component
AS393P-E1
Public Made by Adomby adom
Diodes Incorporated Comparators, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.1
4 files changed
+330−325
README.md+28−28@@ -8,14 +8,14 @@ AS393P-E1 from Diodes Incorporated, in a PDIP-8. Pinout and pin descriptions ext | Pin | Name | Type | Function | |---|---|---|---|-| 1 | OUTPUT1 | output | Open-collector output of comparator 1, with 200mV typical saturation voltage at 4mA sink and 6.0mA minimum output sink current. |-| 2 | INPUT1- | input | Inverting input of comparator 1, with common-mode range from 0V to VCC-1.5V and differential input up to 40V. |-| 3 | INPUT1+ | input | Non-inverting input of comparator 1, with common-mode range from 0V to VCC-1.5V and differential input up to 40V. |-| 4 | GND | power_in | Ground reference (0V) for the device, or negative supply in split-supply operation. |-| 5 | INPUT2+ | input | Non-inverting input of comparator 2, with common-mode range from 0V to VCC-1.5V and differential input up to 40V. |-| 6 | INPUT2- | input | Inverting input of comparator 2, with common-mode range from 0V to VCC-1.5V and differential input up to 40V. |-| 7 | OUTPUT2 | output | Open-collector output of comparator 2, with 200mV typical saturation voltage at 4mA sink and 6.0mA minimum output sink current. |-| 8 | VCC | power_in | Positive supply, recommended 2V to 36V single supply with absolute maximum of 40V. |+| 1 | OUTPUT1 | output | Open-collector output of comparator 1, with a saturation voltage of 200 mV typical and 400 mV maximum at 4 mA sink, and a minimum output sink current of 6.0 mA. |+| 2 | INPUT1- | input | Inverting input of comparator 1; the input common-mode voltage must not go below ground by more than 0.3 V at +25°C, and the input may be taken to +36 V without damage. |+| 3 | INPUT1+ | input | Non-inverting input of comparator 1; the input common-mode range is 0 V to VCC-1.5 V at VCC = 30 V, and the input may be taken to +36 V without damage. |+| 4 | GND | power_in | Ground reference (0 V) for the device, the reference for the input common-mode voltage range. |+| 5 | INPUT2+ | input | Non-inverting input of comparator 2; the input common-mode range is 0 V to VCC-1.5 V at VCC = 30 V, and the input may be taken to +36 V without damage. |+| 6 | INPUT2- | input | Inverting input of comparator 2; the input common-mode voltage must not go below ground by more than 0.3 V at +25°C, and the input may be taken to +36 V without damage. |+| 7 | OUTPUT2 | output | Open-collector output of comparator 2, with a saturation voltage of 200 mV typical and 400 mV maximum at 4 mA sink, and a minimum output sink current of 6.0 mA. |+| 8 | VCC | power_in | Positive supply: 2 V to 36 V for single supply, or ±1.0 V to ±18 V for dual supplies. | ## Key specifications @@ -32,32 +32,32 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply Voltage | VCC | 2 | | 36 | V | | 2 |+| Supply Voltage (recommended) | VCC | 2 | | 36 | V | | 2 | | Operating Temperature Range | TA | -40 | | 85 | °C | | 2 |-| Supply Voltage | VCC | | | 40 | V | | 2 |+| Supply Voltage (absolute maximum) | VCC | | | 40 | V | | 2 | | Differential Input Voltage | VID | | | 40 | V | | 2 | | Input Voltage | VIN | -0.3 | | 40 | V | | 2 | | Input Current | IIN | | | 50 | mA | VIN < -0.3V | 2 | | Power Dissipation (PDIP-8) | PD | | | 780 | mW | TA = +25°C | 2 | | Operating Junction Temperature | TJ | | | 150 | °C | | 2 | | Storage Temperature | TSTG | -65 | | 150 | °C | | 2 |-| Lead Temperature (Soldering) | TLEAD | | | 260 | °C | Soldering, 10 seconds | 2 |-| Input Offset Voltage (AS393) | | | 1 | 5 | mV | VO = 1.4V, RS = 0Ω, VCC = 5V to 30V | 3 |-| Input Offset Voltage (AS393, over temperature) | | | | 7 | mV | VO = 1.4V, RS = 0Ω, VCC = 5V to 30V | 3 |-| Input Bias Current | | | 25 | 250 | nA | IIN+ or IIN- with output in linear range, VCM = 0V | 3 |-| Input Bias Current (over temperature) | | | | 400 | nA | IIN+ or IIN- with output in linear range, VCM = 0V | 3 |-| Input Offset Current | | | 5 | 50 | nA | IIN+-IIN-, VCM = 0V | 3 |-| Input Offset Current (over temperature) | | | | 200 | nA | IIN+-IIN-, VCM = 0V | 3 |-| Input Common Mode Voltage Range | | 0 | | | V | VCC = 30V | 3 |-| Supply Current | | | 0.4 | 1 | mA | RL = ∞, VCC = 5V | 3 |-| Supply Current (over temperature) | | | | 2 | mA | RL = ∞, VCC = 5V | 3 |-| Supply Current | | | 0.7 | 1.7 | mA | RL = ∞, VCC = 30V | 3 |-| Supply Current (over temperature) | | | | 3 | mA | RL = ∞, VCC = 30V | 3 |-| Voltage Gain | | 50 | 200 | | V/mV | VCC = 15V, RL ≥ 15kΩ, VO = 1V to 11V | 3 |-| Output Sink Current | | 6 | 16 | | mA | VIN- = 1V, VIN+ = 0V, VO = 1.5V | 3 |-| Output Leakage Current | | | | 1 | µA | VIN- = 0V, VIN+ = 1V, VO = 30V | 3 |-| Saturation Voltage | | | 200 | 400 | mV | VIN- = 1V, VIN+ = 0, ISINK ≤ 4mA | 3 |-| Saturation Voltage (over temperature) | | | | 500 | mV | VIN- = 1V, VIN+ = 0, ISINK ≤ 4mA | 3 |+| Lead Temperature (soldering) | TLEAD | | | 260 | °C | Soldering, 10 seconds | 2 |+| Input Offset Voltage (AS393, 25°C) | VIO | | 1 | 5 | mV | VO = 1.4V, RS = 0Ω, VCC = 5V to 30V | 3 |+| Input Offset Voltage (AS393, over temperature) | VIO | | | 7 | mV | VO = 1.4V, RS = 0Ω, VCC = 5V to 30V; TA = -40°C to +85°C per Note 6 | 3 |+| Input Bias Current (25°C) | IIN+ / IIN- | | 25 | 250 | nA | IIN+ or IIN- with output in linear range, VCM = 0V | 3 |+| Input Bias Current (over temperature) | IIN+ / IIN- | | | 400 | nA | IIN+ or IIN- with output in linear range, VCM = 0V; TA = -40°C to +85°C per Note 6 | 3 |+| Input Offset Current (25°C) | IIN+-IIN- | | 5 | 50 | nA | IIN+-IIN-, VCM = 0V | 3 |+| Input Offset Current (over temperature) | IIN+-IIN- | | | 200 | nA | IIN+-IIN-, VCM = 0V; TA = -40°C to +85°C per Note 6 | 3 |+| Input Common Mode Voltage Range | VICM | 0 | | | V | VCC = 30V | 3 |+| Supply Current (25°C, VCC = 5V) | ICC | | 0.4 | 1 | mA | RL = ∞, VCC = 5V | 3 |+| Supply Current (over temperature, VCC = 5V) | ICC | | | 2 | mA | RL = ∞, VCC = 5V; TA = -40°C to +85°C per Note 6 | 3 |+| Supply Current (25°C, VCC = 30V) | ICC | | 0.7 | 1.7 | mA | RL = ∞, VCC = 30V | 3 |+| Supply Current (over temperature, VCC = 30V) | ICC | | | 3 | mA | RL = ∞, VCC = 30V; TA = -40°C to +85°C per Note 6 | 3 |+| Voltage Gain | AV | 50 | 200 | | V/mV | VCC = 15V, RL ≥ 15kΩ, VO = 1V to 11V | 3 |+| Output Sink Current | IO | 6 | 16 | | mA | VIN- = 1V, VIN+ = 0V, VO = 1.5V | 3 |+| Output Leakage Current | IOL | | | 1 | µA | VIN- = 0V, VIN+ = 1V, VO = 30V | 3 |+| Saturation Voltage (25°C) | VSAT | | 200 | 400 | mV | VIN- = 1V, VIN+ = 0, ISINK ≤ 4mA | 3 |+| Saturation Voltage (over temperature) | VSAT | | | 500 | mV | VIN- = 1V, VIN+ = 0, ISINK ≤ 4mA; TA = -40°C to +85°C per Note 6 | 3 | ## Materials and finish @@ -79,7 +79,7 @@ As the datasheet states them (page.json `metadata.appearance`; the 3D model's co Data extracted from the manufacturer datasheet, not a distributor listing: - **Datasheet:** [Diodes Incorporated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8560098212876357632) (14 pp, sha256 `4612b4ecc06e13cb`, retrieved 2026-11-12, tier: lcsc)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). [Datasheet PDF](docs/as393p-e1-datasheet.pdf)
