# ADUM3195WBRQZ

**Analog Devices** · Isolation Amplifiers · QSOP-16

ADUM3195WBRQZ from Analog Devices, in a QSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | Side 1 supply voltage, 4.5 V to 5.5 V, to be decoupled with a 0.1 µF and a 1 µF capacitor to GND1. |
| 2 | GND1 | power_in | Ground reference for side 1. |
| 3 | NIC | unconnected | Not internally connected; may be tied to VDD1, GND1, or left floating. |
| 4 | VREF1 | power_out | Side 1 reference output of 2.5 V; the maximum capacitance on this pin (CREFOUT1) must not exceed 15 pF. |
| 5 | NIC | unconnected | Not internally connected; may be tied to VDD1, GND1, or left floating. |
| 6 | VOUT1 | output | Isolated output voltage that follows the VIN+ input with a typical gain of 1 when the op amp is in buffer configuration. |
| 7 | NC | unconnected | No connect; must be connected to GND1 and must not be left floating. |
| 8 | GND1 | power_in | Ground reference for side 1. |
| 9 | GND2 | power_in | Ground reference for side 2 (pins 9 to 16 are shorted together as the 2-terminal device). |
| 10 | VOUT2 | output | Output of the input op amp, used to configure gain or feedback on the input side. |
| 11 | VIN− | power_in | Inverting input of the side 2 op amp. |
| 12 | VIN+ | power_in | Noninverting input of the side 2 op amp; high-impedance input with a common-mode range of 0.25 V to VDD2 − 0.7 V. |
| 13 | VREF2 | power_out | Side 2 reference output of 2.5 V; the maximum capacitance on this pin (CREFOUT) must not exceed 22 nF. |
| 14 | NC | unconnected | No connect; must be connected to GND2 and must not be left floating. |
| 15 | GND2 | power_in | Ground reference for side 2. |
| 16 | VDD2 | power_in | Side 2 supply voltage, 4.5 V to 5.5 V, to be decoupled with a 0.1 µF and a 1 µF capacitor to GND2. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | QSOP-16 |
| Category | Signal Isolation Devices |
| Pins | 16 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -0.5 |  | 1.5 | mV |  | 3 |
| Input Offset Drift |  | -11 |  | 11 | µV/°C |  | 3 |
| Input-Bias Current |  | -0.2 |  | 0.2 | nA | TA = 25°C, VIN+ or VIN− = 2.5 V | 3 |
| Input-Bias Current Drift |  | -25 |  | 75 | pA/°C |  | 3 |
| Output Voltage VREF1, VREF2 | VREF1, VREF2 | 2.49 | 2.5 | 2.51 | V | 0 mA to 1 mA load, TA = 25°C | 3 |
| Output Voltage VREF1, VREF2 | VREF1, VREF2 | 2.47 | 2.5 | 2.53 | V | 0 mA to 1 mA load, TA = TMIN to TMAX | 3 |
| Reference Temperature Coefficient (Tempco) |  | -25 |  | 25 | ppm/°C |  | 3 |
| Output Offset Voltage |  | -6 |  | 6 | mV | VOUT1 − VIN+ (op amp in buffer configuration), VIN+ = 2.5 V, TA = 25°C | 3 |
| Output Offset Drift |  |  | -22 |  | µV/°C | VIN+ = 2.5 V, TA = −40 to 125°C | 3 |
| Output Gain Error |  | -0.5 |  | 0.5 | % |  | 3 |
| Output Gain Error Drift |  | -27 |  | 27 | ppm/°C |  | 3 |
| Common-Mode Transient Immunity (CMTI) | CMTI | 100 | 150 |  | kV/µs | /GND1, GND2/ = 1.5 kV | 3 |
| Operating Range, Side 1 | VDD1 | 4.5 | 5 | 5.5 | V |  | 3 |
| Operating Range, Side 2 | VDD2 | 4.5 | 5 | 5.5 | V |  | 4 |
| Supply Current, Side 1 | IDD1 |  | 4.1 | 4.9 | mA |  | 4 |
| Supply Current, Side 2 | IDD2 |  | 5.9 | 7.3 | mA |  | 4 |
| Operating Temperature | TA | -40 |  | 125 | °C |  | 5 |
| Supply Voltages | VDD1, VDD2 | 4.5 |  | 5.5 | V | Voltages relative to their respective grounds | 5 |
| Storage Temperature Range | TST | -65 |  | 150 | °C |  | 7 |
| Ambient Operating Temperature Range | TA | -40 |  | 125 | °C |  | 7 |
| Junction Temperature | TJ | -40 |  | 150 | °C |  | 7 |
| Supply Voltages | VDD1, VDD2 | -0.5 |  | 7 | V | All voltages relative to their respective grounds | 7 |
| Output Current per Output Pin |  | -11 |  | 11 | mA |  | 7 |
| Common-Mode Transients |  | -200 |  | 200 | kV/µs | Refers to common-mode transients across the insulation barrier | 7 |
| IC Junction-to-Ambient Thermal Resistance, 16-Lead QSOP | θJA |  | 83 |  | °C/W | Thermocouple located at center of package underside | 4 |

## Materials and finish

As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).

| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | pC |  | In accordance with DIN VDE V 0884-11:2017-01, each ADuM3195 is proof tested by applying an insulation test voltage ≥ 1192 V peak for 1 sec (partial discharge detection limit = 5 pC). The * marking bra | 5 |

## CAD (KiCad official)

- Symbol: `ADUM3195WBRQZ`
- Footprint: `Package_SO:QSOP-16_3.9x4.9mm_P0.635mm`
- 3D model: QSOP-16 (KiCad packages3D, STEP)
- 3D model files: `adum3195wbrqz-etched.step` / `adum3195wbrqz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `adum3195wbrqz.step` / `adum3195wbrqz.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/adum3195.pdf) (19 pp, sha256 `6612457a2cb52c64`, retrieved 2026-10-29, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/adum3195wbrqz-datasheet.pdf)