AP7362-33SP-13

{
 "schema": "adom.pads/1",
 "slug": "ap7362-33sp-13",
 "footprint": "Diodes_SO-8EP",
 "generated_from": {
  "footprint": "Diodes_SO-8EP@sha256:e4747640ff122bb4",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.4975,
   -1.905
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "Diodes_SO-8EP@sha256:e4747640ff122bb4"
 },
 "pad_count": 9,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "rect",
   "at": [
    -2.4975,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.505,
    0.802
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "GND",
   "type": "power_in",
   "description": "Device ground return. Also serves as the reference for the internal band-gap and output feedback network. Should be tied to the exposed pad copper plane.",
   "is_pin1": true,
   "source": {
    "geometry": "Diodes_SO-8EP.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "rect",
   "at": [
    -2.4975,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.505,
    0.802
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "EN",
   "type": "input",
   "description": "Enable input, active high. VIH ≥ 1.4V turns the regulator on; VIL ≤ 0.65V places the device in shutdown (IGND ≈ 25nA). Absolute-max range -0.3V to 6.0V; do not float.",
   "is_pin1": false,
   "source": {
    "geometry": "Diodes_SO-8EP.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "rect",
   "at": [
    -2.4975,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.505,
    0.802
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "IN",
   "type": "power_in",
   "description": "Voltage input pin. Operating range 2.2V to 5.5V (absolute-max 6.0V). Pins 3 and 4 are internally connected and must be tied together on the PCB; place a ≥10µF input capacitor close to these pins.",
   "is_pin1": false,
   "source": {
    "geometry": "Diodes_SO-8EP.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "rect",
   "at": [
    -2.4975,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.505,
    0.802
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "IN",
   "type": "power_in",
   "description": "Voltage input pin. Internally strapped to pin 3; tie both externally and decouple with a ≥10µF ceramic input capacitor.",
   "is_pin1": false,
   "source": {
    "geometry": "Diodes_SO-8EP.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "rect",
   "at": [
    2.4975,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.505,
    0.802
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "OUT",
   "type": "power_out",
   "description": "Regulated 3.3V output pin (fixed AP7362-33 variant). Rated 1.5A continuous. Pins 5, 6, 7 are internally connected and must be tied together; requires a ≥10µF output capacitor (any type) for stability.",
   "is_pin1": false,
   "source": {
    "geometry": "Diodes_SO-8EP.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "rect",
   "at": [
    2.4975,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.505,
    0.802
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "OUT",
   "type": "power_out",
   "description": "Regulated output pin, internally strapped to pins 5 and 7. Tie all three externally to share the 1.5A load current and reduce metal resistance.",
   "is_pin1": false,
   "source": {
    "geometry": "Diodes_SO-8EP.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "rect",
   "at": [
    2.4975,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.505,
    0.802
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "OUT",
   "type": "power_out",
   "description": "Regulated output pin, internally strapped to pins 5 and 6. Tie all three externally at the ≥10µF output capacitor.",
   "is_pin1": false,
   "source": {
    "geometry": "Diodes_SO-8EP.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "rect",
   "at": [
    2.4975,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.505,
    0.802
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "NC",
   "type": "unconnected",
   "description": "No internal connection on this fixed-output (AP7362-33) variant. On the adjustable AP7362 variant this pin is the ADJ feedback input; leave it open or tie to ground for the fixed version.",
   "is_pin1": false,
   "source": {
    "geometry": "Diodes_SO-8EP.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "rect",
   "at": [
    0.0,
    0.0
   ],
   "rot": 0.0,
   "size": [
    2.613,
    3.502
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": true,
   "pin": "9",
   "name": "EP",
   "type": "power_in",
   "description": "Exposed thermal pad on the package underside. Die is electrically connected to EP; must be soldered to a copper area for heat removal (θJA ≈ 52.8 °C/W). Connect externally to GND, but do not use as the only ground connection.",
   "is_pin1": false,
   "source": {
    "geometry": "Diodes_SO-8EP.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}