ap2176sg-13

@@ -0,0 +1,260 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "AP2176SG-13",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 8,+      "span_mm": 6.9,+      "dash_mm": 0.1725,+      "gap_mm": 0.1035,+      "pad_stroke_mm": 0.0414+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 7,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 8,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.552,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -3.0,+      3.0,+      -2.11,+      2.11+    ],+    "pads_bbox_mm": [+      -3.45,+      3.45,+      -2.205,+      2.205+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "ap2176sg-13-etched.glb",+    "glb_sha256": "e28be54f01b815b45a618898cbe92fe53f708384511e6afc36267692e5c994be",+    "footprint": "ap2176sg-13.kicad_mod",+    "footprint_sha256": "074ecb2092b24fa4b4b9cdd7c926fc587b0d7d6d21e7341e57935fd42d36894f",+    "pins": "page.json component.pins",+    "pins_sha256": "b41f06e848ee332f2d59a7af4e9be5ff754f2c6a2d5468633c3dfa92fba04e9d"+  },+  "generator": "adom-wiki 1.8.24 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "EN1",+      "x": -3.6,+      "y": -1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "2",+      "text": "FLG1",+      "x": -3.6,+      "y": -0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "3",+      "text": "FLG2",+      "x": -3.6,+      "y": 0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "4",+      "text": "EN2",+      "x": -3.6,+      "y": 1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "5",+      "text": "OUT2",+      "x": 3.6,+      "y": 1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "6",+      "text": "GND",+      "x": 3.6,+      "y": 0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "7",+      "text": "IN",+      "x": 3.6,+      "y": -0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "8",+      "text": "OUT1",+      "x": 3.6,+      "y": -1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        -1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        -0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -2.475,+        1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        -0.635+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        2.475,+        -1.905+      ],+      "size_mm": [+        1.95,+        0.6+      ],+      "rot": 0.0+    }+  ]+}

@@ -1,6 +1,6 @@ {   "slug": "ap2176sg-13",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Diodes Incorporated AC-DC Controllers and Regulators, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -24,6 +24,141 @@     "docs/hero.png",     "docs/ap2176sg-13-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"-  ]-}\ No newline at end of file+    "viewers/footprint.html",+    "ap2176sg-13-etched.step",+    "ap2176sg-13-etched.glb",+    "ap2176sg-13-hero.glb",+    "ap2176sg-13-hero.overlay.json"+  ],+  "component": {+    "mpn": "AP2176SG-13",+    "manufacturer": "Diodes Incorporated",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "AC-DC Controllers and Regulators",+    "datasheet": "https://www.diodes.com/assets/Datasheets/AP2176SG-13.pdf",+    "parts": {+      "symbol": "ap2176sg-13.kicad_sym",+      "footprint": "ap2176sg-13.kicad_mod",+      "model_3d": "ap2176sg-13-hero.glb",+      "model_3d_plain": "ap2176sg-13.glb",+      "model_3d_step": "ap2176sg-13-etched.step",+      "model_3d_step_plain": "ap2176sg-13.step",+      "lbr": "ap2176sg-13.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "EN1",+        "type": "input",+        "description": "Switch 1 enable input, active high on AP2176. Logic low ≤ 0.8V, logic high ≥ 2V (up to VIN, 6.5V absolute max). Input leakage ≤ 1µA at VEN = 5V."+      },+      {+        "number": "2",+        "name": "FLG1",+        "type": "output",+        "description": "Switch 1 over-current and over-temperature fault report, open-drain. Asserts low after ~7ms deglitch (4-15ms) during fault. Requires an external pull-up (e.g. 10kΩ). RFLG ≈ 20Ω typ (40Ω max) at IFLG = 10mA."+      },+      {+        "number": "3",+        "name": "FLG2",+        "type": "output",+        "description": "Switch 2 over-current and over-temperature fault report, open-drain. Asserts low after ~7ms deglitch during fault. Requires external pull-up. RFLG ≈ 20Ω typ at IFLG = 10mA."+      },+      {+        "number": "4",+        "name": "EN2",+        "type": "input",+        "description": "Switch 2 enable input, active high on AP2176. Logic low ≤ 0.8V, logic high ≥ 2V. Input leakage ≤ 1µA at VEN = 5V."+      },+      {+        "number": "5",+        "name": "OUT2",+        "type": "power_out",+        "description": "Switch 2 voltage output pin. Delivers up to 1.0A recommended continuous load current (1.5A typ current limit) from IN through the internal PMOS switch (RDS(ON) ≈ 100mΩ typ for SO-8 at VIN=5V). Bypass with 0.1µF ceramic and 68µF electrolytic recommended."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference."+      },+      {+        "number": "7",+        "name": "IN",+        "type": "power_in",+        "description": "Voltage input pin (common supply feeding both channels). Operating range 2.7V to 5.5V (6.5V absolute max). UVLO releases at ~1.9V. Recommend 0.01-0.1µF X7R/X5R ceramic close to the pin plus ≥10µF electrolytic bulk."+      },+      {+        "number": "8",+        "name": "OUT1",+        "type": "power_out",+        "description": "Switch 1 voltage output pin. Delivers up to 1.0A recommended continuous load current (1.5A typ current limit). Bypass with 0.1µF ceramic and 68µF electrolytic recommended."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "distributor_links": {+      "digikey": "AP2176SGDITR-ND",+      "mouser": "621-AP2176SG-13"+    },+    "distributor_check": {+      "checked_at": "2026-10-05T18:52:01Z",+      "source": "Component Ocean /api/assign-pns + lcsc_map",+      "digikey": {+        "pn": "AP2176SGDITR-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "621-AP2176SG-13",+        "status": "found"+      }+    },+    "models_3d": [+      {+        "file": "ap2176sg-13.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6,+          4.9,+          1.75+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ap2176sg-13-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "d7f607326544fcf8190cd87fad4cb43bf49c2d0bdcc626529555c9ab8d0061d6",+        "checked": "2026-11-13",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "visibility": "public"+}