← Commit history
README.md+29−54
@@ -2,28 +2,28 @@  **Analog Devices** · DC-DC Converters · SOIC-16-300mil -ADUM5000WARWZ from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+ADUM5000WARWZ from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VDD1 | power_in | Primary supply voltage, specified as 3.0 V to 5.5 V in Table 12; pins 1 and 7 are internally connected and both should be externally tied to a common power source. |-| 2 | GND1 | power_in | Ground reference for the primary side of the converter; pins 2 and 8 are internally connected and both should be connected to a common ground. |+| 1 | VDD1 | power_in | Primary supply voltage of 3.0 V to 5.5 V; pin 1 is internally connected to pin 7 and both should be externally connected to a common power source. |+| 2 | GND1 | power_in | Ground 1, the ground reference for the primary side of the converter; pin 2 is internally connected to pin 8 and both should be connected to a common ground. | | 3 | NC | unconnected | No internal connection. |-| 4 | RCIN | input | Regulation control input: in slave mode (RCSEL low) it connects to a master RCOUT or is tied low to disable the converter; it is weakly pulled low and must not be tied high while RCSEL is low. |-| 5 | RCOUT | output | Regulation control output: in master configuration it connects to the RCIN pin of a slave isoPower device to allow regulation of additional devices. |-| 6 | RCSEL | input | Selects self-regulating master mode (high) or slave mode (low); it is weakly pulled high and should be tied high or low in noisy environments. |-| 7 | VDD1 | power_in | Primary supply voltage, specified as 3.0 V to 5.5 V in Table 12; internally connected to pin 1 and both pins should be externally tied to a common power source. |-| 8 | GND1 | power_in | Ground reference for the primary side of the converter; internally connected to pin 2 and both pins should be connected to a common ground. |-| 9 | GNDISO | power_in | Ground reference for the secondary side of the converter; pins 9 and 15 are internally connected and both should be connected to a common ground. |-| 10 | VISO | power_out | Secondary supply output for external loads, 3.3 V (VSEL low) or 5.0 V (VSEL high), with 5.0 V not guaranteed for a 3.3 V primary input; pins 10 and 16 are internally connected and connecting both is recommended. |+| 4 | RCIN | input | Regulation control input: in slave mode (RCSEL low) it is connected to a master RCOUT or tied low to disable the converter, it is weakly pulled low, and it must not be tied high while RCSEL is low. |+| 5 | RCOUT | output | Regulation control output: in master configuration it is connected to the RCIN pin of a slave isoPower device to allow regulation of additional devices. |+| 6 | RCSEL | input | Control input that selects self-regulating master mode (high) or slave mode (low); it is weakly pulled high and should be tied high or low in noisy environments. |+| 7 | VDD1 | power_in | Primary supply voltage of 3.0 V to 5.5 V; internally connected to pin 1 and should be externally connected to the same power source. |+| 8 | GND1 | power_in | Ground 1, the primary-side ground reference; internally connected to pin 2 and should be connected to a common ground. |+| 9 | GNDISO | power_in | Ground reference for the secondary side of the converter; internally connected to pin 15 and should be connected to a common ground. |+| 10 | VISO | power_out | Secondary supply output for external loads at 3.3 V (VSEL low) or 5.0 V (VSEL high); 5.0 V output is not guaranteed with a 3.3 V primary input, and it is internally connected to pin 16. | | 11 | NC | unconnected | No internal connection. | | 12 | NC | unconnected | No internal connection. |-| 13 | VSEL | input | Output voltage select: the VISO setpoint is 5.0 V when VSEL = VISO and 3.3 V when VSEL = GNDISO; it is weakly pulled high, should be tied high or low in noisy environments, and has no function in slave regulation mode. |+| 13 | VSEL | input | Output voltage selection: VISO setpoint is 5.0 V when VSEL = VISO and 3.3 V when VSEL = GNDISO; it is weakly pulled high and should be tied high or low in noisy environments. | | 14 | NC | unconnected | No internal connection. |-| 15 | GNDISO | power_in | Ground reference for the secondary side of the converter; internally connected to pin 9 and both pins should be connected to a common ground. |-| 16 | VISO | power_out | Secondary supply output for external loads, 3.3 V (VSEL low) or 5.0 V (VSEL high); internally connected to pin 10 and connecting both externally is recommended. |+| 15 | GNDISO | power_in | Ground reference for the secondary side of the converter; internally connected to pin 9 and should be connected to a common ground. |+| 16 | VISO | power_out | Secondary supply output for external loads at 3.3 V or 5.0 V as selected by VSEL; internally connected to pin 10 and connecting both externally is recommended. |  ## Key specifications @@ -40,50 +40,25 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|+| Setpoint, 5 V primary / 5 V secondary | VISO | 4.7 | 5 | 5.4 | V | IISO = 0 mA | 3 |+| Load Regulation, 5 V primary / 5 V secondary | VISO(LOAD) |  | 1 | 5 | % | IISO = 8 mA to 72 mA | 3 |+| IDD1 Supply Current, No VISO Load, 5 V primary / 5 V secondary | IDD1(Q) |  | 4 | 15 | mA | IISO = 0 mA | 3 |+| Setpoint, 3.3 V primary / 3.3 V secondary | VISO | 3 | 3.3 | 3.6 | V | IISO = 0 mA | 3 |+| Load Regulation, 3.3 V primary / 3.3 V secondary | VISO(LOAD) |  | 1 | 5 | % | IISO = 4 mA to 36 mA | 3 |+| IDD1 Supply Current, No VISO Load, 3.3 V primary / 3.3 V secondary | IDD1(Q) |  | 3 | 12 | mA | IISO = 0 mA | 3 |+| Setpoint, 5 V primary / 3.3 V secondary | VISO | 3 | 3.3 | 3.6 | V | IISO = 0 mA | 4 |+| Load Regulation, 5 V primary / 3.3 V secondary | VISO(LOAD) |  | 1 | 5 | % | IISO = 10 mA to 100 mA | 4 |+| IDD1 Supply Current, No VISO Load, 5 V primary / 3.3 V secondary | IDD1(Q) |  | 3 | 12 | mA | IISO = 0 mA | 4 |+| Supply Voltage VDD1 (primary) | VDD1 | 2.7 |  | 5.5 | V | VSEL = 0 V | 6 |+| Supply Voltage VDD1 (primary) | VDD1 | 4.5 |  | 5.5 | V | VSEL = 5 V | 6 | | Operating Temperature | TA | -40 |  | 105 | °C |  | 6 |-| Supply Voltage VDD1 at VSEL = 0 V | VDD1 | 2.7 |  | 5.5 | V |  | 6 |-| Supply Voltage VDD1 at VSEL = 5 V | VDD1 | 4.5 |  | 5.5 | V |  | 6 | | Storage Temperature | TST | -55 |  | 150 | °C |  | 7 | | Ambient Operating Temperature | TA | -40 |  | 105 | °C |  | 7 |-| Supply Voltages (VDDx, VISO) | VDDx, VISO | -0.5 |  | 7 | V | Each voltage relative to its respective ground | 7 |-| Input Voltage (RCSEL, RCIN, VSEL); max printed as VDDI + 0.5 V |  | -0.5 |  |  | V | Each voltage relative to its respective ground | 7 |-| Output Voltage (RCOUT); max printed as VDDO + 0.5 V |  | -0.5 |  |  | V | Each voltage relative to its respective ground | 7 |+| Supply Voltages | VDDx, VISO | -0.5 |  | 7 | V | each voltage relative to its respective ground | 7 |+| Input Voltage (RCSEL, RCIN, VSEL) | VIN | -0.5 |  |  | V |  | 7 |+| Output Voltage (RCOUT) | VOUT | -0.5 |  |  | V |  | 7 | | Average Total Output Current | IISO |  |  | 100 | mA |  | 7 |-| Common-Mode Transients |  | -100 |  | 100 | kV/µs | Across the isolation barrier | 7 |-| IC Junction-to-Ambient Thermal Resistance | θJA |  | 45 |  | °C/W | Thermocouple at package underside center; 4-layer board with thin traces | 5 |-| Thermal Shutdown Threshold | TSSD |  | 150 |  | °C | TJ rising | 5 |-| Thermal Shutdown Hysteresis | TSSD-HYS |  | 20 |  | °C |  | 5 |-| Capacitance (Input-to-Output) | CI-O |  | 2.2 |  | pF | f = 1 MHz | 5 |-| Input Capacitance | CI |  | 4 |  | pF |  | 5 |-| Setpoint VISO (5 V primary / 5 V secondary configuration) | VISO | 4.7 | 5 | 5.4 | V | IISO = 0 mA | 3 |-| Load Regulation VISO(LOAD) (5 V / 5 V configuration) | VISO(LOAD) |  | 1 | 5 | % | IISO = 8 mA to 72 mA | 3 |-| Maximum Output Supply Current (5 V / 5 V configuration) | IISO(MAX) |  | 80 |  | mA | VISO > 4.5 V | 3 |-| IDD1 Supply Current, Full VISO Load (5 V / 5 V configuration) | IDD1(MAX) |  | 290 |  | mA | IISO = 80 mA | 3 |-| IDD1 Supply Current, No VISO Load (5 V / 5 V configuration) | IDD1(Q) |  | 4 | 15 | mA | IISO = 0 mA | 3 |-| Setpoint VISO (3.3 V primary / 3.3 V secondary configuration) | VISO | 3 | 3.3 | 3.6 | V | IISO = 0 mA | 3 |-| Load Regulation VISO(LOAD) (3.3 V / 3.3 V configuration) | VISO(LOAD) |  | 1 | 5 | % | IISO = 4 mA to 36 mA | 3 |-| Maximum Output Supply Current (3.3 V / 3.3 V configuration) | IISO(MAX) |  | 40 |  | mA | VISO > 3.0 V | 3 |-| IDD1 Supply Current, Full VISO Load (3.3 V / 3.3 V configuration) | IDD1(MAX) |  | 175 |  | mA | IISO = 40 mA | 3 |-| IDD1 Supply Current, No VISO Load (3.3 V / 3.3 V configuration) | IDD1(Q) |  | 3 | 12 | mA | IISO = 0 mA | 3 |-| Setpoint VISO (5 V primary / 3.3 V secondary configuration) | VISO | 3 | 3.3 | 3.6 | V | IISO = 0 mA | 4 |-| Load Regulation VISO(LOAD) (5 V / 3.3 V configuration) | VISO(LOAD) |  | 1 | 5 | % | IISO = 10 mA to 100 mA | 4 |-| Maximum Output Supply Current (5 V / 3.3 V configuration) | IISO(MAX) |  | 100 |  | mA | VISO > 3.0 V | 4 |-| IDD1 Supply Current, Full VISO Load (5 V / 3.3 V configuration) | IDD1(MAX) |  | 250 |  | mA | IISO = 100 mA | 4 |-| IDD1 Supply Current, No VISO Load (5 V / 3.3 V configuration) | IDD1(Q) |  | 3 | 12 | mA | IISO = 0 mA | 4 |-| Line Regulation VISO(LINE) (5 V / 5 V configuration) | VISO(LINE) |  | 1 |  | mV/V | IISO = 40 mA, VDD1 = 4.5 V to 5.5 V | 3 |-| Line Regulation VISO(LINE) (3.3 V / 3.3 V configuration) | VISO(LINE) |  | 1 |  | mV/V | IISO = 20 mA, VDD1 = 3.0 V to 3.6 V | 3 |-| Line Regulation VISO(LINE) (5 V / 3.3 V configuration) | VISO(LINE) |  | 1 |  | mV/V | IISO = 50 mA, VDD1 = 4.5 V to 5.5 V | 4 |-| Output Ripple VISO(RIP) (5 V / 5 V configuration) | VISO(RIP) |  | 75 |  | mV p-p | 20 MHz bandwidth, CBO = 0.1 µF//10 µF, IISO = 72 mA | 3 |-| Output Ripple VISO(RIP) (3.3 V / 3.3 V configuration) | VISO(RIP) |  | 50 |  | mV p-p | 20 MHz bandwidth, CBO = 0.1 μF//10 μF, IISO = 36 mA | 3 |-| Output Ripple VISO(RIP) (5 V / 3.3 V configuration) | VISO(RIP) |  | 50 |  | mV p-p | 20 MHz bandwidth, CBO = 0.1 μF//10 μF, IISO = 90 mA | 4 |-| Output Noise VISO(N) (5 V / 5 V configuration) | VISO(N) |  | 200 |  | mV p-p | CBO = 0.1 μF//10 μF, IISO = 72 mA | 3 |-| Output Noise VISO(N) (3.3 V / 3.3 V configuration) | VISO(N) |  | 130 |  | mV p-p | CBO = 0.1 μF//10 μF, IISO = 36 mA | 3 |-| Output Noise VISO(N) (5 V / 3.3 V configuration) | VISO(N) |  | 130 |  | mV p-p | CBO = 0.1 μF//10 μF, IISO = 90 mA | 4 |-| Undervoltage Lockout Positive Going Threshold VUV+ | VUV+ |  | 2.7 |  | V |  | 3 |-| Undervoltage Lockout Negative Going Threshold VUV− | VUV− |  | 2.4 |  | V |  | 3 |-| Undervoltage Lockout Hysteresis | VUVH |  | 0.3 |  | V |  | 3 |-| Switching Frequency | fOSC |  | 180 |  | MHz |  | 3 |-| PWM Frequency | fPWM |  | 625 |  | kHz |  | 3 |+| Common-Mode Transients |  | -100 |  | 100 | kV/µs | across the isolation barrier | 7 |  ## CAD (KiCad official) @@ -96,7 +71,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM5000W.pdf) (15 pp, sha256 `5197f63a91ac6d0d`, retrieved 2026-11-06, tier: manufacturer)+- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM5000W.pdf) (15 pp, sha256 `5197f63a91ac6d0d`, retrieved 2026-11-13, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
adum5000warwz-hero.glb
⋯ 1 unchanged line ⋯
adum5000warwz-hero.overlay.json+434−439
@@ -1,441 +1,436 @@ {- "spec": "adom-hero 1.4",- "mpn": "ADUM5000WARWZ-RL",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {-  "pad_outlines": {-   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-   "rgba": [-    0.0,-    0.902,-    0.863,-    0.5-   ],-   "pads": 16,-   "span_mm": 11.35,-   "dash_mm": 0.2838,-   "gap_mm": 0.1703,-   "pad_stroke_mm": 0.0681-  },-  "silkscreen": {-   "material": "Silkscreen reference lines - 30 percent opacity",-   "rgba": [-    0.92,-    0.96,-    1.0,-    0.3-   ],-   "footprint_items": 7,-   "pin1": {-    "source": "footprint silkscreen",-    "pad": "1"-   }-  },-  "signal_names": {-   "material": "Signal names - 50 percent opacity",-   "rgba": [-    0.92,-    0.96,-    1.0,-    0.5-   ],-   "font": "DejaVu Sans Mono",-   "labels": 16,-   "sides": "top + mirrored underside (single-sided)",-   "omitted": null,-   "fallback_to_pad_number": 0-  }- },- "align": {-  "ok": true,-  "board_underside": true,-  "electrical_pads_without_contact": [],-  "mounting_pads_left_out": [],-  "centre_offset_mm": 0.0,-  "over_pads": true,-  "tolerance_mm": 0.908,-  "orientation_flipped": false,-  "contacts_bbox_mm": [-   -5.15,-   5.15,-   -4.65,-   4.65-  ],-  "pads_bbox_mm": [-   -5.675,-   5.675,-   -4.745,-   4.745+  "spec": "adom-hero 1.4",+  "mpn": "ADUM5000WARWZ",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 16,+      "span_mm": 11.35,+      "dash_mm": 0.2838,+      "gap_mm": 0.1703,+      "pad_stroke_mm": 0.0681+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 7,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 16,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.908,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -5.15,+      5.15,+      -4.65,+      4.65+    ],+    "pads_bbox_mm": [+      -5.675,+      5.675,+      -4.745,+      4.745+    ],+    "seating_z_mm": -0.0+  },+  "sources": {+    "glb": "adum5000warwz-etched.glb",+    "glb_sha256": "3abe8dbd375fb245af0d40dd3be79ffff1fc294cd1febf7dc696cdc1acdc8276",+    "footprint": "adum5000warwz.kicad_mod",+    "footprint_sha256": "07aa02ced9fcdc61d7c6bb5ea1b86803731041e9e171db91a991c3daa7817383",+    "pins": "page.json component.pins",+    "pins_sha256": "412b4d27fcc525d1f51a7fe64138e9a169d2247c5aacf82f2108e5b84b014882"+  },+  "generator": "adom-wiki 1.8.24 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "VDD1",+      "x": -5.825,+      "y": -4.445,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "2",+      "text": "GND1",+      "x": -5.825,+      "y": -3.175,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "3",+      "text": "NC",+      "x": -5.825,+      "y": -1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "4",+      "text": "RCIN",+      "x": -5.825,+      "y": -0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "5",+      "text": "RCOUT",+      "x": -5.825,+      "y": 0.635,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "6",+      "text": "RCSEL",+      "x": -5.825,+      "y": 1.905,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "7",+      "text": "VDD1",+      "x": -5.825,+      "y": 3.175,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "8",+      "text": "GND1",+      "x": -5.825,+      "y": 4.445,+      "align": "right",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "9",+      "text": "GNDISO",+      "x": 5.825,+      "y": 4.445,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "10",+      "text": "VISO",+      "x": 5.825,+      "y": 3.175,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "11",+      "text": "NC",+      "x": 5.825,+      "y": 1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "12",+      "text": "NC",+      "x": 5.825,+      "y": 0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "13",+      "text": "VSEL",+      "x": 5.825,+      "y": -0.635,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "14",+      "text": "NC",+      "x": 5.825,+      "y": -1.905,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "15",+      "text": "GNDISO",+      "x": 5.825,+      "y": -3.175,+      "align": "left",+      "vertical": false,+      "h": 0.6+    },+    {+      "pad": "16",+      "text": "VISO",+      "x": 5.825,+      "y": -4.445,+      "align": "left",+      "vertical": false,+      "h": 0.6+    }   ],-  "seating_z_mm": -0.0- },- "sources": {-  "glb": "adum5000warwz-etched.glb",-  "glb_sha256": "68296c3e05983b69103691e88e49e73708c50b201f4e55fe8d3628517d94dd75",-  "footprint": "adum5000warwz.kicad_mod",-  "footprint_sha256": "07aa02ced9fcdc61d7c6bb5ea1b86803731041e9e171db91a991c3daa7817383",-  "pins": "page.json component.pins",-  "pins_sha256": "412b4d27fcc525d1f51a7fe64138e9a169d2247c5aacf82f2108e5b84b014882"- },- "generator": "factory/hero_glb.py",- "labels": [-  {-   "pad": "1",-   "text": "VDD1",-   "x": -5.825,-   "y": -4.445,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "2",-   "text": "GND1",-   "x": -5.825,-   "y": -3.175,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "3",-   "text": "NC",-   "x": -5.825,-   "y": -1.905,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "4",-   "text": "RCIN",-   "x": -5.825,-   "y": -0.635,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "5",-   "text": "RCOUT",-   "x": -5.825,-   "y": 0.635,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "6",-   "text": "RCSEL",-   "x": -5.825,-   "y": 1.905,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "7",-   "text": "VDD1",-   "x": -5.825,-   "y": 3.175,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "8",-   "text": "GND1",-   "x": -5.825,-   "y": 4.445,-   "align": "right",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "9",-   "text": "GNDISO",-   "x": 5.825,-   "y": 4.445,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "10",-   "text": "VISO",-   "x": 5.825,-   "y": 3.175,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "11",-   "text": "NC",-   "x": 5.825,-   "y": 1.905,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "12",-   "text": "NC",-   "x": 5.825,-   "y": 0.635,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "13",-   "text": "VSEL",-   "x": 5.825,-   "y": -0.635,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "14",-   "text": "NC",-   "x": 5.825,-   "y": -1.905,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "15",-   "text": "GNDISO",-   "x": 5.825,-   "y": -3.175,-   "align": "left",-   "vertical": false,-   "h": 0.6-  },-  {-   "pad": "16",-   "text": "VISO",-   "x": 5.825,-   "y": -4.445,-   "align": "left",-   "vertical": false,-   "h": 0.6-  }- ],- "pads": [-  {-   "number": "1",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -4.445-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "2",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -3.175-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "3",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -1.905-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "4",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    -0.635-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "5",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    0.635-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "6",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    1.905-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "7",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    3.175-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "8",-   "shape": "roundrect",-   "center_mm": [-    -4.65,-    4.445-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "9",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    4.445-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "10",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    3.175-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "11",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    1.905-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "12",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    0.635-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "13",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -0.635-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "14",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -1.905-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "15",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -3.175-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  },-  {-   "number": "16",-   "shape": "roundrect",-   "center_mm": [-    4.65,-    -4.445-   ],-   "size_mm": [-    2.05,-    0.6-   ],-   "rot": 0.0-  }- ]-}\ No newline at end of file+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        -0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -4.65,+        4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -0.635+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -1.905+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -3.175+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        4.65,+        -4.445+      ],+      "size_mm": [+        2.05,+        0.6+      ],+      "rot": 0.0+    }+  ]+}
adum5000warwz.kicad_sym+4−4
@@ -1,13 +1,13 @@ (kicad_symbol_lib (version 20211014) (generator ds2sf_rect)-  (symbol "ADUM5000WARWZ-RL" (in_bom yes) (on_board yes)+  (symbol "ADUM5000WARWZ" (in_bom yes) (on_board yes)     (property "Reference" "U" (at 0 12.70 0) (effects (font (size 1.27 1.27))))-    (property "Value" "ADUM5000WARWZ-RL" (at 0 -15.24 0) (effects (font (size 1.27 1.27))))+    (property "Value" "ADUM5000WARWZ" (at 0 -15.24 0) (effects (font (size 1.27 1.27))))     (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))-    (symbol "ADUM5000WARWZ-RL_0_1"+    (symbol "ADUM5000WARWZ_0_1"     (rectangle (start -12.70 10.16) (end 12.70 -12.70)       (stroke (width 0.254) (type default)) (fill (type background)))     )-    (symbol "ADUM5000WARWZ-RL_1_1"+    (symbol "ADUM5000WARWZ_1_1"     (pin power_in line (at -17.78 7.62 0) (length 5.08)       (name "VDD1" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))
adum5000warwz.lbr+3−3
@@ -93,7 +93,7 @@ </package> </packages> <symbols>-<symbol name="ADUM5000WARWZ-RL">+<symbol name="ADUM5000WARWZ">   <description>Analog Devices DC-DC Converters, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet</description>   <wire x1="-12.7" y1="10.16" x2="12.7" y2="10.16" width="0.254" layer="94"/>   <wire x1="12.7" y1="10.16" x2="12.7" y2="-12.7" width="0.254" layer="94"/>@@ -120,10 +120,10 @@ </symbol> </symbols> <devicesets>-<deviceset name="ADUM5000WARWZ-RL" prefix="U">+<deviceset name="ADUM5000WARWZ" prefix="U">   <description>Analog Devices DC-DC Converters, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet</description>   <gates>-    <gate name="G$1" symbol="ADUM5000WARWZ-RL" x="0" y="0"/>+    <gate name="G$1" symbol="ADUM5000WARWZ" x="0" y="0"/>   </gates>   <devices>     <device name="" package="SOIC-16W_7.5x10.3mm_P1.27mm">
docs/hero.png
⋯ 1 unchanged line ⋯
package.json+72−25
@@ -1,6 +1,6 @@ {   "slug": "adum5000warwz",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Analog Devices DC-DC Converters, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -28,8 +28,7 @@     "viewers/symbol.html",     "viewers/footprint.html",     "adum5000warwz-hero.glb",-    "adum5000warwz-hero.overlay.json",-    "adum5000warwz-etched.glb"+    "adum5000warwz-hero.overlay.json"   ],   "component": {     "mpn": "ADUM5000WARWZ",@@ -43,7 +42,7 @@       "symbol": "adum5000warwz.kicad_sym",       "footprint": "adum5000warwz.kicad_mod",       "model_3d": "adum5000warwz-hero.glb",-      "model_3d_plain": "adum5000warwz-etched.glb",+      "model_3d_plain": "adum5000warwz.glb",       "model_3d_step": "adum5000warwz-etched.step",       "model_3d_step_plain": "adum5000warwz.step",       "lbr": "adum5000warwz.lbr"@@ -54,7 +53,7 @@       "mouser": "584-ADUM5000WARWZ"     },     "distributor_check": {-      "checked_at": "2026-11-06T00:17:42Z",+      "checked_at": "2026-11-13T02:02:31Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "505-ADUM5000WARWZ-ND",@@ -70,13 +69,13 @@         "number": "1",         "name": "VDD1",         "type": "power_in",-        "description": "Primary supply voltage, specified as 3.0 V to 5.5 V in Table 12; pins 1 and 7 are internally connected and both should be externally tied to a common power source."+        "description": "Primary supply voltage of 3.0 V to 5.5 V; pin 1 is internally connected to pin 7 and both should be externally connected to a common power source."       },       {         "number": "2",         "name": "GND1",         "type": "power_in",-        "description": "Ground reference for the primary side of the converter; pins 2 and 8 are internally connected and both should be connected to a common ground."+        "description": "Ground 1, the ground reference for the primary side of the converter; pin 2 is internally connected to pin 8 and both should be connected to a common ground."       },       {         "number": "3",@@ -88,43 +87,43 @@         "number": "4",         "name": "RCIN",         "type": "input",-        "description": "Regulation control input: in slave mode (RCSEL low) it connects to a master RCOUT or is tied low to disable the converter; it is weakly pulled low and must not be tied high while RCSEL is low."+        "description": "Regulation control input: in slave mode (RCSEL low) it is connected to a master RCOUT or tied low to disable the converter, it is weakly pulled low, and it must not be tied high while RCSEL is low."       },       {         "number": "5",         "name": "RCOUT",         "type": "output",-        "description": "Regulation control output: in master configuration it connects to the RCIN pin of a slave isoPower device to allow regulation of additional devices."+        "description": "Regulation control output: in master configuration it is connected to the RCIN pin of a slave isoPower device to allow regulation of additional devices."       },       {         "number": "6",         "name": "RCSEL",         "type": "input",-        "description": "Selects self-regulating master mode (high) or slave mode (low); it is weakly pulled high and should be tied high or low in noisy environments."+        "description": "Control input that selects self-regulating master mode (high) or slave mode (low); it is weakly pulled high and should be tied high or low in noisy environments."       },       {         "number": "7",         "name": "VDD1",         "type": "power_in",-        "description": "Primary supply voltage, specified as 3.0 V to 5.5 V in Table 12; internally connected to pin 1 and both pins should be externally tied to a common power source."+        "description": "Primary supply voltage of 3.0 V to 5.5 V; internally connected to pin 1 and should be externally connected to the same power source."       },       {         "number": "8",         "name": "GND1",         "type": "power_in",-        "description": "Ground reference for the primary side of the converter; internally connected to pin 2 and both pins should be connected to a common ground."+        "description": "Ground 1, the primary-side ground reference; internally connected to pin 2 and should be connected to a common ground."       },       {         "number": "9",         "name": "GNDISO",         "type": "power_in",-        "description": "Ground reference for the secondary side of the converter; pins 9 and 15 are internally connected and both should be connected to a common ground."+        "description": "Ground reference for the secondary side of the converter; internally connected to pin 15 and should be connected to a common ground."       },       {         "number": "10",         "name": "VISO",         "type": "power_out",-        "description": "Secondary supply output for external loads, 3.3 V (VSEL low) or 5.0 V (VSEL high), with 5.0 V not guaranteed for a 3.3 V primary input; pins 10 and 16 are internally connected and connecting both is recommended."+        "description": "Secondary supply output for external loads at 3.3 V (VSEL low) or 5.0 V (VSEL high); 5.0 V output is not guaranteed with a 3.3 V primary input, and it is internally connected to pin 16."       },       {         "number": "11",@@ -142,7 +141,7 @@         "number": "13",         "name": "VSEL",         "type": "input",-        "description": "Output voltage select: the VISO setpoint is 5.0 V when VSEL = VISO and 3.3 V when VSEL = GNDISO; it is weakly pulled high, should be tied high or low in noisy environments, and has no function in slave regulation mode."+        "description": "Output voltage selection: VISO setpoint is 5.0 V when VSEL = VISO and 3.3 V when VSEL = GNDISO; it is weakly pulled high and should be tied high or low in noisy environments."       },       {         "number": "14",@@ -154,13 +153,13 @@         "number": "15",         "name": "GNDISO",         "type": "power_in",-        "description": "Ground reference for the secondary side of the converter; internally connected to pin 9 and both pins should be connected to a common ground."+        "description": "Ground reference for the secondary side of the converter; internally connected to pin 9 and should be connected to a common ground."       },       {         "number": "16",         "name": "VISO",         "type": "power_out",-        "description": "Secondary supply output for external loads, 3.3 V (VSEL low) or 5.0 V (VSEL high); internally connected to pin 10 and connecting both externally is recommended."+        "description": "Secondary supply output for external loads at 3.3 V or 5.0 V as selected by VSEL; internally connected to pin 10 and connecting both externally is recommended."       }     ],     "provenance": {@@ -174,11 +173,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Primary supply range is stated inconsistently. Table 12 (pin function, pins 1 and 7) gives VDD1 as 3; Datasheet notes VISO 5.0 V output is not guaranteed when the primary input is 3.3 V; the pin descrip; Pinout was taken from the Figure 3 top-view pin list and cross-checked against Table 12; both agree."+          "extractor flagged: Package mapping: the datasheet gives the package as 16-Lead SOIC_W Wide Body (RW-16) with a 7.60 mm ; VDD1 range is inconsistent within the datasheet: Table 12 gives 3.0 V to 5.5 V, while Table 9 gives "         ],-        "pages_sent": 10,-        "cost_usd": 0.0657,-        "at": "2026-11-06T00:17:28"+        "pages_sent": 15,+        "cost_usd": 0.0961,+        "at": "2026-11-13T02:02:16"       },       "datasheet": {         "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM5000W.pdf",@@ -215,7 +214,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -233,10 +232,58 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "460aaf16eecfbd54e1975b0fe585710b10dc73c5def72bc7a924d838a2596a82",-        "checked": "2026-11-12",+        "sha256": "f1f4e51b6156bb6b0131de1c4eb058dcadbfff9a6008e645b8f265fc1378c0d7",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }-    ]+    ],+    "package_dims": {+      "package_code": "RW-16",+      "source_page": 15,+      "D": {+        "nom_mm": 10.3,+        "range_mm": [+          10.1,+          10.5+        ]+      },+      "E1": {+        "nom_mm": 7.5,+        "range_mm": [+          7.4,+          7.6+        ]+      },+      "E": {+        "nom_mm": 10.325,+        "range_mm": [+          10.0,+          10.65+        ]+      },+      "e": {+        "nom_mm": 1.27,+        "range_mm": [+          null,+          null+        ]+      },+      "A": {+        "nom_mm": 2.5,+        "range_mm": [+          2.35,+          2.65+        ]+      },+      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+      "model_check": {+        "file": "adum5000warwz.step",+        "verdict": "PASS",+        "reasons": [+          "height and body within the datasheet's package drawing"+        ],+        "by": "factory/package_fit.py"+      }+    }   } }
page.json+75−26
@@ -4,7 +4,7 @@   "slug": "adum5000warwz",   "title": "ADUM5000WARWZ",   "brief": "Analog Devices DC-DC Converters, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -25,7 +25,7 @@       "symbol": "adum5000warwz.kicad_sym",       "footprint": "adum5000warwz.kicad_mod",       "model_3d": "adum5000warwz-hero.glb",-      "model_3d_plain": "adum5000warwz-etched.glb",+      "model_3d_plain": "adum5000warwz.glb",       "model_3d_step": "adum5000warwz-etched.step",       "model_3d_step_plain": "adum5000warwz.step",       "lbr": "adum5000warwz.lbr"@@ -36,7 +36,7 @@       "mouser": "584-ADUM5000WARWZ"     },     "distributor_check": {-      "checked_at": "2026-11-06T00:17:42Z",+      "checked_at": "2026-11-13T02:02:31Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "505-ADUM5000WARWZ-ND",@@ -52,13 +52,13 @@         "number": "1",         "name": "VDD1",         "type": "power_in",-        "description": "Primary supply voltage, specified as 3.0 V to 5.5 V in Table 12; pins 1 and 7 are internally connected and both should be externally tied to a common power source."+        "description": "Primary supply voltage of 3.0 V to 5.5 V; pin 1 is internally connected to pin 7 and both should be externally connected to a common power source."       },       {         "number": "2",         "name": "GND1",         "type": "power_in",-        "description": "Ground reference for the primary side of the converter; pins 2 and 8 are internally connected and both should be connected to a common ground."+        "description": "Ground 1, the ground reference for the primary side of the converter; pin 2 is internally connected to pin 8 and both should be connected to a common ground."       },       {         "number": "3",@@ -70,43 +70,43 @@         "number": "4",         "name": "RCIN",         "type": "input",-        "description": "Regulation control input: in slave mode (RCSEL low) it connects to a master RCOUT or is tied low to disable the converter; it is weakly pulled low and must not be tied high while RCSEL is low."+        "description": "Regulation control input: in slave mode (RCSEL low) it is connected to a master RCOUT or tied low to disable the converter, it is weakly pulled low, and it must not be tied high while RCSEL is low."       },       {         "number": "5",         "name": "RCOUT",         "type": "output",-        "description": "Regulation control output: in master configuration it connects to the RCIN pin of a slave isoPower device to allow regulation of additional devices."+        "description": "Regulation control output: in master configuration it is connected to the RCIN pin of a slave isoPower device to allow regulation of additional devices."       },       {         "number": "6",         "name": "RCSEL",         "type": "input",-        "description": "Selects self-regulating master mode (high) or slave mode (low); it is weakly pulled high and should be tied high or low in noisy environments."+        "description": "Control input that selects self-regulating master mode (high) or slave mode (low); it is weakly pulled high and should be tied high or low in noisy environments."       },       {         "number": "7",         "name": "VDD1",         "type": "power_in",-        "description": "Primary supply voltage, specified as 3.0 V to 5.5 V in Table 12; internally connected to pin 1 and both pins should be externally tied to a common power source."+        "description": "Primary supply voltage of 3.0 V to 5.5 V; internally connected to pin 1 and should be externally connected to the same power source."       },       {         "number": "8",         "name": "GND1",         "type": "power_in",-        "description": "Ground reference for the primary side of the converter; internally connected to pin 2 and both pins should be connected to a common ground."+        "description": "Ground 1, the primary-side ground reference; internally connected to pin 2 and should be connected to a common ground."       },       {         "number": "9",         "name": "GNDISO",         "type": "power_in",-        "description": "Ground reference for the secondary side of the converter; pins 9 and 15 are internally connected and both should be connected to a common ground."+        "description": "Ground reference for the secondary side of the converter; internally connected to pin 15 and should be connected to a common ground."       },       {         "number": "10",         "name": "VISO",         "type": "power_out",-        "description": "Secondary supply output for external loads, 3.3 V (VSEL low) or 5.0 V (VSEL high), with 5.0 V not guaranteed for a 3.3 V primary input; pins 10 and 16 are internally connected and connecting both is recommended."+        "description": "Secondary supply output for external loads at 3.3 V (VSEL low) or 5.0 V (VSEL high); 5.0 V output is not guaranteed with a 3.3 V primary input, and it is internally connected to pin 16."       },       {         "number": "11",@@ -124,7 +124,7 @@         "number": "13",         "name": "VSEL",         "type": "input",-        "description": "Output voltage select: the VISO setpoint is 5.0 V when VSEL = VISO and 3.3 V when VSEL = GNDISO; it is weakly pulled high, should be tied high or low in noisy environments, and has no function in slave regulation mode."+        "description": "Output voltage selection: VISO setpoint is 5.0 V when VSEL = VISO and 3.3 V when VSEL = GNDISO; it is weakly pulled high and should be tied high or low in noisy environments."       },       {         "number": "14",@@ -136,13 +136,13 @@         "number": "15",         "name": "GNDISO",         "type": "power_in",-        "description": "Ground reference for the secondary side of the converter; internally connected to pin 9 and both pins should be connected to a common ground."+        "description": "Ground reference for the secondary side of the converter; internally connected to pin 9 and should be connected to a common ground."       },       {         "number": "16",         "name": "VISO",         "type": "power_out",-        "description": "Secondary supply output for external loads, 3.3 V (VSEL low) or 5.0 V (VSEL high); internally connected to pin 10 and connecting both externally is recommended."+        "description": "Secondary supply output for external loads at 3.3 V or 5.0 V as selected by VSEL; internally connected to pin 10 and connecting both externally is recommended."       }     ],     "provenance": {@@ -156,11 +156,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Primary supply range is stated inconsistently. Table 12 (pin function, pins 1 and 7) gives VDD1 as 3; Datasheet notes VISO 5.0 V output is not guaranteed when the primary input is 3.3 V; the pin descrip; Pinout was taken from the Figure 3 top-view pin list and cross-checked against Table 12; both agree."+          "extractor flagged: Package mapping: the datasheet gives the package as 16-Lead SOIC_W Wide Body (RW-16) with a 7.60 mm ; VDD1 range is inconsistent within the datasheet: Table 12 gives 3.0 V to 5.5 V, while Table 9 gives "         ],-        "pages_sent": 10,-        "cost_usd": 0.0657,-        "at": "2026-11-06T00:17:28"+        "pages_sent": 15,+        "cost_usd": 0.0961,+        "at": "2026-11-13T02:02:16"       },       "datasheet": {         "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM5000W.pdf",@@ -197,7 +197,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -215,11 +215,59 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "460aaf16eecfbd54e1975b0fe585710b10dc73c5def72bc7a924d838a2596a82",-        "checked": "2026-11-12",+        "sha256": "f1f4e51b6156bb6b0131de1c4eb058dcadbfff9a6008e645b8f265fc1378c0d7",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }-    ]+    ],+    "package_dims": {+      "package_code": "RW-16",+      "source_page": 15,+      "D": {+        "nom_mm": 10.3,+        "range_mm": [+          10.1,+          10.5+        ]+      },+      "E1": {+        "nom_mm": 7.5,+        "range_mm": [+          7.4,+          7.6+        ]+      },+      "E": {+        "nom_mm": 10.325,+        "range_mm": [+          10,+          10.65+        ]+      },+      "e": {+        "nom_mm": 1.27,+        "range_mm": [+          null,+          null+        ]+      },+      "A": {+        "nom_mm": 2.5,+        "range_mm": [+          2.35,+          2.65+        ]+      },+      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+      "model_check": {+        "file": "adum5000warwz.step",+        "verdict": "PASS",+        "reasons": [+          "height and body within the datasheet's package drawing"+        ],+        "by": "factory/package_fit.py"+      }+    }   },   "metadata": {     "specs": {@@ -798,10 +846,11 @@     "viewers/symbol.html",     "viewers/footprint.html",     "adum5000warwz-hero.glb",-    "adum5000warwz-hero.overlay.json",-    "adum5000warwz-etched.glb"+    "adum5000warwz-hero.overlay.json"   ],   "visibility": {     "public": true-  }+  },+  "description": "Analog Devices DC-DC Converters, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file