component
AP22653AW6-7
Public Made by Adomby adom
Diodes Incorporated AC-DC Controllers and Regulators, SOT-26. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -32,7 +32,7 @@ "number": "1", "name": "IN", "type": "power_in",- "description": "Input supply, 3.0 V to 5.5 V. Source for the internal high-side power MOSFET. Decouple with a 0.1 \u00b5F (or larger) ceramic capacitor from IN to GND placed as close to the IC as possible."+ "description": "Input supply, 3.0 V to 5.5 V. Source for the internal high-side power MOSFET. Decouple with a 0.1 µF (or larger) ceramic capacitor from IN to GND placed as close to the IC as possible." }, { "number": "2",@@ -44,25 +44,25 @@ "number": "3", "name": "EN", "type": "input",- "description": "Active-high enable. Logic high (VIH \u2265 1.5 V) turns on the internal power switch; logic low (VIL \u2264 0.4 V) disables it and activates the output-discharge path. Do not float; drive or pull to a defined level. Absolute-max 6.0 V; input leakage \u00b12 \u00b5A."+ "description": "Active-high enable. Logic high (VIH ≥ 1.5 V) turns on the internal power switch; logic low (VIL ≤ 0.4 V) disables it and activates the output-discharge path. Do not float; drive or pull to a defined level. Absolute-max 6.0 V; input leakage ±2 µA." }, { "number": "4", "name": "FAULT", "type": "output",- "description": "Active-low, open-drain fault flag. Asserted during over-current, over-temperature, or reverse-voltage conditions. 6 ms (typ) blanking time; VOL \u2264 180 mV at IFAULT = 1 mA; maximum continuous sink current 25 mA. Requires an external pull-up resistor (e.g. 10 k\u03a9)."+ "description": "Active-low, open-drain fault flag. Asserted during over-current, over-temperature, or reverse-voltage conditions. 6 ms (typ) blanking time; VOL ≤ 180 mV at IFAULT = 1 mA; maximum continuous sink current 25 mA. Requires an external pull-up resistor (e.g. 10 kΩ)." }, { "number": "5", "name": "ILIM", "type": "input",- "description": "Current-limit set pin. Connect an external resistor RLIM (10 k\u03a9 \u2264 RLIM \u2264 210 k\u03a9) from ILIM to GND to program the DC current limit (approx. 2665 mA at 10 k\u03a9 down to 125 mA at 210 k\u03a9). Maximum source current 1 mA; do not exceed 6.0 V."+ "description": "Current-limit set pin. Connect an external resistor RLIM (10 kΩ ≤ RLIM ≤ 210 kΩ) from ILIM to GND to program the DC current limit (approx. 2665 mA at 10 kΩ down to 125 mA at 210 kΩ). Maximum source current 1 mA; do not exceed 6.0 V." }, { "number": "6", "name": "OUT", "type": "power_out",- "description": "Switched output of the internal high-side MOSFET (RDS(ON) \u2248 65 m\u03a9 typ at 5 V). Connect a 0.1 \u00b5F bypass capacitor and a bulk capacitor (\u226510 \u00b5F, 120 \u00b5F for USB compliance) close to the pin. When disabled, an internal ~600 \u03a9 discharge path pulls OUT toward GND."+ "description": "Switched output of the internal high-side MOSFET (RDS(ON) ≈ 65 mΩ typ at 5 V). Connect a 0.1 µF bypass capacitor and a bulk capacitor (≥10 µF, 120 µF for USB compliance) close to the pin. When disabled, an internal ~600 Ω discharge path pulls OUT toward GND." } ], "provenance": {@@ -126,5 +126,8 @@ "docs/ap22653aw6-7-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }