# AS393P-E1

**Diodes Incorporated** · Comparators · PDIP-8

AS393P-E1 from Diodes Incorporated, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTPUT1 | output | Open-collector output of comparator 1, with a saturation voltage of 200 mV typical and 400 mV maximum at 4 mA sink, and a minimum output sink current of 6.0 mA. |
| 2 | INPUT1- | input | Inverting input of comparator 1; the input common-mode voltage must not go below ground by more than 0.3 V at +25°C, and the input may be taken to +36 V without damage. |
| 3 | INPUT1+ | input | Non-inverting input of comparator 1; the input common-mode range is 0 V to VCC-1.5 V at VCC = 30 V, and the input may be taken to +36 V without damage. |
| 4 | GND | power_in | Ground reference (0 V) for the device, the reference for the input common-mode voltage range. |
| 5 | INPUT2+ | input | Non-inverting input of comparator 2; the input common-mode range is 0 V to VCC-1.5 V at VCC = 30 V, and the input may be taken to +36 V without damage. |
| 6 | INPUT2- | input | Inverting input of comparator 2; the input common-mode voltage must not go below ground by more than 0.3 V at +25°C, and the input may be taken to +36 V without damage. |
| 7 | OUTPUT2 | output | Open-collector output of comparator 2, with a saturation voltage of 200 mV typical and 400 mV maximum at 4 mA sink, and a minimum output sink current of 6.0 mA. |
| 8 | VCC | power_in | Positive supply: 2 V to 36 V for single supply, or ±1.0 V to ±18 V for dual supplies. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | PDIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (recommended) | VCC | 2 |  | 36 | V |  | 2 |
| Operating Temperature Range | TA | -40 |  | 85 | °C |  | 2 |
| Supply Voltage (absolute maximum) | VCC |  |  | 40 | V |  | 2 |
| Differential Input Voltage | VID |  |  | 40 | V |  | 2 |
| Input Voltage | VIN | -0.3 |  | 40 | V |  | 2 |
| Input Current | IIN |  |  | 50 | mA | VIN < -0.3V | 2 |
| Power Dissipation (PDIP-8) | PD |  |  | 780 | mW | TA = +25°C | 2 |
| Operating Junction Temperature | TJ |  |  | 150 | °C |  | 2 |
| Storage Temperature | TSTG | -65 |  | 150 | °C |  | 2 |
| Lead Temperature (soldering) | TLEAD |  |  | 260 | °C | Soldering, 10 seconds | 2 |
| Input Offset Voltage (AS393, 25°C) | VIO |  | 1 | 5 | mV | VO = 1.4V, RS = 0Ω, VCC = 5V to 30V | 3 |
| Input Offset Voltage (AS393, over temperature) | VIO |  |  | 7 | mV | VO = 1.4V, RS = 0Ω, VCC = 5V to 30V; TA = -40°C to +85°C per Note 6 | 3 |
| Input Bias Current (25°C) | IIN+ / IIN- |  | 25 | 250 | nA | IIN+ or IIN- with output in linear range, VCM = 0V | 3 |
| Input Bias Current (over temperature) | IIN+ / IIN- |  |  | 400 | nA | IIN+ or IIN- with output in linear range, VCM = 0V; TA = -40°C to +85°C per Note 6 | 3 |
| Input Offset Current (25°C) | IIN+-IIN- |  | 5 | 50 | nA | IIN+-IIN-, VCM = 0V | 3 |
| Input Offset Current (over temperature) | IIN+-IIN- |  |  | 200 | nA | IIN+-IIN-, VCM = 0V; TA = -40°C to +85°C per Note 6 | 3 |
| Input Common Mode Voltage Range | VICM | 0 |  |  | V | VCC = 30V | 3 |
| Supply Current (25°C, VCC = 5V) | ICC |  | 0.4 | 1 | mA | RL = ∞, VCC = 5V | 3 |
| Supply Current (over temperature, VCC = 5V) | ICC |  |  | 2 | mA | RL = ∞, VCC = 5V; TA = -40°C to +85°C per Note 6 | 3 |
| Supply Current (25°C, VCC = 30V) | ICC |  | 0.7 | 1.7 | mA | RL = ∞, VCC = 30V | 3 |
| Supply Current (over temperature, VCC = 30V) | ICC |  |  | 3 | mA | RL = ∞, VCC = 30V; TA = -40°C to +85°C per Note 6 | 3 |
| Voltage Gain | AV | 50 | 200 |  | V/mV | VCC = 15V, RL ≥ 15kΩ, VO = 1V to 11V | 3 |
| Output Sink Current | IO | 6 | 16 |  | mA | VIN- = 1V, VIN+ = 0V, VO = 1.5V | 3 |
| Output Leakage Current | IOL |  |  | 1 | µA | VIN- = 0V, VIN+ = 1V, VO = 30V | 3 |
| Saturation Voltage (25°C) | VSAT |  | 200 | 400 | mV | VIN- = 1V, VIN+ = 0, ISINK ≤ 4mA | 3 |
| Saturation Voltage (over temperature) | VSAT |  |  | 500 | mV | VIN- = 1V, VIN+ = 0, ISINK ≤ 4mA; TA = -40°C to +85°C per Note 6 | 3 |

## Materials and finish

As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).

| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts |  | tin | • Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 • Weight: | 13 |

## CAD (KiCad official)

- Symbol: `AS393P-E1`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files: `as393p-e1-etched.step` / `as393p-e1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `as393p-e1.step` / `as393p-e1.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Diodes Incorporated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8560098212876357632) (14 pp, sha256 `4612b4ecc06e13cb`, retrieved 2026-11-12, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/as393p-e1-datasheet.pdf)