in | Device power supply pin; operation at invalid VCC voltages may produce spurious results and should not be attempted. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | PDIP-8 |
| Category | Interface ICs |
| Pins | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] © 2020 Microchip Technology Inc. | 26 |
CAD (KiCad official)
- Symbol:
AT24C08D-PUM - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
at24c08d-pum-etched.step/at24c08d-pum-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);at24c08d-pum.step/at24c08d-pum.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (43 pp, sha256
c3ecea028fa4c47d, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).