main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers aic1747-15gv5tr: viewers rendered from the public page · Ray
aic1747-15gv5tr-etched.glb aic1747-15gv5tr: factory component page (tier=lcsc) · Ray
aic1747-15gv5tr-etched.step aic1747-15gv5tr: factory component page (tier=lcsc) · Ray
aic1747-15gv5tr-hero.glb aic1747-15gv5tr: hero GLB from the etched model (keeps the MPN mark) · Ray
aic1747-15gv5tr-hero.overlay.json aic1747-15gv5tr: hero GLB from the etched model (keeps the MPN mark) · Ray
aic1747-15gv5tr.glb Publish 0.1.0 · Ray
aic1747-15gv5tr.kicad_mod Publish 0.1.0 · Ray
aic1747-15gv5tr.kicad_sym Publish 0.1.0 · Ray
aic1747-15gv5tr.lbr Publish 0.1.0 · Ray
aic1747-15gv5tr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 5 pins · Ray

AIC1747-15GV5TR

AIC(Analog Integrations) · Linear Voltage Regulators (LDO) · SOT-25

AIC1747-15GV5TR from AIC(Analog Integrations), in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Power supply input pin (2.0V to 6.0V operating range, 7V absolute maximum); bypass with a 1µF capacitor to GND.
2 GND power_in Ground pin; connect to a large pad or ground plane to channel heat away.
3 EN input Active-high enable input; output on above 1.2V, off below 0.4V, 7V absolute maximum.
4 BP passive Noise bypass pin; connect an external 0.1nF capacitor to GND to reduce output noise (7V absolute maximum).
5 VOUT power_out Regulator output pin that sources up to 300mA; 1µF output capacitor recommended.

Key specifications

Parameter Value
Manufacturer AIC(Analog Integrations)
Package SOT-25
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage VIN 2 6 V Note 2 6
Output Voltage Tolerance VOUT -2 2 % VIN=6V, IOUT = 1mA 6
Quiescent Current IQ 80 110 µA VEN ≧1.2V, IOUT = 0 mA 6
Standby Current ISTBY 0.01 0.5 µA VEN= 0 6
Output Current Limit IIL 330 450 600 mA VIN=5V, RLOAD = 1Ω 6
Line Regulation VLIR 3 10 mV VIN = VOUT + 1V to 6V 6
Load Regulation VLOR 5 20 mV IOUT = 1mA to 300mA 6
Enable Pin Current IEN 0 100 nA VEN = VIN or GND 6
Enable Input Threshold High VENH 1.2 V Output ON, VIN = 2V to 6V 6
Enable Input Threshold Low VENL 0.4 V Output OFF, VIN = 2V to 6V 6
Continuous Output Current IOUT 300 mA 6
GND Pin Current IGND 80 µA IOUT = 300mA 6
Ripple Rejection 1kHz PSRR -60 dB f=1KHz, Ripple=0.5Vp-p 6
Ripple Rejection 10kHz PSRR -55 dB f=10KHz, Ripple=0.5Vp-p 6
Temperature Coefficient TC 50 ppm/℃ 6
Thermal Shutdown Temperature TSD 150 ℃ VIN = VOUT + 1V 6
Thermal Shutdown Hysteresis TSD 20 ℃ 6
Shutdown Exit Delay Time t 50 µs IOUT = 30mA 6
Max Output Discharge Resistance to GND during Shutdown RDSON_CLMP 700 Ω 6
Shutdown Time 30 µs 6
Maximum Junction Temperature TJ 150 ºC 5
Operating Temperature Range TA -40 85 ºC 5
Storage Temperature Range TSTG -65 150 ºC 5
Lead Temperature (Soldering, 10 sec) 260 ºC 10 sec 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: AIC1747-15GV5TR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-25, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: aic1747-15gv5tr-etched.step / aic1747-15gv5tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); aic1747-15gv5tr.step / aic1747-15gv5tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: AIC(Analog Integrations) datasheet (22 pp, sha256 8f697226897ad6ab, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF