main
History Download
Ray Publish 0.1.0 b318b8a

AP8801SG-13

Diodes Incorporated · LED Drivers · SOP-8

AP8801SG-13 from Diodes Incorporated, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection; leave this pin unconnected on the board.
2 SET input Sets the nominal output current through the resistor between VIN and SET, where VTHD is nominally 200mV; absolute maximum SET voltage is +0.3 to -5 V.
3 VIN power_in Input supply pin, operating range 8.0 V to 48.0 V relative to GND, which must be locally bypassed; absolute maximum is -0.3 to +50 V.
4 GND power_in Ground pin for the device.
5 GND power_in Ground pin for the device.
6 SW output Switch pin connecting the inductor and freewheeling diode, with absolute maximum voltage of -0.3 to +50 V; keep track length short to reduce EMI.
7 CTRL input Dual-function dimming input: 0.2 V or lower shuts off the output into standby, analog 0.3 V to 2.5 V sets 25% to 200% of nominal current, PWM is accepted up to 100%, and absolute maximum is -0.3 to +6 V.
8 SW output Switch pin connecting the inductor and freewheeling diode, with absolute maximum voltage of -0.3 to +50 V; keep track length short to reduce EMI.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package SOP-8
Category Nixie Tube Driver/LED Driver
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Continuous Switch Current IOUT 500 mA 3
Quiescent Current IQ 78 120 μA 3
Internal Threshold Voltage VTHD 184 200 216 mV 3
SET Pin Input Current ISET -0.2 7 μA VSET = VIN 3
On Resistance of MOSFET RDS(ON) 0.7 1.15 Ω ISW = 0.4A 3
Switch Leakage Current ISW_LEAKAGE 8 μA 3
Operating Input Voltage Relative to GND VIN 8 48 V Relative to GND 3
Voltage range for 24% to 200% DC Dimming VCTRLDC 0.3 2.5 V Relative to GND (Note 4) 3
Voltage Low for PWM Dimming VCTRLL 0 0.2 V Relative to GND 3
Maximum Switching Frequency fOSC 625 kHz Note 5 3
Ambient Temperature Range TA -40 105 °C 3
Duty Cycle 0.1 0.95 , Using Inductor ≥ 100µH (Note 6) 3
VIN Pin Voltage VIN -0.3 50 V Absolute maximum rating at TA = +25°C 2
SW Voltage VSW -0.3 50 V Absolute maximum rating at TA = +25°C 2
CTRL Pin Input Voltage VCTRL -0.3 6 V Absolute maximum rating at TA = +25°C 2
SET Voltage VSENSE -5 0.3 V Absolute maximum rating at TA = +25°C 2
Junction Temperature TJ 150 °C Absolute maximum rating at TA = +25°C 2
Lead Temperature Soldering TLEAD 300 °C Absolute maximum rating at TA = +25°C 2
Storage Temperature Range TST -65 150 °C Absolute maximum rating at TA = +25°C 2
Thermal Resistance Junction-to-Ambient ϴJA 88 °C/W SO-8 (Note 8) 3
Thermal Resistance Junction-to-Case ϴJC 58 °C/W SO-8 (Note 8) 3

CAD (KiCad official)

  • Symbol: AP8801SG-13
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ap8801sg-13-etched.step / ap8801sg-13-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ap8801sg-13.step / ap8801sg-13.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (15 pp, sha256 f468269d49ee7e9e, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF