← Commit history
README.md+29−29@@ -8,22 +8,22 @@ ADUM5000WARWZ from Analog Devices, in a SOIC-16-300mil. Pinout and pin descripti | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VDD1 | power_in | Primary supply voltage of 3.0 V to 5.5 V; pin 1 is internally connected to pin 7 and both should be externally connected to a common power source. |-| 2 | GND1 | power_in | Ground 1, the ground reference for the primary side of the converter; pin 2 is internally connected to pin 8 and both should be connected to a common ground. |+| 1 | VDD1 | power_in | Primary supply voltage of 3.0 V to 5.5 V; pins 1 and 7 are internally connected and both should be externally connected to a common power source. |+| 2 | GND1 | power_in | Ground reference for the primary side of the converter; pins 2 and 8 are internally connected and both should be connected to a common ground. | | 3 | NC | unconnected | No internal connection. |-| 4 | RCIN | input | Regulation control input: in slave mode (RCSEL low) it is connected to a master RCOUT or tied low to disable the converter, it is weakly pulled low, and it must not be tied high while RCSEL is low. |-| 5 | RCOUT | output | Regulation control output: in master configuration it is connected to the RCIN pin of a slave isoPower device to allow regulation of additional devices. |+| 4 | RCIN | input | Regulation control input that is weakly pulled low; in slave mode (RCSEL low) it connects to a master RCOUT or is tied low to disable the converter, and it must not be tied high while RCSEL is low. |+| 5 | RCOUT | output | Regulation control output that, in master configuration, connects to the RCIN pin of a slave isoPower device to regulate it. | | 6 | RCSEL | input | Control input that selects self-regulating master mode (high) or slave mode (low); it is weakly pulled high and should be tied high or low in noisy environments. |-| 7 | VDD1 | power_in | Primary supply voltage of 3.0 V to 5.5 V; internally connected to pin 1 and should be externally connected to the same power source. |-| 8 | GND1 | power_in | Ground 1, the primary-side ground reference; internally connected to pin 2 and should be connected to a common ground. |-| 9 | GNDISO | power_in | Ground reference for the secondary side of the converter; internally connected to pin 15 and should be connected to a common ground. |-| 10 | VISO | power_out | Secondary supply output for external loads at 3.3 V (VSEL low) or 5.0 V (VSEL high); 5.0 V output is not guaranteed with a 3.3 V primary input, and it is internally connected to pin 16. |+| 7 | VDD1 | power_in | Primary supply voltage of 3.0 V to 5.5 V; internally connected to pin 1 and recommended to be externally connected to the same power source. |+| 8 | GND1 | power_in | Ground reference for the primary side of the converter; internally connected to pin 2 and recommended to be connected to the same ground. |+| 9 | GNDISO | power_in | Ground reference for the secondary side of the converter; pins 9 and 15 are internally connected and both should be connected to a common ground. |+| 10 | VISO | power_out | Secondary supply output for external loads of 3.3 V (VSEL low) or 5.0 V (VSEL high); 5.0 V is not guaranteed with a 3.3 V primary input, and pins 10 and 16 are internally connected and should both be connected externally. | | 11 | NC | unconnected | No internal connection. | | 12 | NC | unconnected | No internal connection. |-| 13 | VSEL | input | Output voltage selection: VISO setpoint is 5.0 V when VSEL = VISO and 3.3 V when VSEL = GNDISO; it is weakly pulled high and should be tied high or low in noisy environments. |+| 13 | VSEL | input | Output voltage select: VISO setpoint is 5.0 V when VSEL = VISO and 3.3 V when VSEL = GNDISO; it is weakly pulled high, should be tied high or low in noisy environments, and has no function in slave regulation mode. | | 14 | NC | unconnected | No internal connection. |-| 15 | GNDISO | power_in | Ground reference for the secondary side of the converter; internally connected to pin 9 and should be connected to a common ground. |-| 16 | VISO | power_out | Secondary supply output for external loads at 3.3 V or 5.0 V as selected by VSEL; internally connected to pin 10 and connecting both externally is recommended. |+| 15 | GNDISO | power_in | Ground reference for the