ap22814bw5-7

@@ -0,0 +1,194 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "AP22814BW5-7",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 5,+      "span_mm": 3.6,+      "dash_mm": 0.12,+      "gap_mm": 0.072,+      "pad_stroke_mm": 0.03+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 8,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 5,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.288,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -1.4,+      1.4,+      -1.2,+      1.2+    ],+    "pads_bbox_mm": [+      -1.8,+      1.8,+      -1.25,+      1.25+    ],+    "seating_z_mm": -0.0+  },+  "sources": {+    "glb": "ap22814bw5-7-etched.glb",+    "glb_sha256": "bb0b2eec9a79d2a13c7e4cc06b0b79256e5460686a6500ba8ac6d23c19a59959",+    "footprint": "ap22814bw5-7.kicad_mod",+    "footprint_sha256": "455a3f7c3e5eb5b8847eaa5df23e18651e78ab9f75afd09a0883758a0d901761",+    "pins": "page.json component.pins",+    "pins_sha256": "e1c9318caea930eaea55bc0e2d9dcd5d3446b932ecc7721cb6e4134a0e3d0792"+  },+  "generator": "adom-wiki 1.8.24 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "OUT",+      "x": -1.919,+      "y": -0.95,+      "align": "right",+      "vertical": false,+      "h": 0.475+    },+    {+      "pad": "2",+      "text": "GND",+      "x": -1.919,+      "y": 0.0,+      "align": "right",+      "vertical": false,+      "h": 0.475+    },+    {+      "pad": "3",+      "text": "FLG",+      "x": -1.919,+      "y": 0.95,+      "align": "right",+      "vertical": false,+      "h": 0.475+    },+    {+      "pad": "4",+      "text": "EN",+      "x": 1.95,+      "y": 0.95,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "5",+      "text": "IN",+      "x": 1.95,+      "y": -0.95,+      "align": "left",+      "vertical": false,+      "h": 0.6+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -1.1375,+        -0.95+      ],+      "size_mm": [+        1.325,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -1.1375,+        0.0+      ],+      "size_mm": [+        1.325,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -1.1375,+        0.95+      ],+      "size_mm": [+        1.325,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        1.1375,+        0.95+      ],+      "size_mm": [+        1.325,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        1.1375,+        -0.95+      ],+      "size_mm": [+        1.325,+        0.6+      ],+      "rot": 0.0+    }+  ]+}

@@ -1,6 +1,6 @@ {   "slug": "ap22814bw5-7",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Diodes Incorporated AC-DC Controllers and Regulators, SOT-25. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -24,6 +24,123 @@     "docs/hero.png",     "docs/ap22814bw5-7-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"-  ]-}\ No newline at end of file+    "viewers/footprint.html",+    "ap22814bw5-7-etched.step",+    "ap22814bw5-7-etched.glb",+    "ap22814bw5-7-hero.glb",+    "ap22814bw5-7-hero.overlay.json"+  ],+  "component": {+    "mpn": "AP22814BW5-7",+    "manufacturer": "Diodes Incorporated",+    "package": "SOT-25",+    "pin_count": 5,+    "category": "AC-DC Controllers and Regulators",+    "parts": {+      "symbol": "ap22814bw5-7.kicad_sym",+      "footprint": "ap22814bw5-7.kicad_mod",+      "model_3d": "ap22814bw5-7-hero.glb",+      "model_3d_plain": "ap22814bw5-7.glb",+      "model_3d_step": "ap22814bw5-7-etched.step",+      "model_3d_step_plain": "ap22814bw5-7.step",+      "lbr": "ap22814bw5-7.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "OUT",+        "type": "power_out",+        "description": "Switched voltage output pin. Connect a 0.1µF ceramic bypass capacitor plus a high-value bulk capacitor (≥10µF for USB, typ. 100µF/120µF) to GND close to the IC. Delivers up to 3.0A (AP22814) with ~50mΩ typical on-resistance; internally discharged to GND via ~90Ω when the switch is disabled."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference for all internal circuitry. Tie to the system ground plane with a low-impedance connection close to the input and output bypass capacitors."+      },+      {+        "number": "3",+        "name": "FLG",+        "type": "output",+        "description": "Open-drain fault flag output, active low. Asserts after a ~6ms deglitch on over-current or over-temperature conditions and remains asserted until both faults clear. Requires an external pull-up resistor (typ. 10kΩ) to a supply rail; FET on-resistance ≈40Ω (60Ω max) at 10mA, off-leakage ≤1µA."+      },+      {+        "number": "4",+        "name": "EN",+        "type": "input",+        "description": "Enable input (active LOW on the 'B' variant AP22814BW5-7). VIL ≤ 0.65V max drives the switch ON; VIH ≥ 1.5V drives it OFF. GPIO-compatible logic input; must NOT be left floating. Leakage ≤1µA at 0V or 5.5V. Hold in the disabled state while VIN is applied or removed."+      },+      {+        "number": "5",+        "name": "IN",+        "type": "power_in",+        "description": "Main input supply pin, 2.7V to 5.5V operating range (absolute max 6.0V). Connect a 1µF X7R/X5R low-ESR ceramic bypass capacitor to GND close to the IC; add a 10µF or 47µF bulk capacitor for heavy transient loads. UVLO releases at ~2.0V rising with ~180mV hysteresis."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "distributor_links": {+      "lcsc": "C2150207",+      "digikey": "31-AP22814BW5-7TR-ND",+      "mouser": "621-AP22814BW5-7"+    },+    "distributor_check": {+      "checked_at": "2026-10-05T18:52:05Z",+      "source": "Component Ocean /api/assign-pns + lcsc_map",+      "digikey": {+        "pn": "31-AP22814BW5-7TR-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "621-AP22814BW5-7",+        "status": "found"+      }+    },+    "models_3d": [+      {+        "file": "ap22814bw5-7.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ap22814bw5-7-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "683c61b55fd4076a7c395e95328ab52a023823e3c344f354332e9934e9f3f53d",+        "checked": "2026-11-13",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "visibility": "public"+}