AP22653AW6-7

@@ -8,13 +8,12 @@ AP22653AW6-7 from Diodes Incorporated, in a SOT-26. Pinout and pin descriptions  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | IN | power_in | Input supply pin, 3.0V to 5.5V. Connect a 0.1uF or greater ceramic bypass capacitor from IN to GND as close to the IC as possible. Absolute max 6.0V. |-| 2 | GND | power_in | Ground reference. Connect to the external exposed pad (and to system ground). |-| 3 | EN | input | Active-high enable input for the AP22653A. Logic high (VIH >= 1.5V) turns the pass-FET on; logic low (VIL <= 0.4V) turns the switch off. Absolute max 6.0V; input leakage +/-2uA. |-| 4 | FAULT | output | Active-low open-drain fault flag. Asserted low during overcurrent, overtemperature, or reverse-voltage conditions after the 6ms deglitch blanking time. Requires an external pull-up (typ. 10k) to a logic rail; max sink current 25mA (10mA recommended). |-| 5 | ILIM | passive | Current-limit programming pin. Connect an external resistor RLIM from ILIM to GND to set the current-limit threshold; recommended range 10k <= RLIM <= 210k, producing typical ILIMIT between 2665mA (10k) and 125mA (210k). Max ILIM source current 1mA. |-| 6 | OUT | power_out | Switched output pin from the internal PMOS pass-FET. Connect a 0.1uF bypass capacitor and a bulk capacitor to GND close to the IC (at least 10uF, 120uF for USB applications per the typical circuit). RDS(on) typ. 65 mOhm at VIN=5V. |-| PAD | EP | power_in | Exposed thermal pad on the bottom of the W-DFN2020-6 package. Internally connected to GND; connect externally to the GND plane for improved power dissipation. Should not be used as the primary electrical ground conduction path. |+| 1 | IN | power_in | Input supply, 3.0 V to 5.5 V. Source for the internal high-side power MOSFET. Decouple with a 0.1 µF (or larger) ceramic capacitor from IN to GND placed as close to the IC as possible. |+| 2 | GND | power_in | Device ground return. Recommended to tie to the exposed pad (on DFN variants) or to a solid ground pour on the PCB. |+| 3 | EN | input | Active-high enable. Logic high (VIH ≥ 1.5 V) turns on the internal power switch; logic low (VIL ≤ 0.4 V) disables it and activates the output-discharge path. Do not float; drive or pull to a defined level. Absolute-max 6.0 V; input leakage ±2 µA. |+| 4 | FAULT | output | Active-low, open-drain fault flag. Asserted during over-current, over-temperature, or reverse-voltage conditions. 6 ms (typ) blanking time; VOL ≤ 180 mV at IFAULT = 1 mA; maximum continuous sink current 25 mA. Requires an external pull-up resistor (e.g. 10 kΩ). |+| 5 | ILIM | input | Current-limit set pin. Connect an external resistor RLIM (10 kΩ ≤ RLIM ≤ 210 kΩ) from ILIM to GND to program the DC current limit (approx. 2665 mA at 10 kΩ down to 125 mA at 210 kΩ). Maximum source current 1 mA; do not exceed 6.0 V. |+| 6 | OUT | power_out | Switched output of the internal high-side MOSFET (RDS(ON) ≈ 65 mΩ typ at 5 V). Connect a 0.1 µF bypass capacitor and a bulk capacitor (≥10 µF, 120 µF for USB compliance) close to the pin. When disabled, an internal ~600 Ω discharge path pulls OUT toward GND. |  ## Key specifications @@ -23,12 +22,12 @@ AP22653AW6-7 from Diodes Incorporated, in a SOT-26. Pinout and pin descriptions | Manufacturer | Diodes Incorporated | | Package | SOT-26 | | Category | PMIC |-| Pins | 7 |+| Pins | 6 |  ## Ordering variants -- `AP22653AW6-7AW6-7`-- `AP22653AW6-7AFDZ-7`+- `AP22653AW6-7W6-7`+- `AP22653AW6-7FDZ-7`  ## CAD (KiCad official) 

@@ -24,7 +24,7 @@       (name "OUT" (effects (font (size 1.27 1.27))))       (number "6" (effects (font (size 1.27 1.27))))     )-    (pin passive line (at 17.78 0.00 180) (length 5.08)+    (pin input line (at 17.78 0.00 180) (length 5.08)       (name "ILIM" (effects (font (size 1.27 1.27))))       (number "5" (effects (font (size 1.27 1.27))))     )

@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Diodes Incorporated AC-DC Controllers and Regulators, SOT-26</description> <packages> <package name="SOT-23-6">   <description>6 pads, 3.6 x 2.5 mm. SOT, 6 Pin</description>@@ -84,6 +84,7 @@ </packages> <symbols> <symbol name="AP22653AW6-7">+  <description>Diodes Incorporated AC-DC Controllers and Regulators, SOT-26</description>   <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="5.08" x2="12.7" y2="-5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>@@ -94,13 +95,13 @@   <pin name="GND" x="-17.78" y="0" length="middle" direction="pwr"/>   <pin name="EN" x="-17.78" y="-2.54" length="middle" direction="in"/>   <pin name="OUT" x="17.78" y="2.54" length="middle" direction="out" rot="R180"/>-  <pin name="ILIM" x="17.78" y="0" length="middle" direction="pas" rot="R180"/>+  <pin name="ILIM" x="17.78" y="0" length="middle" direction="in" rot="R180"/>   <pin name="FAULT" x="17.78" y="-2.54" length="middle" direction="out" rot="R180"/> </symbol> </symbols> <devicesets> <deviceset name="AP22653AW6-7" prefix="U">-  <description></description>+  <description>Diodes Incorporated AC-DC Controllers and Regulators, SOT-26</description>   <gates>     <gate name="G$1" symbol="AP22653AW6-7" x="0" y="0"/>   </gates>@@ -114,7 +115,12 @@         <connect gate="G$1" pin="ILIM" pad="5"/>         <connect gate="G$1" pin="FAULT" pad="4"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="AP22653AW6-7" constant="no"/>+          <attribute name="MANUFACTURER" value="Diodes Incorporated" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>