secondary side of the converter; internally connected to pin 9 and recommended to be connected to the same ground. |+| 16 | VISO | power_out | Secondary supply output for external loads of 3.3 V or 5.0 V per VSEL; internally connected to pin 10 and connecting both externally is recommended. | ## Key specifications @@ -40,25 +40,25 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Setpoint, 5 V primary / 5 V secondary | VISO | 4.7 | 5 | 5.4 | V | IISO = 0 mA | 3 |-| Load Regulation, 5 V primary / 5 V secondary | VISO(LOAD) | | 1 | 5 | % | IISO = 8 mA to 72 mA | 3 |-| IDD1 Supply Current, No VISO Load, 5 V primary / 5 V secondary | IDD1(Q) | | 4 | 15 | mA | IISO = 0 mA | 3 |-| Setpoint, 3.3 V primary / 3.3 V secondary | VISO | 3 | 3.3 | 3.6 | V | IISO = 0 mA | 3 |-| Load Regulation, 3.3 V primary / 3.3 V secondary | VISO(LOAD) | | 1 | 5 | % | IISO = 4 mA to 36 mA | 3 |-| IDD1 Supply Current, No VISO Load, 3.3 V primary / 3.3 V secondary | IDD1(Q) | | 3 | 12 | mA | IISO = 0 mA | 3 |-| Setpoint, 5 V primary / 3.3 V secondary | VISO | 3 | 3.3 | 3.6 | V | IISO = 0 mA | 4 |-| Load Regulation, 5 V primary / 3.3 V secondary | VISO(LOAD) | | 1 | 5 | % | IISO = 10 mA to 100 mA | 4 |-| IDD1 Supply Current, No VISO Load, 5 V primary / 3.3 V secondary | IDD1(Q) | | 3 | 12 | mA | IISO = 0 mA | 4 |-| Supply Voltage VDD1 (primary) | VDD1 | 2.7 | | 5.5 | V | VSEL = 0 V | 6 |-| Supply Voltage VDD1 (primary) | VDD1 | 4.5 | | 5.5 | V | VSEL = 5 V | 6 |-| Operating Temperature | TA | -40 | | 105 | °C | | 6 | | Storage Temperature | TST | -55 | | 150 | °C | | 7 | | Ambient Operating Temperature | TA | -40 | | 105 | °C | | 7 |-| Supply Voltages | VDDx, VISO | -0.5 | | 7 | V | each voltage relative to its respective ground | 7 |-| Input Voltage (RCSEL, RCIN, VSEL) | VIN | -0.5 | | | V | | 7 |-| Output Voltage (RCOUT) | VOUT | -0.5 | | | V | | 7 |-| Average Total Output Current | IISO | | | 100 | mA | | 7 |-| Common-Mode Transients | | -100 | | 100 | kV/µs | across the isolation barrier | 7 |+| Supply Voltages (VDDx, VISO) | VDDx, VISO | -0.5 | | 7 | V | Each voltage relative to its respective ground | 7 |+| Input Voltage (RCSEL, RCIN, VSEL) | RCSEL, RCIN, VSEL | -0.5 | | | V | Upper limit VDDI + 0.5 V as printed (VDDI = input-side supply) | 7 |+| Output Voltage (RCOUT) | RCOUT | -0.5 | | | V | Upper limit VDDO + 0.5 V as printed (VDDO = output-side supply) | 7 |+| Average Total Output Current | IISO | | | 100 | mA | See Figure 2 for derating vs. temperature | 7 |+| Common-Mode Transients | | -100 | | 100 | kV/µs | Across the isolation barrier | 7 |+| Operating Temperature | TA | -40 | | 105 | °C | Operation at 105°C requires reduction of maximum load current per Table 10 | 6 |+| Supply Voltage VDD1 at VSEL = 0 V | VDD1 | 2.7 | | 5.5 | V | VSEL = 0 V; relative to GND1 | 6 |+| Supply Voltage VDD1 at VSEL = 5 V | VDD1 | 4.5 | | 5.5 | V | VSEL = 5 V; relative to GND1 | 6 |+| Setpoint (5 V primary / 5 V secondary) | VISO | 4.7 | 5 | 5.4 | V | IISO = 0 mA | 3 |+| Load Regulation (5 V primary / 5 V secondary) | VISO(LOAD) | | 1 | 5 | % | IISO = 8 mA to 72 mA | 3 |+| IDD1 Supply Current, No VISO Load (5 V / 5 V) | IDD1(Q) | | 4 | 15 | mA | IISO = 0 mA | 3 |+| Setpoint (3.3 V primary / 3.3 V secondary) | VISO | 3 | 3.3 | 3.6 | V | IISO = 0 mA | 3 |+| Load Regulation (3.3 V primary / 3.3 V secondary) | VISO(LOAD) | | 1 | 5 | % | IISO = 4 mA to 36 mA | 3 |+| IDD1 Supply Current, No VISO Load (3.3 V / 3.3 V) | IDD1(Q) | | 3 | 12 | mA | IISO = 0 mA | 3 |+| Setpoint (5 V primary / 3.3 V secondary) | VISO | 3 | 3.3 | 3.6 | V | IISO = 0 mA | 4 |+| Load Regulation (5 V primary / 3.3 V secondary) | VISO(LOAD) | | 1 | 5 | % | IISO = 10 mA to 100 mA | 4 |+| IDD1 Supply Current, No VISO Load (5 V / 3.3 V) | IDD1(Q) | | 3 | 12 | mA | IISO = 0 mA | 4 | ## CAD (KiCad official) @@ -71,7 +71,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM5000W.pdf) (15 pp, sha256 `5197f63a91ac6d0d`, retrieved 2026-11-13, tier: manufacturer)+- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM5000W.pdf) (15 pp, sha256 `5197f63a91ac6d0d`, retrieved 2026-11-17) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
