main
History Download
Ray Publish 0.1.0 d8cffcc

ADS8698IDBT

Texas Instruments · Data Converters · TSSOP-38

ADS8698IDBT from Texas Instruments, in a TSSOP-38. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 SDI input Serial data input used by the host to program the internal device registers.
2 RST/PD input Dual-function pin that resets the program registers when low for no longer than 100 ns or powers down the device when low for at least 400 ns.
3 DAISY input Serial input that chains data in daisy-chain mode and is tied to GND for a stand-alone device.
4 REFSEL input Active-low logic input that enables the internal reference when low and selects external reference input mode when high.
5 REFIO bidirectional Internal reference output or external reference input pin, to be decoupled with REFGND on pin 6.
6 REFGND power_in Reference ground pin that must be shorted to the analog GND plane and decoupled with REFIO and REFCAP.
7 REFCAP output ADC reference decoupling pin that requires a minimum 10 µF capacitor to REFGND, with a 1 µF capacitor placed close to the pin.
8 AGND power_in Analog ground pin to be decoupled with AVDD on pin 9.
9 AVDD power_in Analog supply pin with a recommended range of 4.75 V to 5.25 V, decoupled with AGND on pin 8.
10 AUX_IN input Positive input of the auxiliary channel, which accepts 0 V to VREF and is decoupled with AUX_GND on pin 11.
11 AUX_GND input Negative input of the auxiliary channel, which must be tied to GND and is decoupled with AUX_IN on pin 10.
12 AIN_6P input Analog input channel 6 positive input, decoupled with AIN_6GND on pin 13.
13 AIN_6GND input Analog input channel 6 negative input, decoupled with AIN_6P on pin 12.
14 AIN_7P input Analog input channel 7 positive input, decoupled with AIN_7GND on pin 15.
15 AIN_7GND input Analog input channel 7 negative input, decoupled with AIN_7P on pin 14.
16 AIN_0P input Analog input channel 0 positive input, decoupled with AIN_0GND on pin 17.
17 AIN_0GND input Analog input channel 0 negative input, decoupled with AIN_0P on pin 16.
18 AIN_1P input Analog input channel 1 positive input, decoupled with AIN_1GND on pin 19.
19 AIN_1GND input Analog input channel 1 negative input, decoupled with AIN_1P on pin 18.
20 AIN2_GND input Analog input channel 2 negative input, decoupled with AIN_2P on pin 21.
21 AIN_2P input Analog input channel 2 positive input, decoupled with AIN_2GND on pin 20.
22 AIN_3GND input Analog input channel 3 negative input, decoupled with AIN_3P on pin 23.
23 AIN_3P input Analog input channel 3 positive input, decoupled with AIN_3GND on pin 22.
24 AIN_4GND input Analog input channel 4 negative input, decoupled with AIN_4P on pin 25.
25 AIN_4P input Analog input channel 4 positive input, decoupled with AIN_4GND on pin 24.
26 AIN_5GND input Analog input channel 5 negative input, decoupled with AIN_5P on pin 27.
27 AIN_5P input Analog input channel 5 positive input, decoupled with AIN_5GND on pin 26.
28 AGND power_in Analog ground pin.
29 AGND power_in Analog ground pin.
30 AVDD power_in Analog supply pin, decoupled with AGND on pin 31.
31 AGND power_in Analog ground pin, decoupled with AVDD on pin 30.
32 AGND power_in Analog ground pin.
33 DGND power_in Digital ground pin, decoupled with DVDD on pin 34.
34 DVDD power_in Digital supply pin with a range of 1.65 V to AVDD, decoupled with DGND on pin 33.
35 ALARM output Active-high alarm output that changes state on the 16th falling edge of SCLK when any channel alarm trips.
36 SDO output Serial data output that goes to Hi-Z when CS is high and carries conversion data.
37 SCLK input Clock input for serial communication, with all synchronous accesses timed to its falling edges.
38 CS input Active-low chip-select input that triggers a conversion on its falling edge.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-38
Category Data Converters
Pins 38

