3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownADUM6201ARWZ-RL
Analog Devices · Digital Isolators · SOIC-16-300mil
ADUM6201ARWZ-RL from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | Primary supply voltage, specified from 3.0 V to 5.5 V. |
| 2 | GND1 | power_in | Primary-side ground reference; pin 2 and pin 8 are internally connected and should both be tied to a common ground. |
| 3 | VIA | input | Logic Input A on the primary side; input thresholds are 0.7 × VDD1 (logic high) and 0.3 × VDD1 (logic low). |
| 4 | VOB | output | Logic Output B on the primary side; with 4 mA load the datasheet specifies VOH of at least VDD1 − 0.5 V and VOL of at most 0.4 V. |
| 5 | RCIN | input | Regulation control input that must be connected to the RCOUT pin of a master isoPower device or tied low, and must not be tied high while RCSEL is low. |
| 6 | RCSEL | input | Selects self-regulation mode (high) or slave mode (low); the pin is weakly pulled high and should be tied high or low in noisy environments. |
| 7 | VE1 | input | Primary data enable input; when high or unconnected the primary output is active, and when low the output is high-Z. |
| 8 | GND1 | power_in | Primary-side ground reference; internally connected to pin 2 and should be tied to a common ground with it. |
| 9 | GNDISO | power_in | Secondary-side ground reference; internally connected to pin 15 and should be tied to a common ground with it. |
| 10 | VE2 | input | Secondary data enable input; when high or unconnected the secondary output is active, and when low the output is high-Z. |
| 11 | VSEL | input | Output voltage selection: VSEL = VISO sets the VISO setpoint to 5.0 V, VSEL = GNDISO sets it to 3.3 V, and it has no function in slave regulation mode. |
| 12 | NC | unconnected | No internal connection. |
| 13 | VIB | input | Logic Input B on the secondary side; input thresholds are 0.7 × VISO (logic high) and 0.3 × VISO (logic low). |
| 14 | VOA | output | Logic Output A on the secondary side; with 4 mA load the datasheet specifies VOH of at least VISO − 0.5 V and VOL of at most 0.4 V. |
| 15 | GNDISO | power_in | Secondary-side ground reference; internally connected to pin 9 and should be tied to a common ground with it. |
| 16 | VISO | power_out | Regulated secondary supply output (5.0 V or 3.3 V per VSEL) for the secondary isolated data channels and external loads. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-16-300mil |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltages (VDD1, VISO) absolute maximum | VDD1, VISO | -0.5 | 7 | V | Each voltage relative to its respective ground | 10 | |
| Average Output Current per Pin | -10 | 10 | mA | 10 | |||
| Common-Mode Transients | -100 | 100 | kV/µs | Across the isolation barrier | 10 | ||
| Storage Temperature | TST | -55 | 150 | °C | 10 | ||
| Ambient Operating Temperature (absolute maximum) | TA | -40 | 105 | °C | 10 | ||
| Operating Temperature (recommended) | TA | -40 | 105 | °C | Operation at 105°C requires reduction of maximum load current per Table 19 | 9 | |
| VDD1 supply voltage @ VSEL = 0 V (recommended) | VDD1 | 3 | 5.5 | V | VSEL = 0 V | 9 | |
| VDD1 supply voltage @ VSEL = VISO (recommended) | VDD1 | 4.5 | 5.5 | V | VSEL = VISO | 9 | |
| 5 V/5 V DC-to-DC setpoint | VISO | 4.7 | 5 | 5.4 | V | IISO = 0 mA | 3 |
| 5 V/5 V line regulation | VISO(LINE) | 1 | mV/V | IISO = 40 mA, VDD1 = 4.5 V to 5.5 V | 3 | ||
| 5 V/5 V load regulation | VISO(LOAD) | 1 | 5 | % | IISO = 8 mA to 72 mA | 3 | |
| 5 V/5 V output ripple | VISO(RIP) | 75 | mV p-p | 20 MHz bandwidth, CBO = 0.1 µF//10 µF, IISO = 72 mA | 3 | ||
| 5 V/5 V output noise | VISO(NOISE) | 200 | mV p-p | CBO = 0.1 µF//10 µF, IISO = 72 mA | 3 | ||
| 5 V/5 V output supply current | IISO(MAX) | 80 | mA | VISO > 4.5 V | 3 | ||
| 5 V/5 V IDD1 no VISO load (quiescent) | IDD1(Q) | 10 | 26 | mA | 3 | ||
| 5 V/5 V IDD1 full VISO load | IDD1(MAX) | 290 | mA | 3 | |||
| 5 V/5 V switching frequency | fOSC | 180 | MHz | 3 | |||
| 5 V/5 V PWM frequency | fPWM | 625 | kHz | 3 | |||
| 5 V/5 V propagation delay, A grade | tPHL, tPLH | 55 | 100 | ns | 50% input to 50% output | 3 | |
| 5 V/5 V pulse width, A grade | PW | 1000 | ns | Within PWD limit | 3 | ||
| 5 V/5 V pulse width distortion, A grade | PWD | 40 | ns | /tPLH − tPHL/ | 3 | ||
| 5 V/5 V propagation delay skew, A grade | tPSK | 50 | ns | Between any two units | 3 | ||
| 5 V/5 V codirectional channel matching, A grade | tPSKCD | 50 | ns | 3 | |||
| 3.3 V/3.3 V DC-to-DC setpoint | VISO | 3 | 3.3 | 3.6 | V | IISO = 0 mA | 4 |
| 3.3 V/3.3 V line regulation | VISO(LINE) | 1 | mV/V | IISO = 20 mA, VDD1 = 3.0 V to 3.6 V | 4 | ||
| 3.3 V/3.3 V load regulation | VISO(LOAD) | 1 | 5 | % | IISO = 4 mA to 36 mA | 4 | |
| 3.3 V/3.3 V output ripple | VISO(RIP) | 50 | mV p-p | 20 MHz bandwidth, CBO = 0.1 µF//10 µF, IISO = 36 mA | 4 | ||
| 3.3 V/3.3 V output noise | VISO(NOISE) | 130 | mV p-p | CBO = 0.1 µF//10 µF, IISO = 36 mA | 4 | ||
| 3.3 V/3.3 V output supply current | IISO(MAX) | 40 | mA | VISO > 3 V | 4 | ||
| 3.3 V/3.3 V IDD1 no VISO load (quiescent) | IDD1(Q) | 10 | 17 | mA | 4 | ||
| 3.3 V/3.3 V IDD1 full VISO load | IDD1(MAX) | 175 | mA | 4 | |||
| 3.3 V/3.3 V propagation delay, A grade | tPHL, tPLH | 60 | 100 | ns | 50% input to 50% output | 5 | |
| 3.3 V/3.3 V pulse width, A grade | PW | 1000 | ns | Within PWD limit | 5 | ||
| 3.3 V/3.3 V pulse width distortion, A grade | PWD | 40 | ns | /tPLH − tPHL/ | 5 | ||
| 3.3 V/3.3 V propagation delay skew, A grade | tPSK | 50 | ns | Between any two units | 5 | ||
| 3.3 V/3.3 V codirectional channel matching, A grade | tPSKCD | 50 | ns | 5 | |||
| 5 V/3.3 V DC-to-DC setpoint | VISO | 3 | 3.3 | 3.6 | V | IISO = 0 mA | 6 |
| 5 V/3.3 V line regulation | VISO(LINE) | 1 | mV/V | IISO = 50 mA, VDD1 = 3.0 V to 3.6 V | 6 | ||
| 5 V/3.3 V load regulation | VISO(LOAD) | 1 | 5 | % | IISO = 6 mA to 54 mA | 6 | |
| 5 V/3.3 V output ripple | VISO(RIP) | 50 | mV p-p | 20 MHz bandwidth, CBO = 0.1 µF//10 µF, IISO = 90 mA | 6 | ||
| 5 V/3.3 V output noise | VISO(NOISE) | 130 | mV p-p | CBO = 0.1 µF//10 µF, IISO = 90 mA | 6 | ||
| 5 V/3.3 V output supply current | IISO(MAX) | 100 | mA | VISO > 3 V | 6 | ||
| 5 V/3.3 V IDD1 no VISO load (quiescent) | IDD1(Q) | 7 | 13 | mA | 6 | ||
| 5 V/3.3 V IDD1 full VISO load | IDD1(MAX) | 230 | mA | 6 | |||
| 5 V/3.3 V propagation delay, A grade | tPHL, tPLH | 60 | 100 | ns | 50% input to 50% output | 6 | |
| 5 V/3.3 V pulse width, A grade | PW | 1000 | ns | Within PWD limit | 6 | ||
| 5 V/3.3 V pulse width distortion, A grade | PWD | 40 | ns | /tPLH − tPHL/ | 6 | ||
| 5 V/3.3 V propagation delay skew, A grade | tPSK | 50 | ns | Between any two units | 6 | ||
| 5 V/3.3 V codirectional channel matching, A grade | tPSKCD | 50 | ns | 6 | |||
| Input current per channel | II | -20 | 0.01 | 20 | µA | 0 V ≤ VIx ≤ VDD1 | 4 |
| Common-mode transient immunity | /CM/ | 25 | 35 | kV/µs | VIx = VDD1 or VISO, VCM = 1000 V, transient magnitude = 800 V | 4 | |
| Rise/fall time (10% to 90%) | tR/tF | 2.5 | ns | 10% to 90% | 4 | ||
| Undervoltage lockout positive-going threshold | VUV+ | 2.7 | V | VDD1, VISO supplies | 4 | ||
| Undervoltage lockout negative-going threshold | VUV− | 2.4 | V | VDD1, VISO supplies | 4 | ||
| Undervoltage lockout hysteresis | VUVH | 0.3 | V | VDD1, VISO supplies | 4 | ||
| IC junction-to-ambient thermal resistance | θJA | 45 | °C/W | Thermocouple at center of package underside; 4-layer board with thin traces | 7 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | pC | In accordance with IEC 60747-5-2 (VDE 0884 Part 2):2003-01, each ADuM6200/ADuM6201/ADuM6202 in the RW-16 package is proof-tested by applying an insulation test voltage ≥ 1590 V peak for 1 sec (partial | 8 |
CAD (KiCad official)
- Symbol:
ADUM6201ARWZ-RL - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
adum6201arwz-etched.step/adum6201arwz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adum6201arwz.step/adum6201arwz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (28 pp, sha256
2ae02d2bb1920d49, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).