AP7173-FNG-7

{
  "slug": "ap7173-fng-7",
  "version": "0.1.0",
  "type": "component",
  "description": "Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TDFN-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ap7173-fng-7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ap7173-fng-7.kicad_sym",
    "ap7173-fng-7.kicad_mod",
    "ap7173-fng-7.glb",
    "ap7173-fng-7.step",
    "ap7173-fng-7.lbr",
    "docs/hero.png",
    "docs/ap7173-fng-7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ap7173-fng-7-hero.glb",
    "ap7173-fng-7-hero.overlay.json",
    "ap7173-fng-7-etched.glb"
  ],
  "component": {
    "mpn": "AP7173-FNG-7",
    "manufacturer": "Diodes Incorporated",
    "package": "TDFN-10-EP(3x3)",
    "pin_count": 11,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588900447012720640",
    "parts": {
      "symbol": "ap7173-fng-7.kicad_sym",
      "footprint": "ap7173-fng-7.kicad_mod",
      "model_3d": "ap7173-fng-7-hero.glb",
      "model_3d_plain": "ap7173-fng-7-etched.glb",
      "model_3d_step": "ap7173-fng-7-etched.step",
      "model_3d_step_plain": "ap7173-fng-7.step",
      "lbr": "ap7173-fng-7.lbr"
    },
    "distributor_links": {
      "lcsc": "C154920",
      "digikey": "AP7173-FNG-7DITR-ND",
      "mouser": "621-AP7173-FNG-7"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T05:44:15Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "AP7173-FNG-7DITR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "621-AP7173-FNG-7",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IN",
        "type": "power_in",
        "description": "Power input pin for the regulator; the datasheet's recommended VIN range is 1.0V to 5.5V."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "power_in",
        "description": "Power input pin for the regulator; the datasheet's recommended VIN range is 1.0V to 5.5V."
      },
      {
        "number": "3",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good output that is pulled low when VOUT is below the PG threshold and goes high-impedance when VOUT exceeds it; use a 10kΩ to 1MΩ pull-up to a supply of up to 5.5V."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_in",
        "description": "Bias input that supplies the internal control circuitry and should be kept higher than VIN."
      },
      {
        "number": "5",
        "name": "EN",
        "type": "input",
        "description": "Enable pin that must be driven high or low and must not be left floating; high enables the regulator and low puts it into shutdown."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin for the regulator."
      },
      {
        "number": "7",
        "name": "SS",
        "type": "passive",
        "description": "Soft-start pin; a capacitor from this pin to ground sets the output soft-start ramp time, and the time is typically 100µS if no capacitor is connected."
      },
      {
        "number": "8",
        "name": "FB",
        "type": "input",
        "description": "Feedback pin that connects to an external voltage divider to set the output voltage."
      },
      {
        "number": "9",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output pin of the LDO."
      },
      {
        "number": "10",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated output pin of the LDO."
      },
      {
        "number": "11",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The thermal pad (exposed pad under the DFN3030-10 package) is listed as '—' in the pin table and has; The package hint was TDFN-10-EP(3x3), but the datasheet's ordering information lists AP7173-FNG-7 as; The IN voltage range of 1.0V to 5.5V comes from the Recommended Operating Conditions on page 4, not ",
          "exposed pad 11 added from the footprint"
        ],
        "pages_sent": 15,
        "cost_usd": 0.0739,
        "at": "2026-10-19T05:43:59"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588900447012720640",
        "pages": 15,
        "sha256": "35704e6ac6d2f4f6",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ap7173-fng-7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "738e2eb45860c11759f8e4f44ab26932b7c15e4d5d6c8c9ac22ae866a3e38711",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ap7173-fng-7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "138adf64eb94bb7d37dd4200430b2f17379f90cdd94413d90ed92f0c633ae482",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}