main
Ray
Publish 0.1.0
6084604
AIC1747-15GV5TR
AIC(Analog Integrations) · Linear Voltage Regulators (LDO) · SOT-25
AIC1747-15GV5TR from AIC(Analog Integrations), in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power supply input pin (2.0V to 6.0V operating range, 7V absolute maximum); bypass with a 1µF capacitor to GND. |
| 2 | GND | power_in | Ground pin; connect to a large pad or ground plane to channel heat away. |
| 3 | EN | input | Active-high enable input; output on above 1.2V, off below 0.4V, 7V absolute maximum. |
| 4 | BP | passive | Noise bypass pin; connect an external 0.1nF capacitor to GND to reduce output noise (7V absolute maximum). |
| 5 | VOUT | power_out | Regulator output pin that sources up to 300mA; 1µF output capacitor recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AIC(Analog Integrations) |
| Package | SOT-25 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 2 | 6 | V | Note 2 | 6 | |
| Output Voltage Tolerance | VOUT | -2 | 2 | % | VIN=6V, IOUT = 1mA | 6 | |
| Quiescent Current | IQ | 80 | 110 | µA | VEN ≧1.2V, IOUT = 0 mA | 6 | |
| Standby Current | ISTBY | 0.01 | 0.5 | µA | VEN= 0 | 6 | |
| Output Current Limit | IIL | 330 | 450 | 600 | mA | VIN=5V, RLOAD = 1Ω | 6 |
| Line Regulation | VLIR | 3 | 10 | mV | VIN = VOUT + 1V to 6V | 6 | |
| Load Regulation | VLOR | 5 | 20 | mV | IOUT = 1mA to 300mA | 6 | |
| Enable Pin Current | IEN | 0 | 100 | nA | VEN = VIN or GND | 6 | |
| Enable Input Threshold High | VENH | 1.2 | V | Output ON, VIN = 2V to 6V | 6 | ||
| Enable Input Threshold Low | VENL | 0.4 | V | Output OFF, VIN = 2V to 6V | 6 | ||
| Continuous Output Current | IOUT | 300 | mA | 6 | |||
| GND Pin Current | IGND | 80 | µA | IOUT = 300mA | 6 | ||
| Ripple Rejection 1kHz | PSRR | -60 | dB | f=1KHz, Ripple=0.5Vp-p | 6 | ||
| Ripple Rejection 10kHz | PSRR | -55 | dB | f=10KHz, Ripple=0.5Vp-p | 6 | ||
| Temperature Coefficient | TC | 50 | ppm/℃ | 6 | |||
| Thermal Shutdown Temperature | TSD | 150 | ℃ | VIN = VOUT + 1V | 6 | ||
| Thermal Shutdown Hysteresis | TSD | 20 | ℃ | 6 | |||
| Shutdown Exit Delay Time | t | 50 | µs | IOUT = 30mA | 6 | ||
| Max Output Discharge Resistance to GND during Shutdown | RDSON_CLMP | 700 | Ω | 6 | |||
| Shutdown Time | 30 | µs | 6 | ||||
| Maximum Junction Temperature | TJ | 150 | ºC | 5 | |||
| Operating Temperature Range | TA | -40 | 85 | ºC | 5 | ||
| Storage Temperature Range | TSTG | -65 | 150 | ºC | 5 | ||
| Lead Temperature (Soldering, 10 sec) | 260 | ºC | 10 sec | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
AIC1747-15GV5TR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
aic1747-15gv5tr-etched.step/aic1747-15gv5tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);aic1747-15gv5tr.step/aic1747-15gv5tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: AIC(Analog Integrations) datasheet (22 pp, sha256
8f697226897ad6ab, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# AIC1747-15GV5TR
**AIC(Analog Integrations)** · Linear Voltage Regulators (LDO) · SOT-25
AIC1747-15GV5TR from AIC(Analog Integrations), in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power supply input pin (2.0V to 6.0V operating range, 7V absolute maximum); bypass with a 1µF capacitor to GND. |
| 2 | GND | power_in | Ground pin; connect to a large pad or ground plane to channel heat away. |
| 3 | EN | input | Active-high enable input; output on above 1.2V, off below 0.4V, 7V absolute maximum. |
| 4 | BP | passive | Noise bypass pin; connect an external 0.1nF capacitor to GND to reduce output noise (7V absolute maximum). |
| 5 | VOUT | power_out | Regulator output pin that sources up to 300mA; 1µF output capacitor recommended. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AIC(Analog Integrations) |
| Package | SOT-25 |
| Category | Power Management ICs |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 2 | | 6 | V | Note 2 | 6 |
| Output Voltage Tolerance | VOUT | -2 | | 2 | % | VIN=6V, IOUT = 1mA | 6 |
| Quiescent Current | IQ | | 80 | 110 | µA | VEN ≧1.2V, IOUT = 0 mA | 6 |
| Standby Current | ISTBY | | 0.01 | 0.5 | µA | VEN= 0 | 6 |
| Output Current Limit | IIL | 330 | 450 | 600 | mA | VIN=5V, RLOAD = 1Ω | 6 |
| Line Regulation | VLIR | | 3 | 10 | mV | VIN = VOUT + 1V to 6V | 6 |
| Load Regulation | VLOR | | 5 | 20 | mV | IOUT = 1mA to 300mA | 6 |
| Enable Pin Current | IEN | 0 | | 100 | nA | VEN = VIN or GND | 6 |
| Enable Input Threshold High | VENH | 1.2 | | | V | Output ON, VIN = 2V to 6V | 6 |
| Enable Input Threshold Low | VENL | | | 0.4 | V | Output OFF, VIN = 2V to 6V | 6 |
| Continuous Output Current | IOUT | 300 | | | mA | | 6 |
| GND Pin Current | IGND | | 80 | | µA | IOUT = 300mA | 6 |
| Ripple Rejection 1kHz | PSRR | | -60 | | dB | f=1KHz, Ripple=0.5Vp-p | 6 |
| Ripple Rejection 10kHz | PSRR | | -55 | | dB | f=10KHz, Ripple=0.5Vp-p | 6 |
| Temperature Coefficient | TC | | 50 | | ppm/℃ | | 6 |
| Thermal Shutdown Temperature | TSD | | 150 | | ℃ | VIN = VOUT + 1V | 6 |
| Thermal Shutdown Hysteresis | TSD | | 20 | | ℃ | | 6 |
| Shutdown Exit Delay Time | t | | 50 | | µs | IOUT = 30mA | 6 |
| Max Output Discharge Resistance to GND during Shutdown | RDSON_CLMP | | 700 | | Ω | | 6 |
| Shutdown Time | | | 30 | | µs | | 6 |
| Maximum Junction Temperature | TJ | | | 150 | ºC | | 5 |
| Operating Temperature Range | TA | -40 | | 85 | ºC | | 5 |
| Storage Temperature Range | TSTG | -65 | | 150 | ºC | | 5 |
| Lead Temperature (Soldering, 10 sec) | | | | 260 | ºC | 10 sec | 5 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `AIC1747-15GV5TR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-25, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `aic1747-15gv5tr-etched.step` / `aic1747-15gv5tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `aic1747-15gv5tr.step` / `aic1747-15gv5tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [AIC(Analog Integrations) datasheet](docs/aic1747-15gv5tr-datasheet.pdf) (22 pp, sha256 `8f697226897ad6ab`, retrieved 2026-11-13, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/aic1747-15gv5tr-datasheet.pdf)