component
AP7365-25EG-13
Public Made by Adomby adom
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AP7365-25EG-13
Diodes Incorporated · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223
AP7365-25EG-13 from Diodes Incorporated, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated voltage output pin, to be bypassed to ground through a 1µF MLCC capacitor. |
| 2 | GND | power_in | Ground pin, also connected to the package tab (GND (TAB)). |
| 3 | IN | power_in | Voltage input pin (2V to 6V recommended), to be bypassed to ground through at least a 1µF MLCC capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-223 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VOUT | -2 | 2 | % | TA = -40°C to +85°C, IOUT = 10% of IOUT-Max | 3 | |
| Load Regulation | VOUT/VOUT | -1 | 1 | % | VIN = (VOUT +1V) to VIN-Max, IOUT = 1mA to 600mA | 3 | |
| Line Regulation | VOUT/VIN/V | 0.02 | 0.2 | %/V | VIN = (VOUT +1V) to VIN-Max, VEN = VIN, IOUT = 1mA | 3 | |
| Dropout Voltage | VDROPOUT | 300 | 400 | mV | VOUT ≥ 2.5V, IOUT = 600mA | 3 | |
| Input Quiescent Current | IQ | 35 | 80 | µA | VEN = VIN, IOUT = 0mA | 3 | |
| Input Shutdown Current | ISHDN | 0.1 | 1 | µA | VEN = 0V, IOUT = 0mA | 3 | |
| Input Leakage Current | ILEAK | 0.1 | 1 | µA | VEN = 0V, OUT grounded | 3 | |
| Current Limit | ILIMIT | 0.8 | 1.4 | A | VIN = VIN-Min to VIN-Max, VOUT/ROUT = 2.5A | 3 | |
| EN Input Logic Low Voltage | VIL | 0.4 | V | VIN = VIN-Min to VIN-Max | 3 | ||
| EN Input Logic High Voltage | VIH | 1.4 | V | VIN = VIN-Min to VIN-Max | 3 | ||
| EN Input Current | IEN | -1 | 1 | µA | VIN = 0V or VIN-Max | 3 | |
| Input Voltage (recommended operating) | VIN | 2 | 6 | V | 3 | ||
| Output Current (recommended operating) | IOUT | 0 | 600 | mA | Note 4: stable regulated output without load current | 3 | |
| Operating Ambient Temperature | TA | -40 | 85 | °C | 3 | ||
| ESD Protection, Human Body Model | ESD HBM | 2000 | V | 3 | |||
| ESD Protection, Machine Model | ESD MM | 200 | V | 3 | |||
| Input Voltage (absolute maximum) | VIN | 6.5 | V | 3 | |||
| Storage Temperature Range | TST | -65 | 150 | °C | 3 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Thermal Resistance Junction-to-Ambient, SOT223 | θJA | 142 | °C/W | Note 7: FR-4 PCB, 1oz copper, minimum recommended pad layout | 4 | ||
| Thermal Resistance Junction-to-Case, SOT223 | θJC | 39 | °C/W | Note 7: FR-4 PCB, 1oz copper, minimum recommended pad layout | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | reduce noise. For PCB layout, a wide copper trace is required for both IN and GND pins. A lower ESR capacitor type allows the use of less | 8 |
CAD (KiCad official)
- Symbol:
AP7365-25EG-13 - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files:
ap7365-25eg-13-etched.step/ap7365-25eg-13-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap7365-25eg-13.step/ap7365-25eg-13.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (18 pp, sha256
7ec2b65a0dbeaec0, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AP7365-25EG-13
**Diodes Incorporated** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223
AP7365-25EG-13 from Diodes Incorporated, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated voltage output pin, to be bypassed to ground through a 1µF MLCC capacitor. |
| 2 | GND | power_in | Ground pin, also connected to the package tab (GND (TAB)). |
| 3 | IN | power_in | Voltage input pin (2V to 6V recommended), to be bypassed to ground through at least a 1µF MLCC capacitor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-223 |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VOUT | -2 | | 2 | % | TA = -40°C to +85°C, IOUT = 10% of IOUT-Max | 3 |
| Load Regulation | VOUT/VOUT | -1 | | 1 | % | VIN = (VOUT +1V) to VIN-Max, IOUT = 1mA to 600mA | 3 |
| Line Regulation | VOUT/VIN/V | | 0.02 | 0.2 | %/V | VIN = (VOUT +1V) to VIN-Max, VEN = VIN, IOUT = 1mA | 3 |
| Dropout Voltage | VDROPOUT | | 300 | 400 | mV | VOUT ≥ 2.5V, IOUT = 600mA | 3 |
| Input Quiescent Current | IQ | | 35 | 80 | µA | VEN = VIN, IOUT = 0mA | 3 |
| Input Shutdown Current | ISHDN | | 0.1 | 1 | µA | VEN = 0V, IOUT = 0mA | 3 |
| Input Leakage Current | ILEAK | | 0.1 | 1 | µA | VEN = 0V, OUT grounded | 3 |
| Current Limit | ILIMIT | 0.8 | 1.4 | | A | VIN = VIN-Min to VIN-Max, VOUT/ROUT = 2.5A | 3 |
| EN Input Logic Low Voltage | VIL | | | 0.4 | V | VIN = VIN-Min to VIN-Max | 3 |
| EN Input Logic High Voltage | VIH | 1.4 | | | V | VIN = VIN-Min to VIN-Max | 3 |
| EN Input Current | IEN | -1 | | 1 | µA | VIN = 0V or VIN-Max | 3 |
| Input Voltage (recommended operating) | VIN | 2 | | 6 | V | | 3 |
| Output Current (recommended operating) | IOUT | 0 | | 600 | mA | Note 4: stable regulated output without load current | 3 |
| Operating Ambient Temperature | TA | -40 | | 85 | °C | | 3 |
| ESD Protection, Human Body Model | ESD HBM | | | 2000 | V | | 3 |
| ESD Protection, Machine Model | ESD MM | | | 200 | V | | 3 |
| Input Voltage (absolute maximum) | VIN | | | 6.5 | V | | 3 |
| Storage Temperature Range | TST | -65 | | 150 | °C | | 3 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 3 |
| Thermal Resistance Junction-to-Ambient, SOT223 | θJA | | 142 | | °C/W | Note 7: FR-4 PCB, 1oz copper, minimum recommended pad layout | 4 |
| Thermal Resistance Junction-to-Case, SOT223 | θJC | | 39 | | °C/W | Note 7: FR-4 PCB, 1oz copper, minimum recommended pad layout | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | reduce noise. For PCB layout, a wide copper trace is required for both IN and GND pins. A lower ESR capacitor type allows the use of less | 8 |
## CAD (KiCad official)
- Symbol: `AP7365-25EG-13`
- Footprint: `Package_TO_SOT_SMD:SOT-223-3_TabPin2`
- 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files: `ap7365-25eg-13-etched.step` / `ap7365-25eg-13-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ap7365-25eg-13.step` / `ap7365-25eg-13.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8560094629007032320) (18 pp, sha256 `7ec2b65a0dbeaec0`, retrieved 2026-10-20, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ap7365-25eg-13-datasheet.pdf)