main
History Download
Ray Publish 0.1.0 bb0f3d7

ADUM6201ARWZ-RL

Analog Devices · Digital Isolators · SOIC-16-300mil

ADUM6201ARWZ-RL from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD1 power_in Primary supply voltage, specified from 3.0 V to 5.5 V.
2 GND1 power_in Primary-side ground reference; pin 2 and pin 8 are internally connected and should both be tied to a common ground.
3 VIA input Logic Input A on the primary side; input thresholds are 0.7 × VDD1 (logic high) and 0.3 × VDD1 (logic low).
4 VOB output Logic Output B on the primary side; with 4 mA load the datasheet specifies VOH of at least VDD1 − 0.5 V and VOL of at most 0.4 V.
5 RCIN input Regulation control input that must be connected to the RCOUT pin of a master isoPower device or tied low, and must not be tied high while RCSEL is low.
6 RCSEL input Selects self-regulation mode (high) or slave mode (low); the pin is weakly pulled high and should be tied high or low in noisy environments.
7 VE1 input Primary data enable input; when high or unconnected the primary output is active, and when low the output is high-Z.
8 GND1 power_in Primary-side ground reference; internally connected to pin 2 and should be tied to a common ground with it.
9 GNDISO power_in Secondary-side ground reference; internally connected to pin 15 and should be tied to a common ground with it.
10 VE2 input Secondary data enable input; when high or unconnected the secondary output is active, and when low the output is high-Z.
11 VSEL input Output voltage selection: VSEL = VISO sets the VISO setpoint to 5.0 V, VSEL = GNDISO sets it to 3.3 V, and it has no function in slave regulation mode.
12 NC unconnected No internal connection.
13 VIB input Logic Input B on the secondary side; input thresholds are 0.7 × VISO (logic high) and 0.3 × VISO (logic low).
14 VOA output Logic Output A on the secondary side; with 4 mA load the datasheet specifies VOH of at least VISO − 0.5 V and VOL of at most 0.4 V.
15 GNDISO power_in Secondary-side ground reference; internally connected to pin 9 and should be tied to a common ground with it.
16 VISO power_out Regulated secondary supply output (5.0 V or 3.3 V per VSEL) for the secondary isolated data channels and external loads.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOIC-16-300mil
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltages (VDD1, VISO) absolute maximum VDD1, VISO -0.5 7 V Each voltage relative to its respective ground 10
Average Output Current per Pin -10 10 mA 10
Common-Mode Transients -100 100 kV/µs Across the isolation barrier 10
Storage Temperature TST -55 150 °C 10
Ambient Operating Temperature (absolute maximum) TA -40 105 °C 10
Operating Temperature (recommended) TA -40 105 °C Operation at 105°C requires reduction of maximum load current per Table 19 9
VDD1 supply voltage @ VSEL = 0 V (recommended) VDD1 3 5.5 V VSEL = 0 V 9
VDD1 supply voltage @ VSEL = VISO (recommended) VDD1 4.5 5.5 V VSEL = VISO 9
5 V/5 V DC-to-DC setpoint VISO 4.7 5 5.4 V IISO = 0 mA 3
5 V/5 V line regulation VISO(LINE) 1 mV/V IISO = 40 mA, VDD1 = 4.5 V to 5.5 V 3
5 V/5 V load regulation VISO(LOAD) 1 5 % IISO = 8 mA to 72 mA 3
5 V/5 V output ripple VISO(RIP) 75 mV p-p 20 MHz bandwidth, CBO = 0.1 µF//10 µF, IISO = 72 mA 3
5 V/5 V output noise VISO(NOISE) 200 mV p-p CBO = 0.1 µF//10 µF, IISO = 72 mA 3
5 V/5 V output supply current IISO(MAX) 80 mA VISO > 4.5 V 3
5 V/5 V IDD1 no VISO load (quiescent) IDD1(Q) 10 26 mA 3
5 V/5 V IDD1 full VISO load IDD1(MAX) 290 mA 3
5 V/5 V switching frequency fOSC 180 MHz 3
5 V/5 V PWM frequency fPWM 625 kHz 3
5 V/5 V propagation delay, A grade tPHL, tPLH 55 100 ns 50% input to 50% output 3
5 V/5 V pulse width, A grade PW 1000 ns Within PWD limit 3
5 V/5 V pulse width distortion, A grade PWD 40 ns /tPLH − tPHL/ 3
5 V/5 V propagation delay skew, A grade tPSK 50 ns Between any two units 3
5 V/5 V codirectional channel matching, A grade tPSKCD 50 ns 3
3.3 V/3.3 V DC-to-DC setpoint VISO 3 3.3 3.6 V IISO = 0 mA 4
3.3 V/3.3 V line regulation VISO(LINE) 1 mV/V IISO = 20 mA, VDD1 = 3.0 V to 3.6 V 4
3.3 V/3.3 V load regulation VISO(LOAD) 1 5 % IISO = 4 mA to 36 mA 4
3.3 V/3.3 V output ripple VISO(RIP) 50 mV p-p 20 MHz bandwidth, CBO = 0.1 µF//10 µF, IISO = 36 mA 4
3.3 V/3.3 V output noise VISO(NOISE) 130 mV p-p CBO = 0.1 µF//10 µF, IISO = 36 mA 4
3.3 V/3.3 V output supply current IISO(MAX) 40 mA VISO > 3 V 4
3.3 V/3.3 V IDD1 no VISO load (quiescent) IDD1(Q) 10 17 mA 4
3.3 V/3.3 V IDD1 full VISO load IDD1(MAX) 175 mA 4
3.3 V/3.3 V propagation delay, A grade tPHL, tPLH 60 100 ns 50% input to 50% output 5
3.3 V/3.3 V pulse width, A grade PW 1000 ns Within PWD limit 5
3.3 V/3.3 V pulse width distortion, A grade PWD 40 ns /tPLH − tPHL/ 5
3.3 V/3.3 V propagation delay skew, A grade tPSK 50 ns Between any two units 5
3.3 V/3.3 V codirectional channel matching, A grade tPSKCD 50 ns 5
5 V/3.3 V DC-to-DC setpoint VISO 3 3.3 3.6 V IISO = 0 mA 6
5 V/3.3 V line regulation VISO(LINE) 1 mV/V IISO = 50 mA, VDD1 = 3.0 V to 3.6 V 6
5 V/3.3 V load regulation VISO(LOAD) 1 5 % IISO = 6 mA to 54 mA 6
5 V/3.3 V output ripple VISO(RIP) 50 mV p-p 20 MHz bandwidth, CBO = 0.1 µF//10 µF, IISO = 90 mA 6
5 V/3.3 V output noise VISO(NOISE) 130 mV p-p CBO = 0.1 µF//10 µF, IISO = 90 mA 6
5 V/3.3 V output supply current IISO(MAX) 100 mA VISO > 3 V 6
5 V/3.3 V IDD1 no VISO load (quiescent) IDD1(Q) 7 13 mA 6
5 V/3.3 V IDD1 full VISO load IDD1(MAX) 230 mA 6
5 V/3.3 V propagation delay, A grade tPHL, tPLH 60 100 ns 50% input to 50% output 6
5 V/3.3 V pulse width, A grade PW 1000 ns Within PWD limit 6
5 V/3.3 V pulse width distortion, A grade PWD 40 ns /tPLH − tPHL/ 6
5 V/3.3 V propagation delay skew, A grade tPSK 50 ns Between any two units 6
5 V/3.3 V codirectional channel matching, A grade tPSKCD 50 ns 6
Input current per channel II -20 0.01 20 µA 0 V ≤ VIx ≤ VDD1 4
Common-mode transient immunity /CM/ 25 35 kV/µs VIx = VDD1 or VISO, VCM = 1000 V, transient magnitude = 800 V 4
Rise/fall time (10% to 90%) tR/tF 2.5 ns 10% to 90% 4
Undervoltage lockout positive-going threshold VUV+ 2.7 V VDD1, VISO supplies 4
Undervoltage lockout negative-going threshold VUV− 2.4 V VDD1, VISO supplies 4
Undervoltage lockout hysteresis VUVH 0.3 V VDD1, VISO supplies 4
IC junction-to-ambient thermal resistance θJA 45 °C/W Thermocouple at center of package underside; 4-layer board with thin traces 7

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing pC In accordance with IEC 60747-5-2 (VDE 0884 Part 2):2003-01, each ADuM6200/ADuM6201/ADuM6202 in the RW-16 package is proof-tested by applying an insulation test voltage ≥ 1590 V peak for 1 sec (partial 8

CAD (KiCad official)

  • Symbol: ADUM6201ARWZ-RL
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: adum6201arwz-etched.step / adum6201arwz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adum6201arwz.step / adum6201arwz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (28 pp, sha256 2ae02d2bb1920d49, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF