3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAP8801SG-13
Diodes Incorporated · LED Drivers · SOP-8
AP8801SG-13 from Diodes Incorporated, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; leave this pin unconnected on the board. |
| 2 | SET | input | Sets the nominal output current through the resistor between VIN and SET, where VTHD is nominally 200mV; absolute maximum SET voltage is +0.3 to -5 V. |
| 3 | VIN | power_in | Input supply pin, operating range 8.0 V to 48.0 V relative to GND, which must be locally bypassed; absolute maximum is -0.3 to +50 V. |
| 4 | GND | power_in | Ground pin for the device. |
| 5 | GND | power_in | Ground pin for the device. |
| 6 | SW | output | Switch pin connecting the inductor and freewheeling diode, with absolute maximum voltage of -0.3 to +50 V; keep track length short to reduce EMI. |
| 7 | CTRL | input | Dual-function dimming input: 0.2 V or lower shuts off the output into standby, analog 0.3 V to 2.5 V sets 25% to 200% of nominal current, PWM is accepted up to 100%, and absolute maximum is -0.3 to +6 V. |
| 8 | SW | output | Switch pin connecting the inductor and freewheeling diode, with absolute maximum voltage of -0.3 to +50 V; keep track length short to reduce EMI. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOP-8 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Continuous Switch Current | IOUT | 500 | mA | 3 | |||
| Quiescent Current | IQ | 78 | 120 | μA | 3 | ||
| Internal Threshold Voltage | VTHD | 184 | 200 | 216 | mV | 3 | |
| SET Pin Input Current | ISET | -0.2 | 7 | μA | VSET = VIN | 3 | |
| On Resistance of MOSFET | RDS(ON) | 0.7 | 1.15 | Ω | ISW = 0.4A | 3 | |
| Switch Leakage Current | ISW_LEAKAGE | 8 | μA | 3 | |||
| Operating Input Voltage Relative to GND | VIN | 8 | 48 | V | Relative to GND | 3 | |
| Voltage range for 24% to 200% DC Dimming | VCTRLDC | 0.3 | 2.5 | V | Relative to GND (Note 4) | 3 | |
| Voltage Low for PWM Dimming | VCTRLL | 0 | 0.2 | V | Relative to GND | 3 | |
| Maximum Switching Frequency | fOSC | 625 | kHz | Note 5 | 3 | ||
| Ambient Temperature Range | TA | -40 | 105 | °C | 3 | ||
| Duty Cycle | 0.1 | 0.95 | , | Using Inductor ≥ 100µH (Note 6) | 3 | ||
| VIN Pin Voltage | VIN | -0.3 | 50 | V | Absolute maximum rating at TA = +25°C | 2 | |
| SW Voltage | VSW | -0.3 | 50 | V | Absolute maximum rating at TA = +25°C | 2 | |
| CTRL Pin Input Voltage | VCTRL | -0.3 | 6 | V | Absolute maximum rating at TA = +25°C | 2 | |
| SET Voltage | VSENSE | -5 | 0.3 | V | Absolute maximum rating at TA = +25°C | 2 | |
| Junction Temperature | TJ | 150 | °C | Absolute maximum rating at TA = +25°C | 2 | ||
| Lead Temperature Soldering | TLEAD | 300 | °C | Absolute maximum rating at TA = +25°C | 2 | ||
| Storage Temperature Range | TST | -65 | 150 | °C | Absolute maximum rating at TA = +25°C | 2 | |
| Thermal Resistance Junction-to-Ambient | ϴJA | 88 | °C/W | SO-8 (Note 8) | 3 | ||
| Thermal Resistance Junction-to-Case | ϴJC | 58 | °C/W | SO-8 (Note 8) | 3 |
CAD (KiCad official)
- Symbol:
AP8801SG-13 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ap8801sg-13-etched.step/ap8801sg-13-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap8801sg-13.step/ap8801sg-13.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (15 pp, sha256
f468269d49ee7e9e, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).