main
Ray
Publish 0.1.0
c79e7d3
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284
{
"slug": "al1792afe-13",
"version": "0.1.0",
"type": "component",
"description": "Diodes Incorporated LED Drivers, UDFN-14-EP(4x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"display modules - led drivers - display drivers",
"al1792afe-13",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"al1792afe-13.kicad_sym",
"al1792afe-13.kicad_mod",
"al1792afe-13.glb",
"al1792afe-13.step",
"al1792afe-13.lbr",
"docs/hero.png",
"docs/al1792afe-13-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"al1792afe-13-hero.glb",
"al1792afe-13-hero.overlay.json"
],
"component": {
"mpn": "AL1792AFE-13",
"manufacturer": "Diodes Incorporated",
"package": "UDFN-14-EP(4x3)",
"pin_count": 15,
"category": "Display Modules / LED Drivers / Display Drivers",
"subcategory": "LED Drivers",
"datasheet": "https://www.diodes.com/assets/Datasheets/AL1792AFE-13.pdf",
"parts": {
"symbol": "al1792afe-13.kicad_sym",
"footprint": "al1792afe-13.kicad_mod",
"model_3d": "al1792afe-13-hero.glb",
"model_3d_plain": "al1792afe-13.glb",
"model_3d_step": "al1792afe-13-etched.step",
"model_3d_step_plain": "al1792afe-13.step",
"lbr": "al1792afe-13.lbr"
},
"distributor_links": {
"lcsc": "C2678881",
"digikey": "AL1792AFE-13DITR-ND",
"mouser": "621-AL1792AFE-13"
},
"distributor_check": {
"checked_at": "2026-11-13T05:32:43Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "AL1792AFE-13DITR-ND",
"status": "found"
},
"mouser": {
"pn": "621-AL1792AFE-13",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "EN",
"type": "input",
"description": "Active-high enable, internally pulled down; the device is enabled when EN is above about 2.5 V and disabled when it is below 0.4 V."
},
{
"number": "2",
"name": "GND",
"type": "power_in",
"description": "Ground on the AL1792 (printed as PWM4/GND; PWM4 is only used on the AL1794)."
},
{
"number": "3",
"name": "GND",
"type": "power_in",
"description": "Ground on the AL1792 (printed as PWM3/GND; PWM3 is only used on the AL1793 and AL1794)."
},
{
"number": "4",
"name": "PWM2",
"type": "input",
"description": "PWM signal input for channel 2 on the AL1792, internally pulled down; logic high needs at least 2.5 V and logic low is 0.4 V or below."
},
{
"number": "5",
"name": "PWM1",
"type": "input",
"description": "PWM signal input for channel 1, internally pulled down; tie to GND when channel 1 is not used."
},
{
"number": "6",
"name": "LED1",
"type": "output",
"description": "Channel 1 LED cathode and current-sink output; recommended maximum channel current is 0.5 A for the AL1792."
},
{
"number": "7",
"name": "LED2",
"type": "output",
"description": "Channel 2 LED cathode and current-sink output on the AL1792; recommended maximum channel current is 0.5 A."
},
{
"number": "8",
"name": "GND",
"type": "power_in",
"description": "Ground."
},
{
"number": "9",
"name": "GND",
"type": "power_in",
"description": "Ground on the AL1792 (printed as LED3/GND; LED3 is only used on the AL1793 and AL1794)."
},
{
"number": "10",
"name": "GND",
"type": "power_in",
"description": "Ground on the AL1792 (printed as LED4/GND; LED4 is only used on the AL1794)."
},
{
"number": "11",
"name": "LEDPG",
"type": "output",
"description": "LED power-good output, asserted low to report insufficient LED headroom; it needs an external pull-up resistor."
},
{
"number": "12",
"name": "FAULTB",
"type": "output",
"description": "Open-drain fault report output, asserted low for UVLO, over-temperature, LED open or LED short; it needs an external pull-up resistor."
},
{
"number": "13",
"name": "REF",
"type": "passive",
"description": "Reference current setting pin; an external RSET resistor sets the channel currents (VREF typically 1.5 V)."
},
{
"number": "14",
"name": "VIN",
"type": "power_in",
"description": "Voltage input, 6.5 V to 30 V recommended operating range with 30 V absolute maximum."
},
{
"number": "15",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet lists an exposed pad ('Exposed PAD', internally connected to GND) but does not give it; Pins 2, 3, 9 and 10 are printed as dual-function labels (for example PWM4/GND, LED3/GND). The AL1792; The datasheet covers AL1791/1792/1793/1794 together in one document. The AL1792AFE-13 ordering line ",
"exposed pad 15 added from the footprint"
],
"pages_sent": 18,
"cost_usd": 0.0229,
"at": "2026-11-13T05:32:31"
},
"datasheet": {
"url": "https://www.diodes.com/assets/Datasheets/AL1792AFE-13.pdf",
"pages": 18,
"sha256": "b00e0b817e901edf",
"source_tier": "mfr"
},
"cad": "land: KiCad official (CC-BY-SA 4.0); 3D: generated from the datasheet",
"model_3d_generated": {
"generator": "factory/gen_pkg3d.py",
"family": "QFN",
"height_mm": 0.6,
"height_basis": "datasheet A, nominal",
"standoff_mm": 0.0
},
"pins": {
"total": 15,
"described": 15,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "al1792afe-13.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.02,
4.0,
0.6
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "05ca030b9668fe3850f387e9852c965b65e2bb0e0fd1c4215cb614d5a9cb2158",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "al1792afe-13-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.02,
4.0,
0.6
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "72851ec1af964aeb9c760f9eb57af0c4d9267592ac3cfd500605251ff0260a6b",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "U-DFN4030-14",
"source_page": 16,
"D": {
"nom_mm": 4.0,
"range_mm": [
3.95,
4.05
]
},
"E1": {
"nom_mm": 3.0,
"range_mm": [
2.95,
3.05
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 0.6,
"range_mm": [
0.55,
0.65
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "al1792afe-13.step",
"verdict": "PASS",
"reasons": [
"height within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}