as393p-e1-hero.overlay.json+265−260@@ -1,265 +1,270 @@ {- "spec": "adom-hero 1.4",- "mpn": "AS393P-E1",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {- "pad_outlines": {- "material": "Footprint pads - teal dashed outlines - 50 percent opacity",- "rgba": [- 0.0,- 0.902,- 0.863,- 0.5- ],- "pads": 8,- "span_mm": 9.22,- "dash_mm": 0.2305,- "gap_mm": 0.1383,- "pad_stroke_mm": 0.0553- },- "silkscreen": {- "material": "Silkscreen reference lines - 30 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.3- ],- "footprint_items": 6,- "pin1": {- "source": "added dot (AI)",- "pad": "1",- "center_mm": [- 0.0,- -1.35- ],- "r_mm": 0.35- }- },- "signal_names": {- "material": "Signal names - 50 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.5- ],- "font": "DejaVu Sans Mono",- "labels": 8,- "sides": "top + mirrored underside (single-sided)",- "fallback_to_pad_number": 0- }+ "spec": "adom-hero 1.4",+ "mpn": "AS393P-E1",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 8,+ "span_mm": 9.22,+ "dash_mm": 0.2305,+ "gap_mm": 0.1383,+ "pad_stroke_mm": 0.0553 },- "align": {- "ok": true,- "centre_offset_mm": 0.0,- "tolerance_mm": 0.738,- "orientation_flipped": false,- "contacts_bbox_mm": [- -0.127,- 7.747,- -7.734,- 0.114+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 6,+ "pin1": {+ "source": "added dot (AI)",+ "pad": "1",+ "center_mm": [+ 0.0,+ -1.35 ],- "pads_bbox_mm": [- -0.8,- 8.42,- -8.42,- 0.8- ],- "seating_z_mm": -3.3- },- "sources": {- "glb": "as393p-e1-etched.glb",- "glb_sha256": "7241ee8cfe9a6ac33619616ab35983728f107c62be34f7c46fe6811452999f3d",- "footprint": "as393p-e1.kicad_mod",- "footprint_sha256": "222fb44370968119abbd978176814cc43a71bc32ac2de275d8a3c418c0830fc6",- "pins": "page.json component.pins",- "pins_sha256": "e3a6a6b430ed1c7c8ecb10b3c5b3172c7bbaf435ec2eaf7b937dd992c6b11931"+ "r_mm": 0.35+ } },- "generator": "adom-wiki 1.8.22 (component_hero)",- "labels": [- {- "pad": "1",- "text": "OUTPUT1",- "x": -0.95,- "y": 0.0,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "2",- "text": "INPUT1-",- "x": -0.95,- "y": 2.54,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "3",- "text": "INPUT1+",- "x": -0.95,- "y": 5.08,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "4",- "text": "GND",- "x": -0.95,- "y": 7.62,- "align": "right",- "vertical": false,- "h": 0.6- },- {- "pad": "5",- "text": "INPUT2+",- "x": 8.57,- "y": 7.62,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "6",- "text": "INPUT2-",- "x": 8.57,- "y": 5.08,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "7",- "text": "OUTPUT2",- "x": 8.57,- "y": 2.54,- "align": "left",- "vertical": false,- "h": 0.6- },- {- "pad": "8",- "text": "VCC",- "x": 8.57,- "y": 0.0,- "align": "left",- "vertical": false,- "h": 0.6- }+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "omitted": null,+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "board_underside": false,+ "electrical_pads_without_contact": [],+ "mounting_pads_left_out": [],+ "centre_offset_mm": 0.0,+ "over_pads": true,+ "tolerance_mm": 0.738,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -0.127,+ 7.747,+ -7.734,+ 0.114+ ],+ "pads_bbox_mm": [+ -0.8,+ 8.42,+ -8.42,+ 0.8 ],- "pads": [- {- "number": "1",- "shape": "roundrect",- "center_mm": [- 0.0,- 0.0- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "2",- "shape": "circle",- "center_mm": [- 0.0,- 2.54- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "3",- "shape": "circle",- "center_mm": [- 0.0,- 5.08- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "4",- "shape": "circle",- "center_mm": [- 0.0,- 7.62- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "5",- "shape": "circle",- "center_mm": [- 7.62,- 7.62- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "6",- "shape": "circle",- "center_mm": [- 7.62,- 5.08- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "7",- "shape": "circle",- "center_mm": [- 7.62,- 2.54- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- },- {- "number": "8",- "shape": "circle",- "center_mm": [- 7.62,- 0.0- ],- "size_mm": [- 1.6,- 1.6- ],- "rot": 0.0- }- ]-}+ "seating_z_mm": -3.3+ },+ "sources": {+ "glb": "as393p-e1-etched.glb",+ "glb_sha256": "7241ee8cfe9a6ac33619616ab35983728f107c62be34f7c46fe6811452999f3d",+ "footprint": "as393p-e1.kicad_mod",+ "footprint_sha256": "222fb44370968119abbd978176814cc43a71bc32ac2de275d8a3c418c0830fc6",+ "pins": "page.json component.pins",+ "pins_sha256": "e3a6a6b430ed1c7c8ecb10b3c5b3172c7bbaf435ec2eaf7b937dd992c6b11931"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+ {+ "pad": "1",+ "text": "OUTPUT1",+ "x": -0.95,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "INPUT1-",+ "x": -0.95,+ "y": 2.54,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "INPUT1+",+ "x": -0.95,+ "y": 5.08,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "GND",+ "x": -0.95,+ "y": 7.62,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "INPUT2+",+ "x": 8.57,+ "y": 7.62,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "INPUT2-",+ "x": 8.57,+ "y": 5.08,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "OUTPUT2",+ "x": 8.57,+ "y": 2.54,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "VCC",+ "x": 8.57,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "circle",+ "center_mm": [+ 0.0,+ 2.54+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "circle",+ "center_mm": [+ 0.0,+ 5.08+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "circle",+ "center_mm": [+ 0.0,+ 7.62+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "circle",+ "center_mm": [+ 7.62,+ 7.62+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "circle",+ "center_mm": [+ 7.62,+ 5.08+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "circle",+ "center_mm": [+ 7.62,+ 2.54+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "circle",+ "center_mm": [+ 7.62,+ 0.0+ ],+ "size_mm": [+ 1.6,+ 1.6+ ],+ "rot": 0.0+ }+ ]+}
package.json+17−18@@ -1,6 +1,6 @@ { "slug": "as393p-e1",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Diodes Incorporated Comparators, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -54,7 +54,7 @@ "mouser": "621-AS393P-E1" }, "distributor_check": {- "checked_at": "2026-11-12T03:51:59Z",+ "checked_at": "2026-11-12T05:24:34Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "AS393P-E1DI-ND",@@ -70,49 +70,49 @@ "number": "1", "name": "OUTPUT1", "type": "output",- "description": "Open-collector output of comparator 1, with 200mV typical saturation voltage at 4mA sink and 6.0mA minimum output sink current."+ "description": "Open-collector output of comparator 1, with a saturation voltage of 200 mV typical and 400 mV maximum at 4 mA sink, and a minimum output sink current of 6.0 mA." }, { "number": "2", "name": "INPUT1-", "type": "input",- "description": "Inverting input of comparator 1, with common-mode range from 0V to VCC-1.5V and differential input up to 40V."+ "description": "Inverting input of comparator 1; the input common-mode voltage must not go below ground by more than 0.3 V at +25°C, and the input may be taken to +36 V without damage." }, { "number": "3", "name": "INPUT1+", "type": "input",- "description": "Non-inverting input of comparator 1, with common-mode range from 0V to VCC-1.5V and differential input up to 40V."+ "description": "Non-inverting input of comparator 1; the input common-mode range is 0 V to VCC-1.5 V at VCC = 30 V, and the input may be taken to +36 V without damage." }, { "number": "4", "name": "GND", "type": "power_in",- "description": "Ground reference (0V) for the device, or negative supply in split-supply operation."+ "description": "Ground reference (0 V) for the device, the reference for the input common-mode voltage range." }, { "number": "5", "name": "INPUT2+", "type": "input",- "description": "Non-inverting input of comparator 2, with common-mode range from 0V to VCC-1.5V and differential input up to 40V."+ "description": "Non-inverting input of comparator 2; the input common-mode range is 0 V to VCC-1.5 V at VCC = 30 V, and the input may be taken to +36 V without damage." }, { "number": "6", "name": "INPUT2-", "type": "input",- "description": "Inverting input of comparator 2, with common-mode range from 0V to VCC-1.5V and differential input up to 40V."+ "description": "Inverting input of comparator 2; the input common-mode voltage must not go below ground by more than 0.3 V at +25°C, and the input may be taken to +36 V without damage." }, { "number": "7", "name": "OUTPUT2", "type": "output",- "description": "Open-collector output of comparator 2, with 200mV typical saturation voltage at 4mA sink and 6.0mA minimum output sink current."+ "description": "Open-collector output of comparator 2, with a saturation voltage of 200 mV typical and 400 mV maximum at 4 mA sink, and a minimum output sink current of 6.0 mA." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Positive supply, recommended 2V to 36V single supply with absolute maximum of 40V."+ "description": "Positive supply: 2 V to 36 V for single supply, or ±1.0 V to ±18 V for dual supplies." } ], "provenance": {@@ -120,18 +120,17 @@ "factory_chain": { "factory": "2.0.0", "extractor": "extract_pins 0.3",- "primary_model": "claude-sonnet-5-5",- "primary_mode": "text+vision",- "consensus_model": "claude-opus-5-5",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5", "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: AS393P-E1 is the PDIP-8 variant per the ordering table (page 5), and its pinout was read from the PD",- "vision extraction: provenance cannot be text-verified; needs consensus"+ "extractor flagged: The PDIP-8 pin-assignment text extraction lists the pin numbers (1,2,3,4,8,7,6,5) and the signal nam; The MPN AS393P-E1 is sold in PDIP-8 (Lead Free, 50 pcs tube) and the datasheet marks it NRND (Not Re" ], "pages_sent": 14,- "cost_usd": 0.1982,- "at": "2026-11-12T03:51:51"+ "cost_usd": 0.1329,+ "at": "2026-11-12T05:24:27" }, "datasheet": { "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8560098212876357632",@@ -186,7 +185,7 @@ "zmin_mm": -3.3, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "b23c6da34b2fd6da3439cb5fdfbf5912aa103d579010eefe03c191ee3669492f",+ "sha256": "2584d9dfe65163ee0ad2945071b77fea24544e34369fb2d03882f15e30e79c43", "checked": "2026-11-12", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }
page.json+20−19@@ -4,7 +4,7 @@ "slug": "as393p-e1", "title": "AS393P-E1", "brief": "Diodes Incorporated Comparators, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "621-AS393P-E1" }, "distributor_check": {- "checked_at": "2026-11-12T03:51:59Z",+ "checked_at": "2026-11-12T05:24:34Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "AS393P-E1DI-ND",@@ -52,49 +52,49 @@ "number": "1", "name": "OUTPUT1", "type": "output",- "description": "Open-collector output of comparator 1, with 200mV typical saturation voltage at 4mA sink and 6.0mA minimum output sink current."+ "description": "Open-collector output of comparator 1, with a saturation voltage of 200 mV typical and 400 mV maximum at 4 mA sink, and a minimum output sink current of 6.0 mA." }, { "number": "2", "name": "INPUT1-", "type": "input",- "description": "Inverting input of comparator 1, with common-mode range from 0V to VCC-1.5V and differential input up to 40V."+ "description": "Inverting input of comparator 1; the input common-mode voltage must not go below ground by more than 0.3 V at +25°C, and the input may be taken to +36 V without damage." }, { "number": "3", "name": "INPUT1+", "type": "input",- "description": "Non-inverting input of comparator 1, with common-mode range from 0V to VCC-1.5V and differential input up to 40V."+ "description": "Non-inverting input of comparator 1; the input common-mode range is 0 V to VCC-1.5 V at VCC = 30 V, and the input may be taken to +36 V without damage." }, { "number": "4", "name": "GND", "type": "power_in",- "description": "Ground reference (0V) for the device, or negative supply in split-supply operation."+ "description": "Ground reference (0 V) for the device, the reference for the input common-mode voltage range." }, { "number": "5", "name": "INPUT2+", "type": "input",- "description": "Non-inverting input of comparator 2, with common-mode range from 0V to VCC-1.5V and differential input up to 40V."+ "description": "Non-inverting input of comparator 2; the input common-mode range is 0 V to VCC-1.5 V at VCC = 30 V, and the input may be taken to +36 V without damage." }, { "number": "6", "name": "INPUT2-", "type": "input",- "description": "Inverting input of comparator 2, with common-mode range from 0V to VCC-1.5V and differential input up to 40V."+ "description": "Inverting input of comparator 2; the input common-mode voltage must not go below ground by more than 0.3 V at +25°C, and the input may be taken to +36 V without damage." }, { "number": "7", "name": "OUTPUT2", "type": "output",- "description": "Open-collector output of comparator 2, with 200mV typical saturation voltage at 4mA sink and 6.0mA minimum output sink current."+ "description": "Open-collector output of comparator 2, with a saturation voltage of 200 mV typical and 400 mV maximum at 4 mA sink, and a minimum output sink current of 6.0 mA." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Positive supply, recommended 2V to 36V single supply with absolute maximum of 40V."+ "description": "Positive supply: 2 V to 36 V for single supply, or ±1.0 V to ±18 V for dual supplies." } ], "provenance": {@@ -102,18 +102,17 @@ "factory_chain": { "factory": "2.0.0", "extractor": "extract_pins 0.3",- "primary_model": "claude-sonnet-5-5",- "primary_mode": "text+vision",- "consensus_model": "claude-opus-5-5",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5", "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: AS393P-E1 is the PDIP-8 variant per the ordering table (page 5), and its pinout was read from the PD",- "vision extraction: provenance cannot be text-verified; needs consensus"+ "extractor flagged: The PDIP-8 pin-assignment text extraction lists the pin numbers (1,2,3,4,8,7,6,5) and the signal nam; The MPN AS393P-E1 is sold in PDIP-8 (Lead Free, 50 pcs tube) and the datasheet marks it NRND (Not Re" ], "pages_sent": 14,- "cost_usd": 0.1982,- "at": "2026-11-12T03:51:51"+ "cost_usd": 0.1329,+ "at": "2026-11-12T05:24:27" }, "datasheet": { "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8560098212876357632",@@ -168,7 +167,7 @@ "zmin_mm": -3.3, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "b23c6da34b2fd6da3439cb5fdfbf5912aa103d579010eefe03c191ee3669492f",+ "sha256": "2584d9dfe65163ee0ad2945071b77fea24544e34369fb2d03882f15e30e79c43", "checked": "2026-11-12", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }@@ -598,5 +597,7 @@ ], "visibility": { "public": true- }+ },+ "description": "Diodes Incorporated Comparators, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }