component
ADUM1402ARWZ-RL
Public Made by Adomby adom
Analog Devices Digital Isolators, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownADUM1402ARWZ-RL
Analog Devices · Digital Isolators · SOIC-16-300mil
ADUM1402ARWZ-RL from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | Supply voltage for isolator side 1. |
| 2 | GND1 | power_in | Ground 1, the ground reference for isolator side 1; internally connected to pin 8, and connecting both to GND1 is recommended. |
| 3 | VIA | input | Logic input A on isolator side 1. |
| 4 | VIB | input | Logic input B on isolator side 1. |
| 5 | VOC | output | Logic output C, enabled when VE1 is high or disconnected and disabled when VE1 is low. |
| 6 | VOD | output | Logic output D, enabled when VE1 is high or disconnected and disabled when VE1 is low. |
| 7 | VE1 | input | Output enable 1, active high logic input for VOC and VOD; connecting it to an external logic high or low is recommended in noisy environments. |
| 8 | GND1 | power_in | Ground 1, the ground reference for isolator side 1; internally connected to pin 2, and connecting both to GND1 is recommended. |
| 9 | GND2 | power_in | Ground 2, the ground reference for isolator side 2; internally connected to pin 15, and connecting both to GND2 is recommended. |
| 10 | VE2 | input | Output enable 2, active high logic input for VOA and VOB; VOA and VOB are enabled when VE2 is high or disconnected and disabled when low, and connecting it to an external logic high or low is recommended in noisy environments. |
| 11 | VID | input | Logic input D on isolator side 2. |
| 12 | VIC | input | Logic input C on isolator side 2. |
| 13 | VOB | output | Logic output B on isolator side 2, enabled when VE2 is high or disconnected and disabled when VE2 is low. |
| 14 | VOA | output | Logic output A on isolator side 2, enabled when VE2 is high or disconnected and disabled when VE2 is low. |
| 15 | GND2 | power_in | Ground 2, the ground reference for isolator side 2; internally connected to pin 9, and connecting both to GND2 is recommended. |
| 16 | VDD2 | power_in | Supply voltage for isolator side 2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-16-300mil |
| Category | Signal Isolation Devices |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Temperature (TA), commercial grade | TA | -40 | 105 | °C | Footnote 1: does not apply to W automotive grades | 20 | |
| Supply Voltages (VDD1, VDD2) | VDD1, VDD2 | 2.7 | 5.5 | V | Footnotes 1, 3: relative to respective ground | 20 | |
| Input Signal Rise and Fall Times | 1 | ms | 20 | ||||
| Storage Temperature | TST | -65 | 150 | °C | 21 | ||
| Ambient Operating Temperature | TA | -40 | 105 | °C | Footnote 1: does not apply to W automotive grades | 21 | |
| Supply Voltages (VDD1, VDD2) | VDD1, VDD2 | -0.5 | 7 | V | 21 | ||
| Input Voltage (VIA, VIB, VIC, VID, VE1, VE2) | VIA, VIB, VIC, VID, VE1, VE2 | -0.5 | V | Maximum printed as VDDI + 0.5 V | 21 | ||
| Output Voltage (VOA, VOB, VOC, VOD) | VOA, VOB, VOC, VOD | -0.5 | V | Maximum printed as VDDO + 0.5 V | 21 | ||
| Average Output Current per Pin, Side 1 | IO1 | -18 | 18 | mA | 21 | ||