package.json+21−20@@ -1,6 +1,6 @@ { "slug": "adum5000warwz",- "version": "0.1.1",+ "version": "0.1.2", "type": "component", "description": "Analog Devices DC-DC Converters, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -53,7 +53,7 @@ "mouser": "584-ADUM5000WARWZ" }, "distributor_check": {- "checked_at": "2026-11-13T02:02:31Z",+ "checked_at": "2026-11-17T23:25:34Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "505-ADUM5000WARWZ-ND",@@ -69,13 +69,13 @@ "number": "1", "name": "VDD1", "type": "power_in",- "description": "Primary supply voltage of 3.0 V to 5.5 V; pin 1 is internally connected to pin 7 and both should be externally connected to a common power source."+ "description": "Primary supply voltage of 3.0 V to 5.5 V; pins 1 and 7 are internally connected and both should be externally connected to a common power source." }, { "number": "2", "name": "GND1", "type": "power_in",- "description": "Ground 1, the ground reference for the primary side of the converter; pin 2 is internally connected to pin 8 and both should be connected to a common ground."+ "description": "Ground reference for the primary side of the converter; pins 2 and 8 are internally connected and both should be connected to a common ground." }, { "number": "3",@@ -87,13 +87,13 @@ "number": "4", "name": "RCIN", "type": "input",- "description": "Regulation control input: in slave mode (RCSEL low) it is connected to a master RCOUT or tied low to disable the converter, it is weakly pulled low, and it must not be tied high while RCSEL is low."+ "description": "Regulation control input that is weakly pulled low; in slave mode (RCSEL low) it connects to a master RCOUT or is tied low to disable the converter, and it must not be tied high while RCSEL is low." }, { "number": "5", "name": "RCOUT", "type": "output",- "description": "Regulation control output: in master configuration it is connected to the RCIN pin of a slave isoPower device to allow regulation of additional devices."+ "description": "Regulation control output that, in master configuration, connects to the RCIN pin of a slave isoPower device to regulate it." }, { "number": "6",@@ -105,25 +105,25 @@ "number": "7", "name": "VDD1", "type": "power_in",- "description": "Primary supply voltage of 3.0 V to 5.5 V; internally connected to pin 1 and should be externally connected to the same power source."+ "description": "Primary supply voltage of 3.0 V to 5.5 V; internally connected to pin 1 and recommended to be externally connected to the same power source." }, { "number": "8", "name": "GND1", "type": "power_in",- "description": "Ground 1, the primary-side ground reference; internally connected to pin 2 and should be connected to a common ground."+ "description": "Ground reference for the primary side of the converter; internally connected to pin 2 and recommended to be connected to the same ground." }, { "number": "9", "name": "GNDISO", "type": "power_in",- "description": "Ground reference for the secondary side of the converter; internally connected to pin 15 and should be connected to a common ground."+ "description": "Ground reference for the secondary side of the converter; pins 9 and 15 are internally connected and both should be connected to a common ground." }, { "number": "10", "name": "VISO", "type": "power_out",- "description": "Secondary supply output for external loads at 3.3 V (VSEL low) or 5.0 V (VSEL high); 5.0 V output is not guaranteed with a 3.3 V primary input, and it is internally connected to pin 16."+ "description": "Secondary supply output for external loads of 3.3 V (VSEL low) or 5.0 V (VSEL high); 5.0 V is not guaranteed with a 3.3 V primary input, and pins 10 and 16 are internally connected and should both be connected externally." }, { "number": "11",@@ -141,7 +141,7 @@ "number": "13", "name": "VSEL", "type": "input",- "description": "Output voltage selection: VISO setpoint is 5.0 V when VSEL = VISO and 3.3 V when VSEL = GNDISO; it is weakly pulled high and should be tied high or low in noisy environments."+ "description": "Output voltage select: VISO setpoint is 5.0 V when VSEL = VISO and 3.3 V when VSEL = GNDISO; it is weakly pulled high, should be tied high or low in noisy environments, and has no function in slave regulation mode." }, { "number": "14",@@ -153,13 +153,13 @@ "number": "15", "name": "GNDISO", "type": "power_in",- "description": "Ground reference for the secondary side of the converter; internally connected to pin 9 and should be connected to a common ground."+ "description": "Ground reference for the secondary side of the converter; internally connected to pin 9 and recommended to be connected to the same ground." }, { "number": "16", "name": "VISO", "type": "power_out",- "description": "Secondary supply output for external loads at 3.3 V or 5.0 V as selected by VSEL; internally connected to pin 10 and connecting both externally is recommended."+ "description": "Secondary supply output for external loads of 3.3 V or 5.0 V per VSEL; internally connected to pin 10 and connecting both externally is recommended." } ], "provenance": {@@ -173,17 +173,18 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Package mapping: the datasheet gives the package as 16-Lead SOIC_W Wide Body (RW-16) with a 7.60 mm ; VDD1 range is inconsistent within the datasheet: Table 12 gives 3.0 V to 5.5 V, while Table 9 gives "+ "extractor flagged: Primary supply range conflict: Table 12 (pin description for VDD1) gives 3.0 V to 5.5 V, while Table; Package hint was SOIC-16-300mil. The datasheet gives a 16-lead SOIC_W wide-body package (RW-16, 7.6 " ], "pages_sent": 15,- "cost_usd": 0.0961,- "at": "2026-11-13T02:02:16"+ "cost_usd": 0.0958,+ "at": "2026-11-17T23:25:05" }, "datasheet": { "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM5000W.pdf", "pages": 15, "sha256": "5197f63a91ac6d0d",- "source_tier": "mfr"+ "source_tier": "mfr",+ "citation": "Analog Devices datasheet" }, "cad": "KiCad official (CC-BY-SA 4.0)", "pins": {@@ -214,7 +215,7 @@ "centre_offset_mm": 0.0, "footprint_binding": "identity", "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",- "checked": "2026-11-13",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -232,8 +233,8 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "f1f4e51b6156bb6b0131de1c4eb058dcadbfff9a6008e645b8f265fc1378c0d7",- "checked": "2026-11-13",+ "sha256": "d13f66765c9df1e3a89702e9ebf09a9a1095b1f2908a6d7833d5871b10ec0270",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],
page.json+24−21@@ -4,7 +4,7 @@ "slug": "adum5000warwz", "title": "ADUM5000WARWZ", "brief": "Analog Devices DC-DC Converters, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.1",+ "version": "0.1.2", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "584-ADUM5000WARWZ" }, "distributor_check": {- "checked_at": "2026-11-13T02:02:31Z",+ "checked_at": "2026-11-17T23:25:34Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "505-ADUM5000WARWZ-ND",@@ -52,13 +52,13 @@ "number": "1", "name": "VDD1", "type": "power_in",- "description": "Primary supply voltage of 3.0 V to 5.5 V; pin 1 is internally connected to pin 7 and both should be externally connected to a common power source."+ "description": "Primary supply voltage of 3.0 V to 5.5 V; pins 1 and 7 are internally connected and both should be externally connected to a common power source." }, { "number": "2", "name": "GND1", "type": "power_in",- "description": "Ground 1, the ground reference for the primary side of the converter; pin 2 is internally connected to pin 8 and both should be connected to a common ground."+ "description": "Ground reference for the primary side of the converter; pins 2 and 8 are internally connected and both should be connected to a common ground." }, { "number": "3",@@ -70,13 +70,13 @@ "number": "4", "name": "RCIN", "type": "input",- "description": "Regulation control input: in slave mode (RCSEL low) it is connected to a master RCOUT or tied low to disable the converter, it is weakly pulled low, and it must not be tied high while RCSEL is low."+ "description": "Regulation control input that is weakly pulled low; in slave mode (RCSEL low) it connects to a master RCOUT or is tied low to disable the converter, and it must not be tied high while RCSEL is low." }, { "number": "5", "name": "RCOUT", "type": "output",- "description": "Regulation control output: in master configuration it is connected to the RCIN pin of a slave isoPower device to allow regulation of additional devices."+ "description": "Regulation control output that, in master configuration, connects to the RCIN pin of a slave isoPower device to regulate it." }, { "number": "6",@@ -88,25 +88,25 @@ "number": "7", "name": "VDD1", "type": "power_in",- "description": "Primary supply voltage of 3.0 V to 5.5 V; internally connected to pin 1 and should be externally connected to the same power source."+ "description": "Primary supply voltage of 3.0 V to 5.5 V; internally connected to pin 1 and recommended to be externally connected to the same power source." }, { "number": "8", "name": "GND1", "type": "power_in",- "description": "Ground 1, the primary-side ground reference; internally connected to pin 2 and should be connected to a common ground."+ "description": "Ground reference for the primary side of the converter; internally connected to pin 2 and recommended to be connected to the same ground." }, { "number": "9", "name": "GNDISO", "type": "power_in",- "description": "Ground reference for the secondary side of the converter; internally connected to pin 15 and should be connected to a common ground."+ "description": "Ground reference for the secondary side of the converter; pins 9 and 15 are internally connected and both should be connected to a common ground." }, { "number": "10", "name": "VISO", "type": "power_out",- "description": "Secondary supply output for external loads at 3.3 V (VSEL low) or 5.0 V (VSEL high); 5.0 V output is not guaranteed with a 3.3 V primary input, and it is internally connected to pin 16."+ "description": "Secondary supply output for external loads of 3.3 V (VSEL low) or 5.0 V (VSEL high); 5.0 V is not guaranteed with a 3.3 V primary input, and pins 10 and 16 are internally connected and should both be connected externally." }, { "number": "11",@@ -124,7 +124,7 @@ "number": "13", "name": "VSEL", "type": "input",- "description": "Output voltage selection: VISO setpoint is 5.0 V when VSEL = VISO and 3.3 V when VSEL = GNDISO; it is weakly pulled high and should be tied high or low in noisy environments."+ "description": "Output voltage select: VISO setpoint is 5.0 V when VSEL = VISO and 3.3 V when VSEL = GNDISO; it is weakly pulled high, should be tied high or low in noisy environments, and has no function in slave regulation mode." }, { "number": "14",@@ -136,13 +136,13 @@ "number": "15", "name": "GNDISO", "type": "power_in",- "description": "Ground reference for the secondary side of the converter; internally connected to pin 9 and should be connected to a common ground."+ "description": "Ground reference for the secondary side of the converter; internally connected to pin 9 and recommended to be connected to the same ground." }, { "number": "16", "name": "VISO", "type": "power_out",- "description": "Secondary supply output for external loads at 3.3 V or 5.0 V as selected by VSEL; internally connected to pin 10 and connecting both externally is recommended."+ "description": "Secondary supply output for external loads of 3.3 V or 5.0 V per VSEL; internally connected to pin 10 and connecting both externally is recommended." } ], "provenance": {@@ -156,17 +156,18 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Package mapping: the datasheet gives the package as 16-Lead SOIC_W Wide Body (RW-16) with a 7.60 mm ; VDD1 range is inconsistent within the datasheet: Table 12 gives 3.0 V to 5.5 V, while Table 9 gives "+ "extractor flagged: Primary supply range conflict: Table 12 (pin description for VDD1) gives 3.0 V to 5.5 V, while Table; Package hint was SOIC-16-300mil. The datasheet gives a 16-lead SOIC_W wide-body package (RW-16, 7.6 " ], "pages_sent": 15,- "cost_usd": 0.0961,- "at": "2026-11-13T02:02:16"+ "cost_usd": 0.0958,+ "at": "2026-11-17T23:25:05" }, "datasheet": { "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM5000W.pdf", "pages": 15, "sha256": "5197f63a91ac6d0d",- "source_tier": "mfr"+ "source_tier": "mfr",+ "citation": "Analog Devices datasheet" }, "cad": "KiCad official (CC-BY-SA 4.0)", "pins": {@@ -197,7 +198,7 @@ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",- "checked": "2026-11-13",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }, {@@ -215,8 +216,8 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "f1f4e51b6156bb6b0131de1c4eb058dcadbfff9a6008e645b8f265fc1378c0d7",- "checked": "2026-11-13",+ "sha256": "d13f66765c9df1e3a89702e9ebf09a9a1095b1f2908a6d7833d5871b10ec0270",+ "checked": "2026-11-17", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ],@@ -550,5 +551,7 @@ ], "visibility": { "public": true- }+ },+ "description": "Analog Devices DC-DC Converters, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }