component
APX823-44W5G-7
Public Made by Adomby adom
Diodes Incorporated Supervisor And Reset ICs, SOT-25-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAPX823-44W5G-7
Diodes Incorporated · Supervisor And Reset ICs · SOT-25-5
APX823-44W5G-7 from Diodes Incorporated, in a SOT-25-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Active-low reset output, asserted when VCC is below the threshold VTH- (4.38V typ for -44), when MR is low, or when the watchdog times out, and held for td (200ms typ) after release. |
| 2 | GND | power_in | Ground. |
| 3 | MR | input | Active-low manual reset input with internal 60kΩ pull-up; a low level causes RESET to become active. |
| 4 | WDI | input | Watchdog input triggered by a positive or negative transition within the time-out interval (1.6s typ); leaving it unconnected disables the watchdog. |
| 5 | VCC | power_in | Operating voltage input, 1.1V to 5.5V recommended (6.0V absolute maximum), with a 0.1µF ceramic bypass capacitor placed near the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Supply Voltage (recommended) | VCC | 1.1 | 5.5 | V | 3 | ||
| High-level Input Voltage at MR and WDI (printed as 0.7 x VCC) | VIH | 0.7 | V | 3 | |||
| Low-level Input Voltage at MR and WDI (printed as 0.3 x VCC) | VIL | 0.3 | V | 3 | |||
| Input Voltage (max printed as VCC+0.3) | VIN | 0 | V | 3 | |||
| Input Transition Rise and Fall Rate at MR or WDI | Δt/ΔV | 100 | ns/V | 3 | |||
| Operating Ambient Temperature Range | TA | -40 | 85 | oC | 3 | ||
| VCC Rising Time (VCC = 0~VT) | TR | 100 | V/uS | VCC = 0~VT | 3 | ||
| ESD HBM Human Body Model ESD Protection | ESD HBM | 5 | KV | Human Body Model | 3 | ||
| ESD MM Machine Model ESD Protection | ESD MM | 200 | V | Machine Model | 3 | ||
| VCC Supply Voltage (absolute maximum) | VCC | 6 | V | 3 | |||
| VRESET: RESET, RESET-bar, MR, WDI (min -0.3; max printed as VCC+0.3) | VRESET | -0.3 | V | 3 | |||
| Input Current VCC | ICC | 20 | mA | 3 | |||
| Maximum High Output Current | IO | 20 | mA | 3 | |||
| Continuous Total Power Dissipation SOT25 power rating | PD | 500 | mW | SOT25, TA = 25oC power rating | 3 | ||
| Continuous Total Power Dissipation SOT25 power rating | PD | 220 | mW | SOT25, TA = 70oC power rating | 3 | ||
| Continuous Total Power Dissipation SOT25 power rating | PD | 125 | mW | SOT25, TA = 85oC power rating | 3 | ||
| Derating Factor Above TA = 25oC, SOT25 | PD | 6.2 | mW/°C | SOT25, above TA = 25oC | 3 | ||
| Operating Junction Temperature Range | TOP | -40 | 105 | °C | 3 | ||
| Storage Temperature Range | TST | -65 | 150 | °C | 3 | ||
| Low-level Output Voltage RESET (APX823/824/825A -46/44 group) | VOL | 0.4 | V | VCC= VTH- -0.2V, IOL=3mA | 4 | ||
| Power-up Reset Voltage | VRESET | 0.4 | V | VCC > 1.1V, IOL=20μA | 4 | ||
| Negative-going Input Threshold Voltage VTH- (-44 variant) | VTH- | 4.31 | 4.38 | 4.47 | V | TA = 0 oC -85oC | 4 |
| Negative-going Input Threshold Voltage VTH- (-44 variant) | VTH- | 4.19 | 4.38 | 4.56 | V | TA= -40oC -85oC | 4 |
| Hysteresis at VCC Input (-44 variant) | Vhys | 50 | mV | 5 | |||
| TS Set-up Time | TS | 20 | μs | VCC = VTH to (VTH, 100mV) | 5 | ||
| Average High-level Input Current WDI | IIH(AV) | 120 | μA | WDI=VCC, Time average (dc=88%) | 5 | ||
| Average Low-level Input Current WDI | IIL(AV) | -15 | μA | WDI=0.3V, VCC=5.5V time average (dc=12%) | 5 | ||
| High-level Input Current WDI | IIH | 120 | 160 | μA | WDI=VCC | 5 | |
| Low-level Input Current WDI | IIL | 120 | 160 | μA | WDI=0.3V, VCC=5.5V | 5 | |
| Supply Current (WDI and MR unconnected, outputs unconnected) | ICC | 30 | 40 | μA | WDI and MR unconnected, outputs unconnected, VCC = VTH-+0.2V | 5 | |
| Internal Pull-up Resistor at MR | RPU | 60 | kΩ | 5 | |||
| VOUT Temperature Coefficient | TC | 50 | ppm/oC | 5 | |||
| Input Capacitance at MR, WDI | Ci | 5 | pF | VI = 0V to 5.5V | 5 | ||
| Pulse Width at MR | tW | 100 | ns | VCC> VTH-+0.2V, VIL=0.3 VCC, VIH=0.7 VCC | 6 | ||
| Pulse Width at WDI | tW | 50 | ns | VCC> VTH-+0.2V, VIL=0.3 VCC, VIH=0.7 VCC | 6 | ||
| Watchdog Time Out | ttout | 1.12 | 1.6 | 2.4 | s | VCC> VTH-+0.2V, See timing diagram | 6 |
| Delay Time | td | 140 | 200 | 280 | ms | VCC> VTH-+0.2V, See timing diagram | 6 |
| Propagation Delay Time High-to-low, MR to RESET (APX823/825A) | tPHL | 0.1 | μs | VCC> VTH-+0.2V, VIL=0.3 VCC, VIH=0.7 VCC | 6 | ||
| Propagation Delay Time High-to-low, VCC to RESET | tPHL | 25 | μs | VIL= VTH- -0.2V, VIH= VTH-+0.2V | 6 | ||
| Thermal Resistance Junction-to-Ambient, SOT25 | θJA | 161 | oC/W | Note 6: FR-4 PCB, 2oz copper, minimum recommended pad layout | 5 | ||
| Thermal Resistance Junction-to-Case, SOT25 | θJC | 27 | oC/W | Note 6: FR-4 PCB, 2oz copper, minimum recommended pad layout | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: | 12 |
CAD (KiCad official)
- Symbol:
APX823-44W5G-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25-5 (KiCad packages3D, STEP)
- 3D model files:
apx823-44w5g-7-etched.step/apx823-44w5g-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);apx823-44w5g-7.step/apx823-44w5g-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (13 pp, sha256
fdb2f5991123ff64, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).