Generated by adom_assets · KiCad file format 20240108
ADS8698IDBT
Texas Instruments · Data Converters · TSSOP-38
ADS8698IDBT from Texas Instruments, in a TSSOP-38. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SDI | input | Serial data input used by the host to program the internal device registers. |
| 2 | RST/PD | input | Dual-function pin that resets the program registers when low for no longer than 100 ns or powers down the device when low for at least 400 ns. |
| 3 | DAISY | input | Serial input that chains data in daisy-chain mode and is tied to GND for a stand-alone device. |
| 4 | REFSEL | input | Active-low logic input that enables the internal reference when low and selects external reference input mode when high. |
| 5 | REFIO | bidirectional | Internal reference output or external reference input pin, to be decoupled with REFGND on pin 6. |
| 6 | REFGND | power_in | Reference ground pin that must be shorted to the analog GND plane and decoupled with REFIO and REFCAP. |
| 7 | REFCAP | output | ADC reference decoupling pin that requires a minimum 10 µF capacitor to REFGND, with a 1 µF capacitor placed close to the pin. |
| 8 | AGND | power_in | Analog ground pin to be decoupled with AVDD on pin 9. |
| 9 | AVDD | power_in | Analog supply pin with a recommended range of 4.75 V to 5.25 V, decoupled with AGND on pin 8. |
| 10 | AUX_IN | input | Positive input of the auxiliary channel, which accepts 0 V to VREF and is decoupled with AUX_GND on pin 11. |
| 11 | AUX_GND | input | Negative input of the auxiliary channel, which must be tied to GND and is decoupled with AUX_IN on pin 10. |
| 12 | AIN_6P | input | Analog input channel 6 positive input, decoupled with AIN_6GND on pin 13. |
| 13 | AIN_6GND | input | Analog input channel 6 negative input, decoupled with AIN_6P on pin 12. |
| 14 | AIN_7P | input | Analog input channel 7 positive input, decoupled with AIN_7GND on pin 15. |
| 15 | AIN_7GND | input | Analog input channel 7 negative input, decoupled with AIN_7P on pin 14. |
| 16 | AIN_0P | input | Analog input channel 0 positive input, decoupled with AIN_0GND on pin 17. |
| 17 | AIN_0GND | input | Analog input channel 0 negative input, decoupled with AIN_0P on pin 16. |
| 18 | AIN_1P | input | Analog input channel 1 positive input, decoupled with AIN_1GND on pin 19. |
| 19 | AIN_1GND | input | Analog input channel 1 negative input, decoupled with AIN_1P on pin 18. |
| 20 | AIN2_GND | input | Analog input channel 2 negative input, decoupled with AIN_2P on pin 21. |
| 21 | AIN_2P | input | Analog input channel 2 positive input, decoupled with AIN_2GND on pin 20. |
| 22 | AIN_3GND | input | Analog input channel 3 negative input, decoupled with AIN_3P on pin 23. |
| 23 | AIN_3P | input | Analog input channel 3 positive input, decoupled with AIN_3GND on pin 22. |
| 24 | AIN_4GND | input | Analog input channel 4 negative input, decoupled with AIN_4P on pin 25. |
| 25 | AIN_4P | input | Analog input channel 4 positive input, decoupled with AIN_4GND on pin 24. |
| 26 | AIN_5GND | input | Analog input channel 5 negative input, decoupled with AIN_5P on pin 27. |
| 27 | AIN_5P | input | Analog input channel 5 positive input, decoupled with AIN_5GND on pin 26. |
| 28 | AGND | power_in | Analog ground pin. |
| 29 | AGND | power_in | Analog ground pin. |
| 30 | AVDD | power_in | Analog supply pin, decoupled with AGND on pin 31. |
| 31 | AGND | power_in | Analog ground pin, decoupled with AVDD on pin 30. |
| 32 | AGND | power_in | Analog ground pin. |
| 33 | DGND | power_in | Digital ground pin, decoupled with DVDD on pin 34. |
| 34 | DVDD | power_in | Digital supply pin with a range of 1.65 V to AVDD, decoupled with DGND on pin 33. |
| 35 | ALARM | output | Active-high alarm output that changes state on the 16th falling edge of SCLK when any channel alarm trips. |
| 36 | SDO | output | Serial data output that goes to Hi-Z when CS is high and carries conversion data. |
| 37 | SCLK | input | Clock input for serial communication, with all synchronous accesses timed to its falling edges. |
| 38 | CS | input | Active-low chip-select input that triggers a conversion on its falling edge. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-38 |
| Category | Data Converters |
| Pins | 38 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| AVDD to GND or DVDD to GND | AVDD | -0.3 | 7 | V | 5 | ||
| AIN_nP, AIN_nGND to GND | AIN_nP | -20 | 20 | V | AVDD = 5 V or low impedance < 30 kΩ | 5 | |
| AIN_nP, AIN_nGND to GND | AIN_nP | -11 | 11 | V | AVDD floating with impedance > 30 kΩ | 5 | |
| AUX_GND to GND | AUX_GND | -0.3 | 0.3 | V | 5 | ||
| REFCAP to REFGND or REFIO to REFGND | REFCAP | -0.3 | 5.7 | V | 5 | ||
| GND to REFGND | GND | -0.3 | 0.3 | V | 5 | ||
| Operating temperature | TA | -40 | 125 | °C | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Analog supply voltage | AVDD | 4.75 | 5 | 5.25 | V | 5 | |
| Digital supply voltage | DVDD | 1.65 | 3.3 | V | 5 | ||
| Overvoltage protection voltage | VOVP | -20 | 20 | V | AVDD = 5 V or low impedance < 30 kΩ, all input ranges | 6 | |
| Overvoltage protection voltage | VOVP | -11 | 11 | V | AVDD = floating with impedance > 30 kΩ, all input ranges | 6 | |
| Full-scale input span (AIN_nP to AIN_nGND) | -2.5 | 2.5 | V | Input range = ±2.5 × VREF | 6 | ||
| Operating input range, AIN_nGND negative input | -0.1 | 0 | 0.1 | V | All input ranges | 6 | |
| Input impedance | zi | 0.85 | 1 | 1.15 | MΩ | At TA = 25°C, all input ranges | 6 |
| Input impedance drift | 7 | 25 | ppm/°C | All input ranges | 6 | ||
| Differential nonlinearity | DNL | -0.99 | 0.5 | 2 | LSB | 7 | |
| Integral nonlinearity | INL | -5 | 1.5 | 5 | LSB | Endpoint INL | 7 |
| Gain error | EG | -0.05 | 0.02 | 0.05 | %FSR | At TA = 25°C, all input ranges | 7 |
| Gain error matching (channel-to-channel) | -0.05 | 0.02 | 0.05 | %FSR | At TA = 25°C, all input ranges | 7 | |
| Gain error temperature drift | 1 | 4 | ppm/°C | All input ranges | 7 | ||
| Offset error | EO | -1.5 | 0.5 | 1.5 | mV | At TA = 25°C, input range = ±0.625 × VREF | 7 |
| Offset error | EO | -1 | 0.5 | 1 | mV | At TA = 25°C, input range = ±2.5 × VREF | 7 |
| Offset error temperature drift | 1 | 3 | ppm/°C | All input ranges | 7 | ||
| Signal-to-noise ratio (VIN, 0.5 dBFS at 1 kHz) | SNR | 91 | 93.5 | dB | Input range = ±2.5 × VREF | 8 | |
| Total harmonic distortion (VIN, 0.5 dBFS at 1 kHz) | THD | -105 | dB | All input ranges | 8 | ||
| Signal-to-noise + distortion (VIN, 0.5 dBFS at 1 kHz) | SINAD | 90 | 93.5 | dB | Input range = ±2.5 × VREF | 8 | |
| Differential nonlinearity (AUX channel) | DNL | -0.99 | 0.6 | 1.5 | LSB | 8 | |
| Integral nonlinearity (AUX channel) | INL | -4 | 1.5 | 4 | LSB | 8 | |
| Gain error (AUX channel) | EG(AUX) | -0.2 | 0.02 | 0.2 | %FSR | At TA = 25°C | 8 |
| Offset error (AUX channel) | EO(AUX) | -5 | 5 | mV | At TA = 25°C | 8 | |
| Voltage on REFIO pin (configured as output) | V(REFIO_INT) | 4.095 | 4.096 | 4.097 | V | At TA = 25°C | 9 |
| Internal reference temperature drift | 6 | 10 | ppm/°C | 9 | |||
| Decoupling capacitor on REFIO | C(OUT_REFIO) | 10 | 22 | µF | 9 | ||
| Reference voltage to ADC on REFCAP pin | V(REFCAP) | 4.095 | 4.096 | 4.097 | V | At TA = 25°C | 9 |
| Reference buffer output impedance | 0.5 | 1 | Ω | 9 | |||
| Reference buffer temperature drift | 0.6 | 1.5 | ppm/°C | 9 | |||
| Decoupling capacitor on REFCAP | C(OUT_REFCAP) | 10 | 22 | μF | 9 | ||
| External reference voltage on REFIO (configured as input) | VREFIO_EXT | 4.046 | 4.096 | 4.146 | V | 9 | |
| Analog power-supply voltage | AVDD | 4.75 | 5 | 5.25 | V | Analog supply | 9 |
| Digital power-supply voltage for specified performance | DVDD | 2.7 | 3.3 | 5.25 | V | Digital supply range for specified performance | 9 |
| Analog supply current, dynamic (ADS8698) | IAVDD_DYN | 13 | 16 | mA | AVDD = 5 V, fS = maximum and internal reference | 9 | |
| Analog supply current, static (ADS8698) | IAVDD_STC | 10 | 12 | mA | AVDD = 5 V, device not converting and internal reference | 9 | |
| Standby current | ISTDBY | 3 | 4.5 | mA | At AVDD = 5 V, device in STDBY mode and internal reference | 9 | |
| Power-down current | IPWR_DN | 3 | 20 | μA | At AVDD = 5 V, device in PWR_DN | 9 | |
| Digital input logic high level | VIH | 0.7 | V | DVDD > 2.1 V, min 0.7 × DVDD, max DVDD + 0.3 | 9 | ||
| Digital input logic low level | VIL | -0.3 | 0.3 | V | DVDD > 2.1 V, min -0.3, max 0.3 × DVDD | 9 | |
| Digital input logic high level | VIH | 0.8 | V | DVDD ≤ 2.1 V, min 0.8 × DVDD, max DVDD + 0.3 | 9 | ||
| Digital input logic low level | VIL | -0.3 | 0.2 | V | DVDD ≤ 2.1 V, min -0.3, max 0.2 × DVDD | 9 | |
| Digital output logic high level | VOH | 0.8 | 1 | V | IO = 500-μA source, min 0.8 × DVDD, max DVDD | 9 | |
| Digital output logic low level | VOL | 0 | 0.2 | V | IO = 500-μA sink, max 0.2 × DVDD | 9 | |
| Serial clock high time | tPH_CK | 0.4 | 0.6 | tSCLK | 10 | ||
| Serial clock low time | tPL_CK | 0.4 | 0.6 | tSCLK | 10 | ||
| Junction-to-ambient thermal resistance | RθJA | 68.8 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 19.9 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 30.4 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 1.3 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 29.8 | °C/W | 5 |
CAD (Adom-generated)
- Symbol:
ADS8698IDBT - Footprint:
Adom_Gen:Texas_Instruments_ADS8698_a15718 - 3D model: generated to fit the land (STEP)
- 3D model files:
ads8698idbt-etched.step/ads8698idbt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ads8698idbt.step/ads8698idbt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (79 pp, sha256
7b731788c88fd068, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.