main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers al1792afe-13: viewers rendered from the public page · Ray
al1792afe-13-etched.glb al1792afe-13: factory component page (tier=mfr) · Ray
al1792afe-13-etched.step al1792afe-13: factory component page (tier=mfr) · Ray
al1792afe-13-hero.glb al1792afe-13: hero GLB from the etched model (keeps the MPN mark) · Ray
al1792afe-13-hero.overlay.json al1792afe-13: hero GLB from the etched model (keeps the MPN mark) · Ray
al1792afe-13.glb Publish 0.1.0 · Ray
al1792afe-13.kicad_mod Publish 0.1.0 · Ray
al1792afe-13.kicad_sym Publish 0.1.0 · Ray
al1792afe-13.lbr Publish 0.1.0 · Ray
al1792afe-13.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 15 pins · Ray

AL1792AFE-13

Diodes Incorporated · LED Drivers · UDFN-14-EP(4x3)

AL1792AFE-13 from Diodes Incorporated, in a UDFN-14-EP(4x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 EN input Active-high enable, internally pulled down; the device is enabled when EN is above about 2.5 V and disabled when it is below 0.4 V.
2 GND power_in Ground on the AL1792 (printed as PWM4/GND; PWM4 is only used on the AL1794).
3 GND power_in Ground on the AL1792 (printed as PWM3/GND; PWM3 is only used on the AL1793 and AL1794).
4 PWM2 input PWM signal input for channel 2 on the AL1792, internally pulled down; logic high needs at least 2.5 V and logic low is 0.4 V or below.
5 PWM1 input PWM signal input for channel 1, internally pulled down; tie to GND when channel 1 is not used.
6 LED1 output Channel 1 LED cathode and current-sink output; recommended maximum channel current is 0.5 A for the AL1792.
7 LED2 output Channel 2 LED cathode and current-sink output on the AL1792; recommended maximum channel current is 0.5 A.
8 GND power_in Ground.
9 GND power_in Ground on the AL1792 (printed as LED3/GND; LED3 is only used on the AL1793 and AL1794).
10 GND power_in Ground on the AL1792 (printed as LED4/GND; LED4 is only used on the AL1794).
11 LEDPG output LED power-good output, asserted low to report insufficient LED headroom; it needs an external pull-up resistor.
12 FAULTB output Open-drain fault report output, asserted low for UVLO, over-temperature, LED open or LED short; it needs an external pull-up resistor.
13 REF passive Reference current setting pin; an external RSET resistor sets the channel currents (VREF typically 1.5 V).
14 VIN power_in Voltage input, 6.5 V to 30 V recommended operating range with 30 V absolute maximum.
15 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package UDFN-14-EP(4x3)
Category Display Modules / LED Drivers / Display Drivers
Pins 15

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage VIN 30 V TA=+25°C 7
Enable Voltage, PWM Voltage VEN, VPWMx 7 V TA=+25°C 7
Maximum Junction Temperature TJ(MAX) 160 °C 7
Storage Temperature Range TST -65 150 °C 7
Input voltage at VIN VIN 6.5 30 V 7
Operating Ambient Temperature TA -40 125 °C 7
High-Level Input Voltage on EN and PWMx VIH 2.5 5.5 V 7
Low-Level Input Voltage on EN and PWMx VIL 0 0.4 V 7
EN Low Voltage VIL(EN) 0 0.4 V 8
EN High Voltage VIH(EN) 2.5 V 8
EN Internal Pulldown I(EN-PD) 0.35 3.5 μA VEN=5V 8
Digital PWM Low Voltage VIL(PWMx) 0.3 V 8
Digital PWM High Voltage VIH(PWMx) 2.5 V 8
Digital PWM Frequency FPWMx 0.5 4 KHz 8
PWM Internal Pulldown I(PWMx-PD) 0.35 3.5 μA VEN=5V 8
Reference Voltage VREF 1.47 1.5 1.53 V 8
LEDx Leakage Current ILED_LEAK 0.1 2 μA VPWMx=0V, VLEDx=+12V 8
LED Current Accuracy ILED_ACCURACY -4 4 % RSET=12KΩ 8
FAULTB Output Low Voltage VFOL 180 mV IFAULTB=1mA 8
FAULTB Leakage Current IFOH 1 μA VFAULTB=6V 8
UVLO Voltage VUVLO 6.3 V VIN Rising 8
UVLO Hysteresis VUVHYS 300 mV VIN Falling 8
Shutdown Supply Current ISHDN 10 µA Disabled 8
Quiescent Supply Current IQ 2 mA Enabled, LEDx floating, PWMx are "L", RSET is 12KΩ 8
Regulation Current for Channel 1 ILED1_NOM 250 mA RSET=12KΩ 8
Regulation Current for Channel 2 ILED2_NOM 250 mA RSET=12KΩ 8
Minimum LED Regulation Voltage VLED_REG 250 mV ILED1=250mA 8
Thermal Shutdown Threshold TSHDN 160 °C RSET=12KΩ 8
Thermal Resistance Junction-to-Ambient θJA 55 °C/W U-DFN4030-14 (Note 5) 8
Thermal Resistance Junction-to-Case θJC 12 °C/W U-DFN4030-14 (Note 5) 8

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: AL1792AFE-13
  • Footprint: Package_DFN_QFN:DFN-14-1EP_3x4mm_P0.5mm_EP1.7x3.3mm
  • 3D model: UDFN-14-EP(4x3), generated on the KiCad land (body 3 x 4 mm, terminals on the pads, 0.6 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: al1792afe-13-etched.step / al1792afe-13-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); al1792afe-13.step / al1792afe-13.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (18 pp, sha256 b00e0b817e901edf, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF