AP2171DMPG-13

{
  "slug": "ap2171dmpg-13",
  "version": "0.1.0",
  "type": "component",
  "description": "Diodes Incorporated Power Distribution Switches, MSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ap2171dmpg-13",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ap2171dmpg-13.kicad_sym",
    "ap2171dmpg-13.kicad_mod",
    "ap2171dmpg-13.glb",
    "ap2171dmpg-13.step",
    "ap2171dmpg-13.lbr",
    "docs/hero.png",
    "docs/ap2171dmpg-13-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ap2171dmpg-13-hero.glb",
    "ap2171dmpg-13-hero.overlay.json",
    "ap2171dmpg-13-etched.glb"
  ],
  "component": {
    "mpn": "AP2171DMPG-13",
    "manufacturer": "Diodes Incorporated",
    "package": "MSOP-8-EP",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Distribution Switches",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588915047146274816",
    "parts": {
      "symbol": "ap2171dmpg-13.kicad_sym",
      "footprint": "ap2171dmpg-13.kicad_mod",
      "model_3d": "ap2171dmpg-13-hero.glb",
      "model_3d_plain": "ap2171dmpg-13-etched.glb",
      "model_3d_step": "ap2171dmpg-13-etched.step",
      "model_3d_step_plain": "ap2171dmpg-13.step",
      "lbr": "ap2171dmpg-13.lbr"
    },
    "distributor_links": {
      "lcsc": "C674407"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T09:25:08Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; the exposed pad must be connected to GND for thermal impedance but must not be used as the electrical ground conduction path."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "power_in",
        "description": "Voltage input pin, input voltage range 2.7V to 5.5V (absolute maximum 6.5V); all IN pins must be tied together externally."
      },
      {
        "number": "3",
        "name": "IN",
        "type": "power_in",
        "description": "Voltage input pin, input voltage range 2.7V to 5.5V (absolute maximum 6.5V); all IN pins must be tied together externally."
      },
      {
        "number": "4",
        "name": "EN",
        "type": "input",
        "description": "Enable input, active low on AP2161D and active high on AP2171D; logic low maximum 0.8V and logic high minimum 2V."
      },
      {
        "number": "5",
        "name": "FLG",
        "type": "output",
        "description": "Over-current and over-temperature fault report; open-drain output that is active low when triggered, with a 7ms typical blanking time before assertion."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "power_out",
        "description": "Voltage output pin, recommended maximum continuous load current 1A; all OUT pins must be tied together externally."
      },
      {
        "number": "7",
        "name": "OUT",
        "type": "power_out",
        "description": "Voltage output pin, recommended maximum continuous load current 1A; all OUT pins must be tied together externally."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; the datasheet recommends tying this pin to the OUT pins."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MSOP-8EP exposed pad is not given a pin number in the datasheet pin table and is therefore not l; Pin 8 (NC) is listed as 'No internal connection; recommend tie to OUT pins' in the MSOP-8 / MSOP-8EP; Package variant confirmed: ordering table on page 12 maps suffix MP to MSOP-8EP, so AP2171DMPG-13 is",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 19,
        "cost_usd": 0.0777,
        "at": "2026-10-18T09:22:26"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588915047146274816",
        "pages": 19,
        "sha256": "efd0e89766d0b027",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ap2171dmpg-13.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.96
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "43252be3beac8fd30ca9bfeb82a613fa01d5dffff9b22810c13a4655daafb5ee",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ap2171dmpg-13-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.96
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "322be6762d96f1f458190aec60cc86e444ac7f21db09079bbc69a92e70e95f5b",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}