ADUM5010ARSZ

{
  "slug": "adum5010arsz",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Converters, SSOP-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "adum5010arsz",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adum5010arsz.kicad_sym",
    "adum5010arsz.kicad_mod",
    "adum5010arsz.glb",
    "adum5010arsz.step",
    "adum5010arsz.lbr",
    "docs/hero.png",
    "docs/adum5010arsz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adum5010arsz-hero.glb",
    "adum5010arsz-hero.overlay.json",
    "adum5010arsz-etched.glb"
  ],
  "component": {
    "mpn": "ADUM5010ARSZ",
    "manufacturer": "Analog Devices",
    "package": "SSOP-20-208mil",
    "pin_count": 20,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM5010.pdf",
    "parts": {
      "symbol": "adum5010arsz.kicad_sym",
      "footprint": "adum5010arsz.kicad_mod",
      "model_3d": "adum5010arsz-hero.glb",
      "model_3d_plain": "adum5010arsz-etched.glb",
      "model_3d_step": "adum5010arsz-etched.step",
      "model_3d_step_plain": "adum5010arsz.step",
      "lbr": "adum5010arsz.lbr"
    },
    "distributor_links": {
      "lcsc": "C661048",
      "digikey": "505-ADUM5010ARSZ-ND",
      "mouser": "584-ADUM5010ARSZ"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T22:33:16Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-ADUM5010ARSZ-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-ADUM5010ARSZ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "This pin is not connected internally and is not used."
      },
      {
        "number": "2",
        "name": "GNDP",
        "type": "power_in",
        "description": "Ground 1 is the ground reference for the isolator primary; Pin 2 and Pin 10 are internally connected, and all GNDP pins should be connected to a common ground."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "This pin is not connected internally and is not used."
      },
      {
        "number": "4",
        "name": "NC",
        "type": "unconnected",
        "description": "This pin is not connected internally and is not used."
      },
      {
        "number": "5",
        "name": "GNDP",
        "type": "power_in",
        "description": "Ground 1 is the ground reference for the isolator primary; this pin should be connected to the common ground."
      },
      {
        "number": "6",
        "name": "GNDP",
        "type": "power_in",
        "description": "Ground 1 is the ground reference for the isolator primary; this pin should be connected to the common ground."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "This pin is not connected internally and is not used."
      },
      {
        "number": "8",
        "name": "PDIS",
        "type": "input",
        "description": "Power Disable: tying this pin to GNDP enables the power converter, while a logic high voltage puts the power supply into low-power standby mode."
      },
      {
        "number": "9",
        "name": "VDDP",
        "type": "power_in",
        "description": "Primary supply voltage input, specified at 3.0 V to 5.5 V."
      },
      {
        "number": "10",
        "name": "GNDP",
        "type": "power_in",
        "description": "Ground 1 is the ground reference for the isolator primary; Pin 10 and Pin 2 are internally connected, and all GNDP pins should be connected to a common ground."
      },
      {
        "number": "11",
        "name": "GNDISO",
        "type": "power_in",
        "description": "Ground reference for isolator side 2; Pin 11 and Pin 19 are internally connected, and all GNDISO pins should be connected to a common ground."
      },
      {
        "number": "12",
        "name": "VISO",
        "type": "power_out",
        "description": "Secondary supply voltage output for external loads, 3.15 V to 5.5 V depending on the voltage divider connected to VSEL."
      },
      {
        "number": "13",
        "name": "VSEL",
        "type": "input",
        "description": "Output voltage select input: a voltage divider between VISO and GNDISO sets VISO per Equation 1, with input voltage limited to -0.5 V to VDD + 0.5 V per the absolute maximum ratings."
      },
      {
        "number": "14",
        "name": "NC",
        "type": "unconnected",
        "description": "This pin is not connected internally and is not used."
      },
      {
        "number": "15",
        "name": "GNDISO",
        "type": "power_in",
        "description": "Ground reference for isolator side 2; this pin should be connected to the common ground."
      },
      {
        "number": "16",
        "name": "GNDISO",
        "type": "power_in",
        "description": "Ground reference for isolator side 2; this pin should be connected to the common ground."
      },
      {
        "number": "17",
        "name": "NC",
        "type": "unconnected",
        "description": "This pin is not connected internally and is not used."
      },
      {
        "number": "18",
        "name": "NC",
        "type": "unconnected",
        "description": "This pin is not connected internally and is not used."
      },
      {
        "number": "19",
        "name": "GNDISO",
        "type": "power_in",
        "description": "Ground reference for isolator side 2; Pin 19 and Pin 11 are internally connected, and all GNDISO pins should be connected to a common ground."
      },
      {
        "number": "20",
        "name": "NC",
        "type": "unconnected",
        "description": "This pin is not connected internally and is not used."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Figure 3 (Pin Configuration) is an image and its physical pin layout is not in the extracted text. P; The ordering guide lists ADuM5010ARSZ in the RS-20 20-Lead SSOP package, which matches the requested; Table 15 gives NC pins 1, 3, 4, 7, 14, 17, 18, and 20 as not connected internally. The datasheet rec"
        ],
        "pages_sent": 15,
        "cost_usd": 0.0725,
        "at": "2026-10-28T22:32:56"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM5010.pdf",
        "pages": 15,
        "sha256": "9998f1a895087c9b",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adum5010arsz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          7.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c9a01a276d0b4d9561efd58f2fcee56f52c1b6ab464ea7a0380cab4e87a924e6",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adum5010arsz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          7.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e554fbb1420486a345942b3b5cb4fbaad895386c8f32a81780a6b7548c802b9d",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}