ap22814bw5-7

{
  "slug": "ap22814bw5-7",
  "version": "0.1.1",
  "type": "component",
  "description": "Diodes Incorporated AC-DC Controllers and Regulators, SOT-25. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "ap22814bw5-7"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ap22814bw5-7.kicad_sym",
    "ap22814bw5-7.kicad_mod",
    "ap22814bw5-7.glb",
    "ap22814bw5-7.step",
    "ap22814bw5-7.lbr",
    "docs/hero.png",
    "docs/ap22814bw5-7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ap22814bw5-7-etched.step",
    "ap22814bw5-7-etched.glb",
    "ap22814bw5-7-hero.glb",
    "ap22814bw5-7-hero.overlay.json"
  ],
  "component": {
    "mpn": "AP22814BW5-7",
    "manufacturer": "Diodes Incorporated",
    "package": "SOT-25",
    "pin_count": 5,
    "category": "AC-DC Controllers and Regulators",
    "parts": {
      "symbol": "ap22814bw5-7.kicad_sym",
      "footprint": "ap22814bw5-7.kicad_mod",
      "model_3d": "ap22814bw5-7-hero.glb",
      "model_3d_plain": "ap22814bw5-7.glb",
      "model_3d_step": "ap22814bw5-7-etched.step",
      "model_3d_step_plain": "ap22814bw5-7.step",
      "lbr": "ap22814bw5-7.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Switched voltage output pin. Connect a 0.1µF ceramic bypass capacitor plus a high-value bulk capacitor (≥10µF for USB, typ. 100µF/120µF) to GND close to the IC. Delivers up to 3.0A (AP22814) with ~50mΩ typical on-resistance; internally discharged to GND via ~90Ω when the switch is disabled."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference for all internal circuitry. Tie to the system ground plane with a low-impedance connection close to the input and output bypass capacitors."
      },
      {
        "number": "3",
        "name": "FLG",
        "type": "output",
        "description": "Open-drain fault flag output, active low. Asserts after a ~6ms deglitch on over-current or over-temperature conditions and remains asserted until both faults clear. Requires an external pull-up resistor (typ. 10kΩ) to a supply rail; FET on-resistance ≈40Ω (60Ω max) at 10mA, off-leakage ≤1µA."
      },
      {
        "number": "4",
        "name": "EN",
        "type": "input",
        "description": "Enable input (active LOW on the 'B' variant AP22814BW5-7). VIL ≤ 0.65V max drives the switch ON; VIH ≥ 1.5V drives it OFF. GPIO-compatible logic input; must NOT be left floating. Leakage ≤1µA at 0V or 5.5V. Hold in the disabled state while VIN is applied or removed."
      },
      {
        "number": "5",
        "name": "IN",
        "type": "power_in",
        "description": "Main input supply pin, 2.7V to 5.5V operating range (absolute max 6.0V). Connect a 1µF X7R/X5R low-ESR ceramic bypass capacitor to GND close to the IC; add a 10µF or 47µF bulk capacitor for heavy transient loads. UVLO releases at ~2.0V rising with ~180mV hysteresis."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C2150207",
      "digikey": "31-AP22814BW5-7TR-ND",
      "mouser": "621-AP22814BW5-7"
    },
    "distributor_check": {
      "checked_at": "2026-10-05T18:52:05Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": "31-AP22814BW5-7TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "621-AP22814BW5-7",
        "status": "found"
      }
    },
    "models_3d": [
      {
        "file": "ap22814bw5-7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ap22814bw5-7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "683c61b55fd4076a7c395e95328ab52a023823e3c344f354332e9934e9f3f53d",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}