ap2176sg-13

{
  "slug": "ap2176sg-13",
  "version": "0.1.1",
  "type": "component",
  "description": "Diodes Incorporated AC-DC Controllers and Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "ap2176sg-13"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ap2176sg-13.kicad_sym",
    "ap2176sg-13.kicad_mod",
    "ap2176sg-13.glb",
    "ap2176sg-13.step",
    "ap2176sg-13.lbr",
    "docs/hero.png",
    "docs/ap2176sg-13-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ap2176sg-13-etched.step",
    "ap2176sg-13-etched.glb",
    "ap2176sg-13-hero.glb",
    "ap2176sg-13-hero.overlay.json"
  ],
  "component": {
    "mpn": "AP2176SG-13",
    "manufacturer": "Diodes Incorporated",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "AC-DC Controllers and Regulators",
    "datasheet": "https://www.diodes.com/assets/Datasheets/AP2176SG-13.pdf",
    "parts": {
      "symbol": "ap2176sg-13.kicad_sym",
      "footprint": "ap2176sg-13.kicad_mod",
      "model_3d": "ap2176sg-13-hero.glb",
      "model_3d_plain": "ap2176sg-13.glb",
      "model_3d_step": "ap2176sg-13-etched.step",
      "model_3d_step_plain": "ap2176sg-13.step",
      "lbr": "ap2176sg-13.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "EN1",
        "type": "input",
        "description": "Switch 1 enable input, active high on AP2176. Logic low ≤ 0.8V, logic high ≥ 2V (up to VIN, 6.5V absolute max). Input leakage ≤ 1µA at VEN = 5V."
      },
      {
        "number": "2",
        "name": "FLG1",
        "type": "output",
        "description": "Switch 1 over-current and over-temperature fault report, open-drain. Asserts low after ~7ms deglitch (4-15ms) during fault. Requires an external pull-up (e.g. 10kΩ). RFLG ≈ 20Ω typ (40Ω max) at IFLG = 10mA."
      },
      {
        "number": "3",
        "name": "FLG2",
        "type": "output",
        "description": "Switch 2 over-current and over-temperature fault report, open-drain. Asserts low after ~7ms deglitch during fault. Requires external pull-up. RFLG ≈ 20Ω typ at IFLG = 10mA."
      },
      {
        "number": "4",
        "name": "EN2",
        "type": "input",
        "description": "Switch 2 enable input, active high on AP2176. Logic low ≤ 0.8V, logic high ≥ 2V. Input leakage ≤ 1µA at VEN = 5V."
      },
      {
        "number": "5",
        "name": "OUT2",
        "type": "power_out",
        "description": "Switch 2 voltage output pin. Delivers up to 1.0A recommended continuous load current (1.5A typ current limit) from IN through the internal PMOS switch (RDS(ON) ≈ 100mΩ typ for SO-8 at VIN=5V). Bypass with 0.1µF ceramic and 68µF electrolytic recommended."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference."
      },
      {
        "number": "7",
        "name": "IN",
        "type": "power_in",
        "description": "Voltage input pin (common supply feeding both channels). Operating range 2.7V to 5.5V (6.5V absolute max). UVLO releases at ~1.9V. Recommend 0.01-0.1µF X7R/X5R ceramic close to the pin plus ≥10µF electrolytic bulk."
      },
      {
        "number": "8",
        "name": "OUT1",
        "type": "power_out",
        "description": "Switch 1 voltage output pin. Delivers up to 1.0A recommended continuous load current (1.5A typ current limit). Bypass with 0.1µF ceramic and 68µF electrolytic recommended."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "digikey": "AP2176SGDITR-ND",
      "mouser": "621-AP2176SG-13"
    },
    "distributor_check": {
      "checked_at": "2026-10-05T18:52:01Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": "AP2176SGDITR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "621-AP2176SG-13",
        "status": "found"
      }
    },
    "models_3d": [
      {
        "file": "ap2176sg-13.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ap2176sg-13-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d7f607326544fcf8190cd87fad4cb43bf49c2d0bdcc626529555c9ab8d0061d6",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}