Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ADUM5000WARWZ

Analog Devices · DC-DC Converters · SOIC-16-300mil

ADUM5000WARWZ from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD1 power_in Primary supply voltage of 3.0 V to 5.5 V; pins 1 and 7 are internally connected and both should be externally connected to a common power source.
2 GND1 power_in Ground reference for the primary side of the converter; pins 2 and 8 are internally connected and both should be connected to a common ground.
3 NC unconnected No internal connection.
4 RCIN input Regulation control input that is weakly pulled low; in slave mode (RCSEL low) it connects to a master RCOUT or is tied low to disable the converter, and it must not be tied high while RCSEL is low.
5 RCOUT output Regulation control output that, in master configuration, connects to the RCIN pin of a slave isoPower device to regulate it.
6 RCSEL input Control input that selects self-regulating master mode (high) or slave mode (low); it is weakly pulled high and should be tied high or low in noisy environments.
7 VDD1 power_in Primary supply voltage of 3.0 V to 5.5 V; internally connected to pin 1 and recommended to be externally connected to the same power source.
8 GND1 power_in Ground reference for the primary side of the converter; internally connected to pin 2 and recommended to be connected to the same ground.
9 GNDISO power_in Ground reference for the secondary side of the converter; pins 9 and 15 are internally connected and both should be connected to a common ground.
10 VISO power_out Secondary supply output for external loads of 3.3 V (VSEL low) or 5.0 V (VSEL high); 5.0 V is not guaranteed with a 3.3 V primary input, and pins 10 and 16 are internally connected and should both be connected externally.
11 NC unconnected No internal connection.
12 NC unconnected No internal connection.
13 VSEL input Output voltage select: VISO setpoint is 5.0 V when VSEL = VISO and 3.3 V when VSEL = GNDISO; it is weakly pulled high, should be tied high or low in noisy environments, and has no function in slave regulation mode.
14 NC unconnected No internal connection.
15 GNDISO power_in Ground reference for the secondary side of the converter; internally connected to pin 9 and recommended to be connected to the same ground.
16 VISO power_out Secondary supply output for external loads of 3.3 V or 5.0 V per VSEL; internally connected to pin 10 and connecting both externally is recommended.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOIC-16-300mil
Category Power Management ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature TST -55 150 °C 7
Ambient Operating Temperature TA -40 105 °C 7
Supply Voltages (VDDx, VISO) VDDx, VISO -0.5 7 V Each voltage relative to its respective ground 7
Input Voltage (RCSEL, RCIN, VSEL) RCSEL, RCIN, VSEL -0.5 V Upper limit VDDI + 0.5 V as printed (VDDI = input-side supply) 7
Output Voltage (RCOUT) RCOUT -0.5 V Upper limit VDDO + 0.5 V as printed (VDDO = output-side supply) 7
Average Total Output Current IISO 100 mA See Figure 2 for derating vs. temperature 7
Common-Mode Transients -100 100 kV/µs Across the isolation barrier 7
Operating Temperature TA -40 105 °C Operation at 105°C requires reduction of maximum load current per Table 10 6
Supply Voltage VDD1 at VSEL = 0 V VDD1 2.7 5.5 V VSEL = 0 V; relative to GND1 6
Supply Voltage VDD1 at VSEL = 5 V VDD1 4.5 5.5 V VSEL = 5 V; relative to GND1 6
Setpoint (5 V primary / 5 V secondary) VISO 4.7 5 5.4 V IISO = 0 mA 3
Load Regulation (5 V primary / 5 V secondary) VISO(LOAD) 1 5 % IISO = 8 mA to 72 mA 3
IDD1 Supply Current, No VISO Load (5 V / 5 V) IDD1(Q) 4 15 mA IISO = 0 mA 3
Setpoint (3.3 V primary / 3.3 V secondary) VISO 3 3.3 3.6 V IISO = 0 mA 3
Load Regulation (3.3 V primary / 3.3 V secondary) VISO(LOAD) 1 5 % IISO = 4 mA to 36 mA 3
IDD1 Supply Current, No VISO Load (3.3 V / 3.3 V) IDD1(Q) 3 12 mA IISO = 0 mA 3
Setpoint (5 V primary / 3.3 V secondary) VISO 3 3.3 3.6 V IISO = 0 mA 4
Load Regulation (5 V primary / 3.3 V secondary) VISO(LOAD) 1 5 % IISO = 10 mA to 100 mA 4
IDD1 Supply Current, No VISO Load (5 V / 3.3 V) IDD1(Q) 3 12 mA IISO = 0 mA 4

CAD (KiCad official)

  • Symbol: ADUM5000WARWZ
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: adum5000warwz-etched.step / adum5000warwz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adum5000warwz.step / adum5000warwz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (15 pp, sha256 5197f63a91ac6d0d, retrieved 2026-11-17)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF