AP61302Z6-7

{
  "slug": "ap61302z6-7",
  "version": "0.1.0",
  "type": "component",
  "description": "Diodes Incorporated DC-DC Converters, SOT-563. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ap61302z6-7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ap61302z6-7.kicad_sym",
    "ap61302z6-7.kicad_mod",
    "ap61302z6-7.glb",
    "ap61302z6-7.step",
    "ap61302z6-7.lbr",
    "docs/hero.png",
    "docs/ap61302z6-7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ap61302z6-7-hero.glb",
    "ap61302z6-7-hero.overlay.json",
    "ap61302z6-7-etched.glb"
  ],
  "component": {
    "mpn": "AP61302Z6-7",
    "manufacturer": "Diodes Incorporated",
    "package": "SOT-563",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590907453800734720",
    "parts": {
      "symbol": "ap61302z6-7.kicad_sym",
      "footprint": "ap61302z6-7.kicad_mod",
      "model_3d": "ap61302z6-7-hero.glb",
      "model_3d_plain": "ap61302z6-7-etched.glb",
      "model_3d_step": "ap61302z6-7-etched.step",
      "model_3d_step_plain": "ap61302z6-7.step",
      "lbr": "ap61302z6-7.lbr"
    },
    "distributor_links": {
      "lcsc": "C3193204"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T17:18:52Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "FB",
        "type": "input",
        "description": "Feedback sensing terminal for the output voltage that connects to the output resistive divider, with a 0.6V ±2% reference in CCM."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground for the device."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Power input that supplies the IC and the step-down power MOSFETs, to be driven from 2.4V to 5.5V and bypassed to GND with a suitably large capacitor."
      },
      {
        "number": "4",
        "name": "SW",
        "type": "output",
        "description": "Power switching output node that supplies the output through the LC filter, with a DC absolute maximum range of -1.0V to VIN + 0.3V."
      },
      {
        "number": "5",
        "name": "EN",
        "type": "input",
        "description": "Enable input that turns the regulator on when driven high (typical rising threshold 0.91V) and off when driven low (typical falling threshold 0.83V), and also programs PFM or PWM operation."
      },
      {
        "number": "6",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good output that is pulled to GND when the output is outside its regulation limits or during soft-start, with a 40µs rising-edge delay and an internal 5MΩ pullup to VIN, rated -0.3V to +6.0V DC."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 6 is named OUT on the AP61300 and PG on the AP61302. The MPN AP61302Z6-7 is the PG variant (orde; The SW pin type is given as 'output' because the datasheet calls it a power switching output. Its ab"
        ],
        "pages_sent": 21,
        "cost_usd": 0.0935,
        "at": "2026-10-17T17:17:11"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590907453800734720",
        "pages": 21,
        "sha256": "d56a2758b53a63c0",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ap61302z6-7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.6,
          1.6,
          0.63
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "76c34aa4905777c0a8abe4718019904a3a9f8343cab7cc056f4516b7ef5165fc",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ap61302z6-7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.6,
          1.6,
          0.63
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3b7d42bfbed9bac2b69450da64af91bc1ea542fdfb63a8715c223b8bf3dfe9c2",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}