| Average Output Current per Pin, Side 2 | IO2 | -22 | 22 | mA | 21 | ||
| Common-Mode Transients | -100 | 100 | kV/µs | Across the insulation barrier | 21 | ||
| Input Supply Current per Channel, Quiescent (5 V) | IDDI (Q) | 0.5 | 0.53 | mA | 4 | ||
| Output Supply Current per Channel, Quiescent (5 V) | IDDO (Q) | 0.19 | 0.21 | mA | 4 | ||
| ADuM1402 VDD1 or VDD2 Supply Current (5 V) | IDD1 (Q), IDD2 (Q) | 1.5 | 2.1 | mA | DC to 1 MHz logic signal freq. | 4 | |
| Input Currents (5 V, all models) | IIA, IIB, IIC, IID, IE1, IE2 | -10 | 0.01 | 10 | µA | 0 V ≤ VIA, VIB, VIC, VID ≤ VDD1 or VDD2, 0 V ≤ VE1, VE2 ≤ VDD1 or VDD2 | 4 |
| Logic High Input Threshold (5 V) | VIH, VEH | 2 | V | 4 | |||
| Logic Low Input Threshold (5 V) | VIL, VEL | 0.8 | V | 4 | |||
| Logic High Output Voltage, 20 µA (5 V) | VOAH, VOBH, VOCH, VODH | 5 | V | IOx = −20 µA, VIx = VIxH; printed min is (VDD1 or VDD2) − 0.1 V | 4 | ||
| Logic High Output Voltage, 4 mA (5 V) | VOAH, VOBH, VOCH, VODH | 4.8 | V | IOx = −4 mA, VIx = VIxH; printed min is (VDD1 or VDD2) − 0.4 V | 4 | ||
| Logic Low Output Voltage, 20 µA (5 V/3 V, all models) | VOAL, VOBL, VOCL, VODL | 0 | 0.1 | V | IOx = 20 µA, VIx = VIxL | 4 | |
| Logic Low Output Voltage, 400 µA (all models) | VOAL, VOBL, VOCL, VODL | 0.04 | 0.1 | V | IOx = 400 µA, VIx = VIxL | 4 | |
| Logic Low Output Voltage, 4 mA (all models) | VOAL, VOBL, VOCL, VODL | 0.2 | 0.4 | V | IOx = 4 mA, VIx = VIxL | 4 | |
| Minimum Pulse Width, ARW (5 V) | PW | 1000 | ns | CL = 15 pF, CMOS signal levels | 4 | ||
| Maximum Data Rate, ARW (5 V) | 1 | Mbps | CL = 15 pF, CMOS signal levels | 4 | |||
| Propagation Delay, ARW (5 V) | tPHL, tPLH | 50 | 65 | 100 | ns | CL = 15 pF, CMOS signal levels | 4 |
| Pulse Width Distortion, /tPLH − tPHL/, ARW (5 V) | PWD | 40 | ns | CL = 15 pF, CMOS signal levels | 5 | ||
| Change vs. Temperature, ARW (5 V) | 11 | ps/°C | CL = 15 pF, CMOS signal levels | 5 | |||
| Propagation Delay Skew, ARW (5 V) | tPSK | 50 | ns | CL = 15 pF, CMOS signal levels | 5 | ||
| Channel-to-Channel Matching, ARW (5 V) | tPSKCD/tPSKOD | 50 | ns | CL = 15 pF, CMOS signal levels | 5 | ||
| Output Disable Propagation Delay (High/Low to High Impedance) | tPHZ, tPLH | 6 | 8 | ns | CL = 15 pF, CMOS signal levels | 5 | |
| Output Enable Propagation Delay (High Impedance to High/Low) | tPZH, tPZL | 6 | 8 | ns | CL = 15 pF, CMOS signal levels | 5 | |
| Output Rise/Fall Time (10% to 90%), 5 V | tR/tF | 2.5 | ns | CL = 15 pF, CMOS signal levels | 5 | ||
| Common-Mode Transient Immunity at Logic High Output | /CMH/ | 25 | 35 | kV/µs | VIx = VDD1 or VDD2, VCM = 1000 V, transient magnitude = 800 V | 5 | |
| Common-Mode Transient Immunity at Logic Low Output | /CML/ | 25 | 35 | kV/µs | VIx = 0 V, VCM = 1000 V, transient magnitude = 800 V | 5 | |
| Input Supply Current per Channel, Quiescent (3 V) | IDDI (Q) | 0.26 | 0.31 | mA | 6 | ||
| Output Supply Current per Channel, Quiescent (3 V) | IDDO (Q) | 0.11 | 0.14 | mA | 6 | ||
| ADuM1402 VDD1 or VDD2 Supply Current (3 V) | IDD1 (Q), IDD2 (Q) | 0.9 | 1.5 | mA | DC to 1 MHz logic signal freq. | 6 | |
| Logic High Input Threshold (3 V) | VIH, VEH | 1.6 | V | 6 | |||
| Logic Low Input Threshold (3 V) | VIL, VEL | 0.4 | V | 6 | |||
| Logic High Output Voltage, 20 µA (3 V) | VOAH, VOBH, VOCH, VODH | 3 | V | IOx = −20 µA, VIx = VIxH; printed min is (VDD1 or VDD2) − 0.1 V | 6 | ||
| Logic High Output Voltage, 4 mA (3 V) | VOAH, VOBH, VOCH, VODH | 2.8 | V | IOx = −4 mA, VIx = VIxH; printed min is (VDD1 or VDD2) − 0.4 V | 6 | ||
| Propagation Delay, ARW (3 V) | tPHL, tPLH | 50 | 75 | 100 | ns | CL = 15 pF, CMOS signal levels | 6 |
| Output Rise/Fall Time (10% to 90%), 3 V | tR/tF | 3 | ns | CL = 15 pF, CMOS signal levels | 7 | ||
| Input Supply Current per Channel, Quiescent (5 V/3 V operation) | IDDI (Q) | 0.5 | 0.53 | mA | 8 | ||
| Input Supply Current per Channel, Quiescent (3 V/5 V operation) | IDDI (Q) | 0.26 | 0.31 | mA | 8 | ||
| Output Supply Current per Channel, Quiescent (5 V/3 V operation) | IDDO (Q) | 0.11 | 0.14 | mA | 8 | ||
| Output Supply Current per Channel, Quiescent (3 V/5 V operation) | IDDO (Q) | 0.19 | 0.21 | mA | 8 | ||
| ADuM1402 VDD1 Supply Current, DC to 2 Mbps (5 V/3 V operation) | IDD1 (Q) | 1.5 | 2.1 | mA | DC to 1 MHz logic signal freq. | 9 | |
| ADuM1402 VDD1 Supply Current, DC to 2 Mbps (3 V/5 V operation) | IDD1 (Q) | 0.9 | 1.5 | mA | DC to 1 MHz logic signal freq. | 9 | |
| ADuM1402 VDD2 Supply Current, DC to 2 Mbps (5 V/3 V operation) | IDD2 (Q) | 0.9 | 1.5 | mA | DC to 1 MHz logic signal freq. | 9 | |
| ADuM1402 VDD2 Supply Current, DC to 2 Mbps (3 V/5 V operation) | IDD2 (Q) | 1.5 | 2.1 | mA | DC to 1 MHz logic signal freq. | 9 | |
| Logic High Input Threshold (5 V/3 V operation) | VIH, VEH | 2 | V | 9 | |||
| Logic High Input Threshold (3 V/5 V operation) | VIH, VEH | 1.6 | V | 9 | |||
| Logic Low Input Threshold (5 V/3 V operation) | VIL, VEL | 0.8 | V | 9 | |||
| Logic Low Input Threshold (3 V/5 V operation) | VIL, VEL | 0.4 | V | 9 | |||
| Propagation Delay, ARW (mixed 5 V/3 V or 3 V/5 V) | tPHL, tPLH | 50 | 70 | 100 | ns | CL = 15 pF, CMOS signal levels | 9 |
| Output Rise/Fall Time (10% to 90%) (5 V/3 V operation) | tR/tF | 3 | ns | CL = 15 pF, CMOS signal levels | 10 | ||
| Output Rise/Fall Time (10% to 90%) (3 V/5 V operation) | tR/tF | 2.5 | ns | CL = 15 pF, CMOS signal levels | 10 | ||
| IC Junction-to-Case Thermal Resistance, Side 1 | θJCI | 33 | °C/W | Thermocouple located at center of package underside | 19 | ||
| IC Junction-to-Case Thermal Resistance, Side 2 | θJCO | 28 | °C/W | Thermocouple located at center of package underside | 19 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | given channel, respectively. See the PC Board Layout section. 5 See Figure 4 for maximum rated current values for various temperatures. 6 This refers to common-mode transients across the insulation ba | 21 |
CAD (KiCad official)
- Symbol:
ADUM1402ARWZ-RL - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
adum1402arwz-rl-etched.step/adum1402arwz-rl-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adum1402arwz-rl.step/adum1402arwz-rl.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (32 pp, sha256
1f063e92f3a10974, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).