AP7375Q-33SP-13

{
  "slug": "ap7375q-33sp-13",
  "version": "0.1.0",
  "type": "component",
  "description": "Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ap7375q-33sp-13",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ap7375q-33sp-13.kicad_sym",
    "ap7375q-33sp-13.kicad_mod",
    "ap7375q-33sp-13.glb",
    "ap7375q-33sp-13.step",
    "ap7375q-33sp-13.lbr",
    "docs/hero.png",
    "docs/ap7375q-33sp-13-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ap7375q-33sp-13-hero.glb",
    "ap7375q-33sp-13-hero.overlay.json",
    "ap7375q-33sp-13-etched.glb"
  ],
  "component": {
    "mpn": "AP7375Q-33SP-13",
    "manufacturer": "Diodes Incorporated",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8560098842009509888",
    "parts": {
      "symbol": "ap7375q-33sp-13.kicad_sym",
      "footprint": "ap7375q-33sp-13.kicad_mod",
      "model_3d": "ap7375q-33sp-13-hero.glb",
      "model_3d_plain": "ap7375q-33sp-13-etched.glb",
      "model_3d_step": "ap7375q-33sp-13-etched.step",
      "model_3d_step_plain": "ap7375q-33sp-13.step",
      "lbr": "ap7375q-33sp-13.lbr"
    },
    "distributor_links": {
      "lcsc": "C5370068",
      "digikey": "31-AP7375Q-33SP-13TR-ND",
      "mouser": "621-AP7375Q-33SP-13"
    },
    "distributor_check": {
      "checked_at": "2026-10-21T01:18:50Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "31-AP7375Q-33SP-13TR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "621-AP7375Q-33SP-13",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VOUT",
        "type": "power_out",
        "description": "Regulated output voltage of the LDO, fixed at 3.3V for this variant, with absolute maximum rating of -0.3 to 6 V and a 1 µF minimum ceramic output capacitor required for stability."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected internally; the datasheet recommends connecting this pin to GND to maximize PCB copper for thermal dissipation."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected internally; the datasheet recommends connecting this pin to GND to maximize PCB copper for thermal dissipation."
      },
      {
        "number": "4",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected internally; the datasheet recommends connecting this pin to GND to maximize PCB copper for thermal dissipation."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin for the regulator, to be connected to the external circuit ground to limit voltage drop from trace impedance."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected internally; the datasheet recommends connecting this pin to GND to maximize PCB copper for thermal dissipation."
      },
      {
        "number": "7",
        "name": "EN",
        "type": "input",
        "description": "Enable input that turns the LDO output on and off; EN high level is at least 1 V, EN low level is at most 0.4 V, and the absolute maximum EN voltage is 55 V."
      },
      {
        "number": "8",
        "name": "VIN",
        "type": "power_in",
        "description": "Input voltage pin with recommended supply range of 3.0 V to 45 V and absolute maximum rating of -0.3 to 55 V, requiring a 1 µF ceramic input capacitor close to the device."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The SO-8EP pin mapping was taken from the Pin Descriptions table on page 2 (SO-8EP column), because ; The exposed pad (EP) is not given a numeric pin number in the datasheet; it is listed as 'EP'. Its t; The datasheet does not give a package-specific pin count or separate pin-to-pin drawing for SO-8EP i",
          "dropped thermal pad ['EP'] absent from footprint"
        ],
        "pages_sent": 18,
        "cost_usd": 0.0659,
        "at": "2026-10-21T01:15:45"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8560098842009509888",
        "pages": 18,
        "sha256": "c298cf9459111ab2",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ap7375q-33sp-13.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ap7375q-33sp-13-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d30d4f21ef2ce13ec5d2c2325bf37ad2f3a32df6003e1872ad1ffd57c3c98477",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}