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
AVDD to GND or DVDD to GND AVDD -0.3 7 V 5
AIN_nP, AIN_nGND to GND AIN_nP -20 20 V AVDD = 5 V or low impedance < 30 kΩ 5
AIN_nP, AIN_nGND to GND AIN_nP -11 11 V AVDD floating with impedance > 30 kΩ 5
AUX_GND to GND AUX_GND -0.3 0.3 V 5
REFCAP to REFGND or REFIO to REFGND REFCAP -0.3 5.7 V 5
GND to REFGND GND -0.3 0.3 V 5
Operating temperature TA -40 125 °C 5
Storage temperature Tstg -65 150 °C 5
Analog supply voltage AVDD 4.75 5 5.25 V 5
Digital supply voltage DVDD 1.65 3.3 V 5
Overvoltage protection voltage VOVP -20 20 V AVDD = 5 V or low impedance < 30 kΩ, all input ranges 6
Overvoltage protection voltage VOVP -11 11 V AVDD = floating with impedance > 30 kΩ, all input ranges 6
Full-scale input span (AIN_nP to AIN_nGND) -2.5 2.5 V Input range = ±2.5 × VREF 6
Operating input range, AIN_nGND negative input -0.1 0 0.1 V All input ranges 6
Input impedance zi 0.85 1 1.15 MΩ At TA = 25°C, all input ranges 6
Input impedance drift 7 25 ppm/°C All input ranges 6
Differential nonlinearity DNL -0.99 0.5 2 LSB 7
Integral nonlinearity INL -5 1.5 5 LSB Endpoint INL 7
Gain error EG -0.05 0.02 0.05 %FSR At TA = 25°C, all input ranges 7
Gain error matching (channel-to-channel) -0.05 0.02 0.05 %FSR At TA = 25°C, all input ranges 7
Gain error temperature drift 1 4 ppm/°C All input ranges 7
Offset error EO -1.5 0.5 1.5 mV At TA = 25°C, input range = ±0.625 × VREF 7
Offset error EO -1 0.5 1 mV At TA = 25°C, input range = ±2.5 × VREF 7
Offset error temperature drift 1 3 ppm/°C All input ranges 7
Signal-to-noise ratio (VIN, 0.5 dBFS at 1 kHz) SNR 91 93.5 dB Input range = ±2.5 × VREF 8
Total harmonic distortion (VIN, 0.5 dBFS at 1 kHz) THD -105 dB All input ranges 8
Signal-to-noise + distortion (VIN, 0.5 dBFS at 1 kHz) SINAD 90 93.5 dB Input range = ±2.5 × VREF 8
Differential nonlinearity (AUX channel) DNL -0.99 0.6 1.5 LSB 8
Integral nonlinearity (AUX channel) INL -4 1.5 4 LSB 8
Gain error (AUX channel) EG(AUX) -0.2 0.02 0.2 %FSR At TA = 25°C 8
Offset error (AUX channel) EO(AUX) -5 5 mV At TA = 25°C 8
Voltage on REFIO pin (configured as output) V(REFIO_INT) 4.095 4.096 4.097 V At TA = 25°C 9
Internal reference temperature drift 6 10 ppm/°C 9
Decoupling capacitor on REFIO C(OUT_REFIO) 10 22 µF 9
Reference voltage to ADC on REFCAP pin V(REFCAP) 4.095 4.096 4.097 V At TA = 25°C 9
Reference buffer output impedance 0.5 1 Ω 9
Reference buffer temperature drift 0.6 1.5 ppm/°C 9
Decoupling capacitor on REFCAP C(OUT_REFCAP) 10 22 μF 9
External reference voltage on REFIO (configured as input) VREFIO_EXT 4.046 4.096 4.146 V 9
Analog power-supply voltage AVDD 4.75 5 5.25 V Analog supply 9
Digital power-supply voltage for specified performance DVDD 2.7 3.3 5.25 V Digital supply range for specified performance 9
Analog supply current, dynamic (ADS8698) IAVDD_DYN 13 16 mA AVDD = 5 V, fS = maximum and internal reference 9
Analog supply current, static (ADS8698) IAVDD_STC 10 12 mA AVDD = 5 V, device not converting and internal reference 9
Standby current ISTDBY 3 4.5 mA At AVDD = 5 V, device in STDBY mode and internal reference 9
Power-down current IPWR_DN 3 20 μA At AVDD = 5 V, device in PWR_DN 9
Digital input logic high level VIH 0.7 V DVDD > 2.1 V, min 0.7 × DVDD, max DVDD + 0.3 9
Digital input logic low level VIL -0.3 0.3 V DVDD > 2.1 V, min -0.3, max 0.3 × DVDD 9
Digital input logic high level VIH 0.8 V DVDD ≤ 2.1 V, min 0.8 × DVDD, max DVDD + 0.3 9
Digital input logic low level VIL -0.3 0.2 V DVDD ≤ 2.1 V, min -0.3, max 0.2 × DVDD 9
Digital output logic high level VOH 0.8 1 V IO = 500-μA source, min 0.8 × DVDD, max DVDD 9
Digital output logic low level VOL 0 0.2 V IO = 500-μA sink, max 0.2 × DVDD 9
Serial clock high time tPH_CK 0.4 0.6 tSCLK 10
Serial clock low time tPL_CK 0.4 0.6 tSCLK 10
Junction-to-ambient thermal resistance RθJA 68.8 °C/W 5
Junction-to-case (top) thermal resistance RθJC(top) 19.9 °C/W 5
Junction-to-board thermal resistance RθJB 30.4 °C/W 5
Junction-to-top characterization parameter ψJT 1.3 °C/W 5
Junction-to-board characterization parameter ψJB 29.8 °C/W 5

CAD (Adom-generated)

  • Symbol: ADS8698IDBT
  • Footprint: Adom_Gen:Texas_Instruments_ADS8698_a15718
  • 3D model: generated to fit the land (STEP)
  • 3D model files: ads8698idbt-etched.step / ads8698idbt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ads8698idbt.step / ads8698idbt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (79 pp, sha256 7b731788c88fd068, retrieved 2026-11-16, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.

Datasheet PDF